I confess that I had already generated sip accounts but I just delete them.
it remains in the dialplan a2billing and RateCard I created ..
Please can you tell me how to complete the setup?
2012/6/22 Mikhail Lischuk
> **
>
>
>
> Gorguez Ka писал 22.06.2012 15:31:
>
> hello,
> I just installed a2b
Gorguez Ka писал 22.06.2012 15:31:
> hello,
> I just
installed a2billing, I did all the config, at least I guess ..
> but I
still can not integrate sip accounts that I had created (with sip.conf)
in a2billing to apply their billing ..
> could someone tell me how to
make the junction between as
hello,
I just installed a2billing, I did all the config, at least I guess ..
but I still can not integrate sip accounts that I had created (with sip.conf
) in a2billing to apply their billing ..
could someone tell me how to make the junction between asterisk and
a2billing??
I also noticed that the
We have had success with this:
https://sites.google.com/site/a2billing2asterisk/
On Fri, Mar 16, 2012 at 1:28 PM, Tahar .H wrote:
> hi folks,
>
> i was wondering if some one has a2billing script,which can be used to
> install a2billing easly ?
>
> thanks in advance
>
> --
> *
> HARAZ Tahar
>
hi folks,
i was wondering if some one has a2billing script,which can be used to
install a2billing easly ?
thanks in advance
--
*
HARAZ Tahar
*
*Engineering Student at the National Institute for Posts and
Telecommunications (INPT)
*
*
Phone: +212 6 78030050
E-mail: harazta...@gmail.com
*
--
__
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Baha @ SH
Sent: Monday, October 25, 2010 4:59 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] a2bill
er 25, 2010 10:01 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] a2billing muting "enter the phone number"
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Baha @ SH
Sent: Saturday, October 23, 2010 7:32 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [asterisk-users] a2billing mut
If you want to turn off the audio totally you can set audio to NO (it's
probably the 4th or 5th in list of Global settings). Otherway is to blank
the file responsible to play that file and keeping the settings intact.
However, there are numerous options to turn on and off the various
announcements
How can I mute the message "please enter the number you wish to call and
press the # key" in a2billing???
I tried
use_dnid = YES
but still I keep getting the message prompt...
thanks
--
_
-- Bandwidth and Colocation Provided b
t - Non-Commercial Discussion
> *Subject:* Re: [asterisk-users] a2billing
>
>
>
> I don't think voucher can be triggered to announce at certain threshold
> ONLY but it will be run everytime at the begining after PIN is asked for. By
> default it's set to: "Pr
10 8:17 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] a2billing
I don't think voucher can be triggered to announce at certain threshold ONLY
but it will be run everytime at the begining after PIN is asked for. By
default it's set to: &qu
awaiting,,,
>
>
>
> *From:* asterisk-users-boun...@lists.digium.com [mailto:
> asterisk-users-boun...@lists.digium.com] *On Behalf Of *bruce bruce
> *Sent:* Monday, October 18, 2010 12:46 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* Re: [asterisk-
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bruce bruce
Sent: Monday, October 18, 2010 12:46 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] a2billing
Turn on the voucher feature in System Settings and it will tell the user
right after the PIN
Turn on the voucher feature in System Settings and it will tell the user
right after the PIN authentication or CLID authentication that their balance
is below threshold and they should pay.
