Folks,
I've seen a few reports that people have had problems with hang up
detection on UK cable phone lines. I have a TDM400P with two FXO ports,
one connected to my BT line and the other connected to my
Telewest/Virgin Media cable line. If I ring the BT line and then clear
down, Asterisk detect
Mike,
Can you tell us :
- asterisk version
- zaptel version
When you call over this line, when you hangup did you hear an busy
tone ? or any class tone ? To do this test connect your lines to
analog phone and make a call. Let's us know the results.
Regards,
Luis Morales
On Fri, Oct 10, 2008 a
On Thu, 9 Oct 2008, Mike wrote:
> Folks,
>
> I've seen a few reports that people have had problems with hang up
> detection on UK cable phone lines. I have a TDM400P with two FXO ports,
> one connected to my BT line and the other connected to my
> Telewest/Virgin Media cable line. If I ring the
Ok!!
Do this finale test.
call fron analog lines to any number, wait until the called hang up.
Now tell us the signal tone. If the signal is busy ? or any thing
else
Your set up look ok. Now try with this options into zapata.conf header:
zapata.conf:
usecallerid=yes
hidecallerid=no
callwai
On Fri, 10 Oct 2008, Luis Morales wrote:
Ok!!
Do this finale test.
Who, me or the OP (Mike). My setup works OK and I've no intention of doing
tests, final or otherwise, thanks.
Gordon
call fron analog lines to any number, wait until the called hang up.
Now tell us the signal tone. If th
I have a TDM400 working quite well, Digium dialled in and recompiled
chan_zap with some changes , to get BT Callerid working and I have set
hangup on polarity in the zaptel.conf which seems to work well
this is a BT home line, not business, if you have a business line you
should get the DCT
On Fri, Oct 10, 2008 at 08:10:39AM +1930, Luis Morales wrote:
> Mike,
>
> Can you tell us :
>
> - asterisk version
> - zaptel version
>
> When you call over this line, when you hangup did you hear an busy
> tone ? or any class tone ? To do this test connect your lines to
> analog phone and make
Well,
Your case it's not easy. Try with ringtimeout=8000 (zapata.conf)
option. So it's very strange no signal on hang up. I have an question
for your test. Did you hang up first in your mobile and listen on the
phone for the signal ?
There are other option to play such as:
- hanguppolarityswitch
On Thu, 9 Oct 2008, Mike wrote:
> On Fri, Oct 10, 2008 at 08:10:39AM +1930, Luis Morales wrote:
>> Mike,
>>
>> Can you tell us :
>>
>> - asterisk version
>> - zaptel version
>>
>> When you call over this line, when you hangup did you hear an busy
>> tone ? or any class tone ? To do this test conne
On Thu, 9 Oct 2008, Mike wrote:
> Zaptel Version: 1.2.11
>
> Asterisk 1.2.13
>
> I called my mobile from the line and hung up. The line just went
> silent. There were no tones. I also watched the lamp on the phone, it
> didn't got out. I guess this could be because the line current isn't
> dro
On Sun, Oct 12, 2008 at 11:18:40AM +0100, Gordon Henderson wrote:
> On Thu, 9 Oct 2008, Mike wrote:
>
> I'm guessing this lamp is on an ordinary analogue phone you have?
>
Yeah, this is a bog standard 9 quid analogue phone.
>
> OK. A bit convoluted this as I'm not local to the PBX, but an IAX t
On Mon, 13 Oct 2008, Mike wrote:
> On Sun, Oct 12, 2008 at 11:18:40AM +0100, Gordon Henderson wrote:
>> On Thu, 9 Oct 2008, Mike wrote:
>>
>> I'm guessing this lamp is on an ordinary analogue phone you have?
>>
>
> Yeah, this is a bog standard 9 quid analogue phone.
>
>>
>> OK. A bit convoluted th
robb wrote:
> I have a TDM400 working quite well, Digium dialled in and recompiled
> chan_zap with some changes , to get BT Callerid working and I have
> set hangup on polarity in the zaptel.conf which seems to work well
>
> this is a BT home line, not business, if you have a business line you
>
13 matches
Mail list logo