If you need to know what the provisioning XML should look like for a 3PCC
build of a Cisco 78xx or 88xx phone, then let it boot without provisioning,
and then log in to its web interface. Select admin mode and log-in if
necessary. Then edit the URL in the browser from:
http://ip-address/admin/
to
Thank you for the information. Actually the phone came with sip firmware. I
tried with TFTP with SEPMAC.CNF.XML and other relevant xml files. But the
phone stuck with blank screen while bootup.
And Cisco TAC support says, the phones part number is with enterprise
firmware and it can't work with As
On 05/12/16 17:57, Gopalakrishnan N wrote:
True agree, problem is somehow the people purchased am supporting to
overcome that. Trying level best... around 20 phones has been
purchased
I have been able to use the following Cisco IP Phone with Asterisk.
- Cisco SPA303, Cisco SPA504,
TrueAgree.
:)
On Mon, Dec 5, 2016 at 11:37 PM wrote:
> > True agree, problem is somehow the people purchased am
> > supporting to overcome that. Trying level best... around 20
> > phones has been purchased
>
> Ah, yes, the "we purchased these without consulting you, but it
> True agree, problem is somehow the people purchased am
> supporting to overcome that. Trying level best... around 20
> phones has been purchased
Ah, yes, the "we purchased these without consulting you, but it is up to
you to make them work" school of thought. It often goes with, "
True agree, problem is somehow the people purchased am supporting to
overcome that. Trying level best... around 20 phones has been
purchased
😔😔
On Mon, 5 Dec 2016, 8:55 p.m. Victor Villarreal,
wrote:
> With all the money you plan to invest in firmware, licenses, etc., you
> have bou
With all the money you plan to invest in firmware, licenses, etc., you have
bought a Grandstream IP phone or Yealink...
--
_
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk communi
Actually now I have the phones with SIP firmware. I will try with 3pcc
firmware along with XML files.
Or any idea if we have CUCM application can we change the firmware. am
ready to buy the developer edition.
Regards .
On Mon, 5 Dec 2016, 3:34 p.m. Steve Davies, wrote:
> I tried... repeatedly
I tried... repeatedly... I failed. I bought some 3PCC phones, and they just
worked.
If you have the relevant Cisco telephony server product you might be able
to trick it into doing what you want, as that has the proper upgrader for
that model of phone.
I previously had experience of upgrading the
Can't I upload the 3PCC firmware ? available from the Cisco website?
Actually it came with sip88xx firmware.
Regards .
On Fri, 2 Dec 2016, 10:38 p.m. Steve Davies, wrote:
> Hi,
>
> You have to buy the 3PCC version for this to work. Once you have this,
> they work very much like the Cisco S
Hi,
You have to buy the 3PCC version for this to work. Once you have this, they
work very much like the Cisco SPA handsets.
I also ended up with a non-3PCC handset and it is useless, and as far as I
can tell they cannot be re-flashed.
Cheers,
Steve
On Fri, 2 Dec 2016 at 16:16 Gopalakrishnan N
Anyone tried integrating Cisco IP 8841 phone with Asterisk 11.x. I have the
phone with sip firmware came along with sip88xx-11.0.1SR xx. I tried to
upload woth TFTP due to some reason it's getting failed. Do I need to load
3pcc firmware or anyway to Configure from the phone itself or from the
GUI?
12 matches
Mail list logo