-Bruce
On Mon, Oct 18, 2010 at 2:35 PM, Baha @ SH wrote:
> Not sure if a2billing can be shared here, but
Not sure if a2billing can be shared here, but ill give a shot
If the credit < min_credit the IVR play: sorry you have 0 credit and hangup,
I want it to FW me to the IVR to add voucher, please let me know: here is
log:
[18/10/2010 07:01:12]:[file:a2billing.php -
line:75]:[CallerID:]:[CN:]:[IDCONFI
_
From: da...@debsinc.com
To: asterisk-users@lists.digium.com
Date: Thu, 30 Sep 2010 14:59:38 -0500
Subject: Re: [asterisk-users] a2billing
_
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Flavio Miranda
Sent
_0NXXX,1,AGI,a2billing.phpexten => _X.,1,AGI(a2billing.php,2)
Att,
Flavio Roberto Miranda
MSN:flaviormira...@hotmail.com
Skype: flaviormiranda
From: da...@debsinc.com
To: asterisk-users@lists.digium.com
Date: Thu, 30 Sep 2010 14:59:38 -0500
Subject: Re: [asterisk-users] a2billing
_
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Flavio Miranda
Sent: Thursday, September 30, 2010 2:44 PM
To: Asterisk Asterisk
Subject: [asterisk-users] a2billing
Hi all,
I am trying to integrate a2b with asterisk
Hi all,
I am trying to integrate a2b with asterisk 1.6, but ,when i try to do external
call, I receive this mensage:
-- Executing [01221341...@ramais:1] AGI("SIP/3000-b5ba6e80", "a2billing.php,2")
in new stack-- Launched AGI Script /var/lib/asterisk/agi-bin/a2billing.php
-- AGI Script
Hi,
Thank you !!
Att,
Flavio Roberto Miranda
MSN:flaviormira...@hotmail.com
Skype: flaviormiranda
> To: asterisk-users@lists.digium.com
> From: hvarda...@gmail.com
> Date: Mon, 27 Sep 2010 15:47:31 +0500
> Subject: Re: [asterisk-users] A2billing
>
> Hello
>
Hello
Change your a2b 1.8 version to a2b 1.7.1 version
1.7.1 version is a stable.
And forum for a2b is http://forum.asterisk2billing.org/index.php
--
Vardan Harutyunyan,
Senior System Administrator
Enterprise Incubator Foundation
123 Hovsep Emin Street,
Yerevan 0051, Republic of Armenia
Tel:
Hi,
I am trying to configure a2billing 1.8 in my asterisk 1.6 but no value to
DIALPREFIX and DESTINATION PREFIX is accepted when I try to create a RATE.
thanks!
Att,
Flavio Roberto Miranda
MSN:flaviormira...@hotmail.com
Skype: flaviormiranda
nto
> Alhambra-Eidos
>
>
> *De:* asterisk-users-boun...@lists.digium.com en nombre de Flavio Miranda
> *Enviado el:* jue 16/09/2010 2:24
> *Para:* Asterisk Asterisk
> *Asunto:* [asterisk-users] a2billing
>
> Hey there,
>
> I am trying to setup a2bill
...@lists.digium.com en nombre de Flavio Miranda
Enviado el: jue 16/09/2010 2:24
Para: Asterisk Asterisk
Asunto: [asterisk-users] a2billing
Hey there,
I am trying to setup a2billing on asterisk 1.6 , but ,when I try to access its
web page I see the a2billing directories:
Index of /a2billing
[ICO
Hey there,
I am trying to setup a2billing on asterisk 1.6 , but ,when I try to access
its web page I see the a2billing directories:Index of /a2billingNameLast
modifiedSizeDescriptionParent Directory -admin/15-Sep-2010
19:19-agent/15-Sep-2010 19:21-common/15-Sep-2010 19:18-customer/15-Sep-2010
nd password for a new customer?
>
> Thanks.
>
> --- On Thu, 6/17/10, Vahan Yerkanian wrote:
>
>> From: Vahan Yerkanian
>> Subject: Re: [asterisk-users] a2billing for residential voip usage
>> To: asterisk-users@lists.digium.com
>> Date: Thursday, June 17, 2
into the mysql table how can I espcify the
account number and/or cc number and password for a new customer?
Thanks.
