Hi,
I have a problem with a TDM400P card configuration. Incoming calls are
answered by asterisk, asterisk place the call on the destination
ATA/analog-phone, the phone begins to ring and when our recepcionist pickup
the phone to play a welcome message, she nothing hear on the line during
five or s
On Fri, Nov 24, 2006 at 02:25:38PM +0100, Anton Frolov wrote:
>
>
> Tzafrir Cohen wrote:
> >
> > And probably fxsks=3: I'm not sure whether or not KS is used in the
> > French telco .
>
> signalling=fxs_ks
Nitpicking:
'signalling=fxs_ks' is the line to add to /etc/asterisk/zapata.conf .
'fxsk
Hi,
i receive a call on my analog line but my asterisk don't answer ;=)
do you know if they hae a solution for know if the card see the call ?
for see if it's not my cable don't work ..
thanks bye
___
--Bandwidth and Colocation provided by Easynews.
for see if the card answer, what is the process ?
since your port is configured to be in the "interne" context, just add
this to this context
exten => s,1,Answer
exten => s,2,Playback(tt-monkeys)
exten => s,3,Hangup
watch the console and dial-in. if you get monkeys screaming at you, it worked !
Noc Phibee wrote:
>
> small question if you know the TDM400P: if the fxo module are
> at the slot 4, the RJ11 connector are the number 4 ?
accordingly to the documentation I have, yes, it's the connector #4.
btw, why don't you put your module to the first slot? In this case you
would avoid th
> >>
> >> In my zaptel.conf, i have:
> >>loadzone=fr
> >>defaultzone=fr
> >>fxols=3
loadzone=fr
defaultzone=fr
fxsls=4
> >>
> >> my zapata.conf:
> >> [trunkgroups]
> >>
> >> [channels]
> >> context=default
> >> signalling=fxo_ls
signalling=fxs_ls
> >> usecallerid=yes
> >> hidecall
Tzafrir Cohen a écrit :
* Use genzaptelconf from xpp/utils/genzaptelconf to save you from this
guesswork.
Hi,
thanks ;=) with genzaptelconf, now that's works ...
correct channel are put into zaptel.conf and zapata.conf
small question if you know the TDM400P: if the fxo module are
at the
Tzafrir Cohen wrote:
>
> And probably fxsks=3: I'm not sure whether or not KS is used in the
> French telco .
signalling=fxs_ks
works Ok in France with both: France Telecom and Freebox.
AF.
___
--Bandwidth and Colocation provided by Easynews.com --
A summary of some of the mistakes in this thread, as it was full of
them.
On Fri, Nov 24, 2006 at 06:32:14AM +0100, Noc Phibee wrote:
> Hi
>
> i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect
> my asterisk to a french analog line.
>
> In my zaptel.conf, i have:
>loadzone=fr
Noc Phibee wrote:
Thanks for your help,
a cat:
[EMAIL PROTECTED] zap]# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"
1 WCTDM/0/0 FXSKS
2 WCTDM/0/1
3 WCTDM/0/2
4 WCTDM/0/3
in my zaptel.conf, i have only:
loadzone=fr
defaultzone=fr
fx
Hi Noc,
why channel 5 in zapata? It must be channel 1 the same as in zaptel.conf.
Giorgio Incantalupo
Noc Phibee wrote:
Pranav Peshwe a écrit :
Hi,
Check your /etc/zaptel.conf and ensure that it has the right kind of
signalling set for the same channel number as that in you zapata.conf.
do :
Pranav Peshwe a écrit :
Hi,
Check your /etc/zaptel.conf and ensure that it has the right kind of
signalling set for the same channel number as that in you zapata.conf.
do : cat /proc/zaptel/1
and it should show channels and the effective signalling settings for
them.
If signalling does not app
Leo Ann Boon a écrit :
Noc Phibee wrote:
thanks for this information, but no change:
Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel
4: No such device or address
Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No
such device or address
here = 0, tmp->
Noc Phibee wrote:
thanks for this information, but no change:
Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4:
No such device or address
Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No
such device or address
here = 0, tmp->channel = 4, channel = 4
No
Noc Phibee wrote:
thanks for this information, but no change:
Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4:
No such device or address
Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No
such device or address
here = 0, tmp->channel = 4, channel = 4
N
thanks for this information, but no change:
Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4:
No such device or address
Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No
such device or address
here = 0, tmp->channel = 4, channel = 4
Nov 24 10:32:42 ERROR
Noc Phibee wrote:
Thanks Giogio,
but no i don't have this module
bye
Check your zapata.conf. Your signalling and channel settings are wrong
for FXO module.
signalling=fxs_ls
channel=> 4
FXO module use fxs signalling, FXS module use fxo signalling.
Leo.
___
Noc,
it seems your zap*.conf are okhave you tried to do all the modules
loading procedure step by step?
ztcfg -s
modprobe -r wctdm
modprobe wctdm
ztcfg -vv
Giorgio Incantalupo
Noc Phibee wrote:
Thanks Giogio,
but no i don't have this module
bye
Giorgio Incantalupo a écrit :
Hi
Thanks Giogio,
but no i don't have this module
bye
Giorgio Incantalupo a écrit :
Hi Noc,
I had similar problem. Check If you have netjetpci module and try to
delete it...this solved my problem.
Giorgio Incantalupo
Noc Phibee wrote:
Hi
i have buy a Digium TDM400P with 1 fxo modules T
Hi Noc,
I had similar problem. Check If you have netjetpci module and try to
delete it...this solved my problem.
Giorgio Incantalupo
Noc Phibee wrote:
Hi
i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect
my asterisk to a french analog line.
In my zaptel.conf, i have:
l
Hi
i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect
my asterisk to a french analog line.
In my zaptel.conf, i have:
loadzone=fr
defaultzone=fr
fxols=3
when i load the module, i have in logs:
Nov 24 06:13:40 gw kernel: Freed a Wildcard
Nov 24 06:13:40 gw kernel: Zapata T
21 matches
Mail list logo