--- On Thu, 6/17/10, Vahan Yerkanian wrote:
> From: Vahan Yerkanian
> Subject: Re: [asterisk-users] a2billing for residential voip usage
> To: asterisk-users@lists.di
On 6/17/10 12:49 AM, Steve Edwards wrote:
> On Wed, 16 Jun 2010, Landy Landy wrote:
>
>
>> I'm unable to place any calls through a2billing. I followed instructions
>> here: http://trac.asterisk2billing.org/cgi-bin/trac.cgi/wiki/F.A.Q to
>> DISABLE "PIN number request" Prompt for some users but,
On Wed, 16 Jun 2010, Landy Landy wrote:
> I'm unable to place any calls through a2billing. I followed instructions
> here: http://trac.asterisk2billing.org/cgi-bin/trac.cgi/wiki/F.A.Q to
> DISABLE "PIN number request" Prompt for some users but, I'm not able to
> place any calls.
>
> I created a
AGI Script a2billing.php completed, returning -1
I can't debug it or anything I'm stuck please help.
--- On Tue, 6/15/10, Faisal Hanif wrote:
> From: Faisal Hanif
> Subject: Re: [asterisk-users] a2billing for residential voip usage
> To: "'Asterisk Users Mailing Lis
It was already done.
My problem now is that I cant' place any calls through a2billing.
--- On Tue, 6/15/10, Faisal Hanif wrote:
> From: Faisal Hanif
> Subject: Re: [asterisk-users] a2billing for residential voip usage
> To: "'Asterisk Users Mailing List - N
Of Landy Landy
Sent: Tuesday, June 15, 2010 9:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] a2billing for residential voip usage
I copied the config to the a2billing.conf in /etc/asterisk folder. I'm still
not able to place any calls yet. Looks
From: Vardan Harutyunyan
> Subject: Re: [asterisk-users] a2billing for residential voip usage
> To: asterisk-users@lists.digium.com
> Date: Tuesday, June 15, 2010, 8:03 AM
> look manual, but in any case the
> a2billing.conf is in /etc/asterisk/ on
> can say, where you have place your
+Areski+GUI
>
> Jimmy
>
>
>> -Original Message-
>> From: landysacco...@yahoo.com
>> Sent: Tue, 15 Jun 2010 00:11:51 -0700 (PDT)
>> To: asterisk-users@lists.digium.com
>> Subject: Re: [asterisk-users] a2billing for residential voip usage
>>
>&
DT)
> To: asterisk-users@lists.digium.com
> Subject: Re: [asterisk-users] a2billing for residential voip usage
>
> Ram.
> Thanks for replying. I have searched / googled about it but can't find a
> solution to monitor the 4 extensions I have at home. A2billing asks for
>
And also, what a2b version you are use?
If you are use 1.7 then all config is in DB, if 1.3(4) all config in
a2billing.conf
--
Vardan Harutyunyan,
Senior System Administrator
Enterprise Incubator Foundation
123 Hovsep Emin Street,
Yerevan 0051, Republic of Armenia
Tel: + 374 10 219735
Fax: +
o dial but, I don't need that. I would like the
> extensions to dial out normally and a2billing just record the time and
> talked time for later review.
>
> Thanks.
>
> --- On *Tue, 6/15/10, ram //* wrote:
>
>
> From: ram
> Subject: Re: [asterisk-users]
and talked time for later
review.
Thanks.
--- On Tue, 6/15/10, ram wrote:
From: ram
Subject: Re: [asterisk-users] a2billing for residential voip usage
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
Date: Tuesday, June 15, 2010, 1:05 AM
you see lot of documentation o
you see lot of documentation on wiki
Google them many success case you see
Ram
On Tue, Jun 15, 2010 at 7:01 AM, Landy Landy wrote:
> Hello List.
>
> I just installed a2billing with asterisk 1.6 and got it working. The only
> problem is that I'm trying to setup something to manage who's using th
Hello List.
I just installed a2billing with asterisk 1.6 and got it working. The only
problem is that I'm trying to setup something to manage who's using the most
minutes in the house. I noticed a2billing only works for callin cards setups,
or maybe I didn't configure it correctly for what I wa
7 562 2308
> Date: Tue, 18 May 2010 20:47:12 -0700
> From: toqee...@gmail.com
> To: asterisk-users@lists.digium.com
> Subject: [asterisk-users] a2billing DID and Queues
>
> Hi all,
>
> I have configured asterisk and a2billing.for i
Hello
I think you can do this using Local Channel
for example I have do so:
queues.conf
[MyQueue]
musicclass = default
ringinuse = yes
strategy=leastrecent
joinempty = yes
timeout=60
retry=5
weight=0
wrapuptime=1
maxlen = 0
announce-frequency = 10
announce-holdtime = no
periodic-announce = knereq_b
Hi all,
I have configured asterisk and a2billing.for inbound i have also configured
did and its forwarded to sip extensions.
But i want to enable queues with inbound numbers(DID).But i could not find a
way to do this in a2billing.
I want enable that if some did comes to asterisk/a2billing it s
ion number twice???
>
> Saludos,
> Juan E. Rodríguez
>
>
> -Original Message-
> From: Nathanial Allan
> Date: Tue, 30 Mar 2010 13:08:24
> To:
> Subject: [asterisk-users] a2billing wont pass the number
>
> I am running into an issue with A2Billing. I will explain
4
To:
Subject: [asterisk-users] a2billing wont pass the number
I am running into an issue with A2Billing. I will explain first of all that
everything else works! the system is 90% complete its just this one small
problem I am running into.
So my problem is that when I place a call,
1. I dial my num
I am running into an issue with A2Billing. I will explain first of all that
everything else works! the system is 90% complete its just this one small
problem I am running into.
So my problem is that when I place a call,
1. I dial my number that I want and A2Billing gets activated
2. it asks
essage-
> From: asterisk-users-boun...@lists.digium.com
> [mailto:asterisk-users-boun...@lists.digium.com]
> On Behalf Of bilal ghayyad
> Sent: 2010 m. vasario 7 d. 01:20
> To: asterisk-users@lists.digium.com
> Subject: [asterisk-users] A2Billing and other prepaid
> Billing like ASTCC,
&g
and Routing Solutions
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bilal ghayyad
Sent: 2010 m. vasario 7 d. 01:20
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] A2Billing and other prepaid
Why not pay for missing feature and contribute them to the project.
It's a very good product.
On 06/02/2010, bilal ghayyad wrote:
> Hi All;
>
> I used A2Billing, basically it is nice and fine, but management
> possibilities is not that rich, so a lot of staff are need to be repeated
> that let t
Hi All;
I used A2Billing, basically it is nice and fine, but management possibilities
is not that rich, so a lot of staff are need to be repeated that let the admin
facing a problem of the needed time to do the task.
Anyone advise for another open source prepaid billing that is rich by the
man
Hi!
I am posting a2billing issue here in asterisk list because some one might have
faced same issue with a2billing callback. My Callback problem has been already
posted on a2billing forum which I am facing on my system. Please have a look on
this thread:
http://forum.asterisk2billing.org/viewt
ect: [asterisk-users] a2billing
hi
My a2billing adds "|HrL" automatically to dial string,
I can not find the source of this task,
I need to remove "r" from all dial strings,
Thanks for your help.
Best
Mani
__
Do You Yahoo!?
Tired of
Pezhman Lali wrote:
hi
My a2billing adds "|HrL" automatically to dial string,
I can not find the source of this task,
I need to remove "r" from all dial strings,
Thanks for your help.
Best
Mani
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the
hi
My a2billing adds "|HrL" automatically to dial string,
I can not find the source of this task,
I need to remove "r" from all dial strings,
Thanks for your help.
Best
Mani
__
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection a
Khaled wrote:
Dear
How can I customize a2billing to have two groups
One have service to play its balance and the second group do not play
the balance.
This is not the a2billing support forum.
Jeremy McNamara
___
--Bandwidth and Colocation
Dear
How can I customize a2billing to have two groups
One have service to play its balance and the second
group do not play the balance.
Regards
*
No employee or agent is authorized to conclude any binding agreement on behalf of
Dear
How can I customize a2billing to have two groups
One have service to play its balance and the second group
do not play the balance.
Regards
*
No employee or agent is authorized to conclude any binding agreement on behalf of Xp
Caros,
I installed the A2Billing - v1.2.2 with Asterisk 1.2.10. All works ok, but when
I try callout got a message saying the number in not available.
Can you help with a step-by-step to make a card autenticate and dial a number?
Thank you
Luc Moreira
Mais VoIP
-- Accepting AUTHENTICATED
Hi,you check your a2billing.conf file:; Please enter here the file you want to play when we prompt the calling party to enter his destination number; file_conf_enter_destination = prepaid-enter-number-u-calling-1-or-011
file_conf_enter_destination = prepaid-enter-destI think this file should help y
I am using a2billing as billing system on tixbox but I have
a problem since the user call the destination number ,the ivr tell him about
him amount and ask him to enter the destination number ,my question is how can
I let the user call the destination directly .
Regards
Regards!
During the use of areski a2billing software
I'm getting same problem all the time.
Actually, after 15 minutes of speaking
to someone over calling card, connection brakes.
Installation was as smooth as it could be
so I don't think I made same kind of a mess in that domain. Thi
Hello list,
Is there any way to use a2billing without the IVR for the sip/iax users. (authentication is done by the user id and pass as user registers with asterisk).
I want to dial the destination number to the asterisk. for example:
user dials,
exten =>_011.,1,DeadAGI(a2billing)
system
Thanks for this information!
Lan
- Original Message -
From:
ram
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Friday, December 16, 2005 8:50
PM
Subject: Re: [Asterisk-Users] A2billing
Trunk
Hi
check this URL will help you
>
> Excuse me Chris!
>
> Forgive me that I don't understand what you are really mean?
>
> I would very appreciated if you let me know some think about the
rules,
> and
> how we would get help from people and how to find some previous
> information
> that has been posted from someelse before that
Lan wrote:
Forgive me that I don't understand what you are really mean?
He means that this is the list for Asterisk Support - [EMAIL PROTECTED] is a
completely different product. (Asterisk is simply the PBX software,
where as [EMAIL PROTECTED] is a complete distro that just happens to include
iscussion"
Sent: Friday, December 16, 2005 4:54 PM
Subject: Re: [Asterisk-Users] A2billing Trunk
On 12/16/05, MapsAir <[EMAIL PROTECTED]> wrote:
Dear helpers and supporters!
I have been playing with the A2billing for a week, but I still get stuck
on
creating a working trunk to terminate
Hi
check this URL will help you for this
since this list only asterisk.. not [EMAIL PROTECTED]
http://sourceforge.net/forum/forum.php?thread_id=1398290&forum_id=420324
ram
On 12/17/05, snacktime <[EMAIL PROTECTED]> wrote:
On 12/16/05, MapsAir <[EMAIL PROTECTED]> wrote:> Dear helpers and sup
On 12/16/05, MapsAir <[EMAIL PROTECTED]> wrote:
> Dear helpers and supporters!
>
> I have been playing with the A2billing for a week, but I still get stuck on
> creating a working trunk to terminate the call. Is any one show me how to
> setup a trunk in A2billing or pointing me to some where that
Dear helpers and supporters!
I have been playing with the A2billing for a week, but I still get stuck on
creating a working trunk to terminate the call. Is any one show me how to
setup a trunk in A2billing or pointing me to some where that I can find out
the information.
I would very apprec
Anyone know how to do it?
Sam
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
I have setup a2billing to be used as more
of a billing software.
I have made a card for each of my
customers and the call through and get authenticated with callerID and then the
call is placed using dnid.
This is working great.
The problem that I just ralized is that
when I get a call a
:
This is so simple, you are going to kick yourself. Type "agi debug" inthe console.Thanks,Steve> -Original Message-> From: Danish Samad [mailto:
[EMAIL PROTECTED]]> Sent: Monday, November 28, 2005 3:52 AM> To: asterisk-users@lists.digium.com> Subject: [Aste
This is so simple, you are going to kick yourself. Type "agi debug" in
the console.
Thanks,
Steve
> -Original Message-
> From: Danish Samad [mailto:[EMAIL PROTECTED]
> Sent: Monday, November 28, 2005 3:52 AM
> To: asterisk-users@lists.digium.com
> Subject: [
HI,
I have been playing around with the A2billing agi for a few days( I
really think its a great application) and trying to understand its
working. As far as I have understood, the only debugging mechanism is
going through the logs it generates.
It would be really cool if I can run the agi i
HI,
I have been playing around with the A2billing agi for a few days( I
really think its a great application) and trying to understand its
working. As far as I have understood, the only debugging mechanism is
going through the logs it generates.
It would be really cool if I can run the agi in d
Please move _all_ discussion regarding A2Billing (and the mechanics of
using any billing system unless the discussion is explicitly
Asterisk-related) to some other mailing list; this mailing list not a
support forum for add-on packages.
Thanks!
___
-
yes! it works very well now, I used this to re-compile php with pcntl:
./configure --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql
--with-mysql-sock=/tmp --with-pgsql=/usr/local/pgsql/ --with-zlib
--with-gd --enable-pcntl
thank you again Vahan
rafael
On 11/19/05, Vahan Yerkanian <[EMAIL PR
ay, November 19, 2005 1:21 PM
Subject: Re: [Asterisk-Users] A2billing warnings with new Asterisk 1.2
Om the subject of A2Billing, the only problem I have is caller ID.
1. I need to add the same caller id to more than 1 card.
2. It dosnt send out the assigned caller id.
When i make a call thr
Om the subject of A2Billing, the only problem I have is caller ID.
1. I need to add the same caller id to more than 1 card.
2. It dosnt send out the assigned caller id.
When i make a call through my * box without using CC, caller ID works fine.
Any suggestions?
thanks
john
On Sat, 19 Nov
Rafael R. GV wrote:
Hi
I have this 3 warnings running a2billling with asterisk new version:
a2billing.php|2:
-- AGI Script Executing Application: (SetLanguage) Options: (en)
Nov 18 12:06:19 WARNING[17440]: pbx.c:5435 pbx_builtin_setlanguage:
SetLanguage is deprecated, please use Set(LANGU
Hi
I have this 3 warnings running a2billling with asterisk new version:
a2billing.php|2:
-- AGI Script Executing Application: (SetLanguage) Options: (en)
Nov 18 12:06:19 WARNING[17440]: pbx.c:5435 pbx_builtin_setlanguage:
SetLanguage is deprecated, please use Set(LANGUAGE()=language) instea
On 11/16/05, Rafael R. GV <[EMAIL PROTECTED]> wrote:
> issue related to cdr´s: I can see cdr records in 'call' table from mysql
> console but they don't appear in a2bill web interface, I only can see
> records of current date ...not sure if its a mysql 4.x incompatibility> so now I´ve installed po
> issue related to cdr´s: I can see cdr records in 'call' table from mysql> console but they don't appear in a2bill web interface, I only can see
> records of current date ...not sure if its a mysql 4.x incompatibility> so now I´ve installed postgres to verify, let me now if someone has same> prob
On Tue, 2005-11-15 at 19:01 -0500, Cory Andrews wrote:
> Rafael - To generate PDF documents, you may need to install Adobe PDF
> Writer, or the full version of Acrobat that includes the reader and
> writer. Just a guess.
Wouldnt an open source solution that is basically just libraries work
bett
Rafael - To generate PDF documents, you may need to install Adobe PDF
Writer, or the full version of Acrobat that includes the reader and
writer. Just a guess.
Cory Andrews
Senior Partner
+++
VOIPSupply.com
454 Sonwil Drive
Buffalo, NY 14225
+++
voice - 716.630.1555 X22
email -
Rafael R. GV wrote:
Hello
1.- I am testing a2billing in a SER-Asterisk implementation but using
Mysql versions 4.1.15 and 5.0.15 because I want to integrate its cdr
with some tables from Ser database, the a2billing-mysql-schema does not
work properly in mysql-5 and in 4.1.15 works well but no
Hello
1.- I am testing a2billing in a SER-Asterisk implementation but using
Mysql versions 4.1.15 and 5.0.15 because I want to integrate its cdr
with some tables from Ser database, the a2billing-mysql-schema does not
work properly in mysql-5 and in 4.1.15 works well but now I found this
issue rela
figured it out. thanks anyway.
the first dload had stopped at 12 percent. second dload was named
Open_A2Billing_version_Raccoon.tar.gz.1
ran the command
tar -xzvf Open_A2Billing_version_Raccoon.tar.gz.1
everything good now at least up to this point.
hope this helps the other non linux people out
Thank you for the reply. I downloaded again and ran the command
tar -xzvf Open_A2Billing_version_Raccoon.tar.gz
but still getting the same error. may I ask the url you used for the
download please?
thank you
john fraser
asterisk:/usr/src/a2billing# wget
http://www.areski.net/a2billing/Open_A
John Fraser wrote:
does anybody know what i am doing wrong? help please
gzip: stdin: unexpected end of file
tar: Read 8572 bytes from Open_A2Billing_version_Raccoon.tar.gz
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
asterisk:/usr/src/a
does anybody know what i am doing wrong? help please
gzip: stdin: unexpected end of file
tar: Read 8572 bytes from Open_A2Billing_version_Raccoon.tar.gz
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
asterisk:/usr/src/a2billing#
thanks
jo
Rafael R. GV a écrit :
[...]
2.- Change value FG_TABLE_NAME="call t1" for FG_TABLE_NAME="calls
t1" in following files:
A2Billing_UI/Public/call-log-customers.php
A2Billing_UI/Public/invoices.php
A2BCustomer_UI/balance.php
A2BCustomer_UI/invoices.php
You forgot:
A2Billing_UI/Public/aster
Rafael R. GV wrote:
PS: mysql-schema does not work properly in mysql 5.0.x because only one
timestamp with default now() in a table its allowed as you told me and
also I´ve found other issue related to auto_increment value:
ERROR 1064 (42000) at line 87: You have an error in your SQL syntax;
Thank you
this is what I made to solve it:
1.- create table 'calls' using: " starttime TIMESTAMP DEFAULT
now() NOT NULL, " (it can be "starttime TIMESTAMP DEFAULT
CURRENT_TIMESTAMP NOT NULL," too) :
CREATE TABLE calls (
id BIGINT NOT NULL AUTO_INCREMENT,
sessionid CHAR(40) NOT NULL,
Rafael R. GV wrote:
thanks Vahan
you are right, I have changed 'call t1' for 'calls t1' in balance.php
and invoices.php files and then tried to create a new table named
'calls' but mysql 5 has changed syntax for 'TIMESTAMP DEFAULT' and this
is the error:
-> starttime TIMESTAMP DEFA
thanks Vahan
you are right, I have changed 'call t1' for 'calls t1' in balance.php
and invoices.php files and then tried to create a new table named
'calls' but mysql 5 has changed syntax for 'TIMESTAMP DEFAULT' and this
is the error:
mysql> CREATE TABLE calls (
-> id BIGINT NOT NULL AUTO_
Rafael R. GV wrote:
Hi
I was using a2billing with mysql-4.1.12 and php-5.0.4 very successfully
(thanks to areski for this great project and its invaluable assistance
to solve some issues in my last installation...) now I´ve upgraded mysql
to last release 5.0.15 and, without changes in 'mya2bil
Hi
I was using a2billing with mysql-4.1.12 and php-5.0.4 very successfully
(thanks to areski for this great project and its invaluable assistance
to solve some issues in my last installation...) now I´ve upgraded
mysql to last release 5.0.15 and, without changes in 'mya2billing'
database I am able
Aíeee Caramba, intro_prompt is really to have a customized message at
the initiation of the call. please read the comment above in the
configuration file.
Try from shell to run the script and press enter until you get back to
the shell,
then you will see perhaps if an error occur on the AGI. if yo
1 - 100 of 126 matches
Mail list logo
