hello everyone,
i am using asterisk 11.6 with asterisk-gui and i am stuck in setting up the
linksys spa3102 and the sip trunk for it.
may i have some help please?
friendly,
--
_
-- Bandwidth and Colocation Provided by
:* Saturday, 25 May 2013, 18:14
*Subject:* RE: [asterisk-users] asterisk-gui-2.1.0-rc1
snip
installed it from SVN.
When I try to execute ./configure , got the following message ,
configure: error: *** JSON support not found (this typically
means the libjansson development package is missing
On 05/25/2013 11:42 AM, luke devon wrote:
Hi Alec,
I followed that both instructions . It was not success. got the same
issue. I'm not sure the reason is the OS. I am Using CentOS 6.4.
However, following method was helped me to resolve the problem.
snip
installed it from SVN.
When I try to execute ./configure , got the following message ,
configure: error: *** JSON support not found (this typically
means the libjansson development package is missing)
After that I tried to install certain packages by,
yum groupinstall
: Saturday, 25 May 2013, 18:14
Subject: RE: [asterisk-users] asterisk-gui-2.1.0-rc1
snip
installed it from SVN.
When I try to execute ./configure , got the following message ,
configure: error: *** JSON support not found (this typically
means the libjansson development package
Hi
I have installed asterisk-gui-2.1.0-rc1 . After I logged in to the GUI , it was
continuously refreshing the web browser and trying to load the configurations.
Can I know where is gone wrong ?
Thanks in advance
Luke --
_
Hi, how did you installed it?
if it is svn, thry to install it again.
if it is through source then delete it and try through svn
Hi
I have installed asterisk-gui-2.1.0-rc1 . After I logged in to the GUI
, it was continuously refreshing the web browser and trying to load
the configurations.
Try to use firefox instead of IE. Besides, you may check if there is any
problem in the extensions.conf. My recent experiment of installing gui into
asterisk 11.x is that there is problem in some of the macro script within
extensions.conf.
I delete the sample macro scripts in extensions.conf and
To: asterisk-users@lists.digium.com
Sent: Saturday, 25 May 2013, 2:31
Subject: Re: [asterisk-users] asterisk-gui-2.1.0-rc1
Hi, how did you installed it?
if it is svn, thry to install it again.
if it is through source then delete it and try through svn
Hi
I have installed asterisk-gui-2.1.0-rc1
Hello Folks;
Perhaps I am chasing my tail here.
Before I go any further, is this compatible/supported in Asterisk 1.6x?
If so, I would be willing to post any manager.conf or http.conf snippets
needed.
When I attempt to open the Asterisk Web GUI, I get a 'page not found'.
I am sure this is
On Mon, Jun 6, 2011 at 11:55 AM, Silver Thorne szilvertho...@gmail.com wrote:
Hello Folks;
Perhaps I am chasing my tail here.
Before I go any further, is this compatible/supported in Asterisk 1.6x? If
so, I would be willing to post any manager.conf or http.conf snippets
needed.
When I
Hello,
Does Asterisk-GUI 2.0 compatible with Asterisk 1.6.1.1 ?
Sincerely,
Tseveen
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
AstriCon 2009 - October 13 - 15 Phoenix, Arizona
Register Now: http://www.astricon.net
I'm new to asterisk, but have been at Linux since 1997 .. so kind of a
newbie ..
I have a good buddy who is supposed to be helping me with this darn
install, but you all know how that works.
I have a new mid-tower, AMD 64 x2, 4 gigs of memory and spoftware
mirror. OpenSuSE 11.2 .. as I said
On Mon, Jul 06, 2009 at 11:19:49AM +0900, Tseveendorj wrote:
Hello,
I've installed Asterisk 1.4.21.2 with Asterisk-GUI on Ubuntu 9.04 but
Asterisk.
I couldn't see asterisk-GUI web interface when I accessed to
http://IPADDRESS:8088/asterisk/static/config/index.html.
But after created
Hello,
I've installed Asterisk 1.4.21.2 with Asterisk-GUI on Ubuntu 9.04 but
Asterisk.
I couldn't see asterisk-GUI web interface when I accessed to
http://IPADDRESS:8088/asterisk/static/config/index.html.
But after created symbolic link /var/lib/asterisk/static-http folder to
Hi Danny;
I found cfgbasic.html under the /var/lib/asterisk/static-http/config and did
not find cfgadvanced.html, any advise?
About the root directory: do u mean that I have to set my root directoty to be
/var/lib/asterisk/ at the httpd server? Because by default the httpd server has
another
On Fri, Jun 19, 2009 at 10:28:28AM -0700, bilal ghayyad wrote:
Hi Danny;
I found cfgbasic.html under the /var/lib/asterisk/static-http/config
and did not find cfgadvanced.html, any advise?
cfgbasic.html is now merely a redirection to index.html .
cfgadvanced.html is now gone - the advanced
On Fri, Jun 19, 2009 at 10:28:28AM -0700, bilal ghayyad wrote:
About the root directory: do u mean that I have to set my root
directoty to be /var/lib/asterisk/ at the httpd server? Because by
default the httpd server has another root directory than this, or you
are talking about another
bilal ghayyad schrieb:
what about the port 8088, from where I can set it (in case I need to change
that port to be another port)?
That would be the bindport parameter in /etc/asterisk/http.conf
I guess.
Philipp Kempgen
--
AMOOMA GmbH - Bachstr. 126 - 56566 Neuwied -
On Wed, Jun 17, 2009 at 03:35:56PM -0700, bilal ghayyad wrote:
Hi All;
asterisk-gui read/write from the conf files or database?
Asterisk-gui's database is the config files ;-)
--
Tzafrir Cohen
icq#16849755 jabber:tzafrir.co...@xorcom.com
+972-50-7952406
] On Behalf Of bilal ghayyad
Sent: Wednesday, June 17, 2009 5:36 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] asterisk-gui: read/write in the conf files or db?
Hi All;
asterisk-gui read/write from the conf files or database?
Any advise?
Regards
Bilal
] On Behalf Of bilal
ghayyad
Sent: Wednesday, June 17, 2009 5:36 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] asterisk-gui: read/write in the conf files or db?
Hi All;
asterisk-gui read/write from the conf files or database?
Any advise?
Regards
Bilal
that you would get from a
native manager session.
-Original Message-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bilal ghayyad
Sent: Wednesday, June 17, 2009 5:36 PM
To: asterisk-users@lists.digium.com
Subject: [asterisk-users
To: asterisk-users@lists.digium.com
Subject: [asterisk-users] asterisk-gui: read/write in the conf files or db?
Hi All;
asterisk-gui read/write from the conf files or database?
Any advise?
Regards
Bilal
___
-- Bandwidth and Colocation
-
From: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of bilal ghayyad
Sent: Thursday, June 18, 2009 3:48 PM
To: asterisk-users@lists.digium.com
Subject: Re: [asterisk-users] asterisk-gui: read/write in the conf files
ordb
I am not able
On Thu, Jun 18, 2009 at 11:27:18AM -0700, bilal ghayyad wrote:
Hi Danny;
Really I did not understand how I can determine if the IO will be DB or
conf files? Is it from the Asterisk manager?
Again, unless you make some pretty major changes in the way the
asterisk-gui[1] works, it will use
Hello List;
Actually based on what I read at Guru that after I did the installation and
configuration of the asterisk-gui, I can access it using the link:
http://id_address:8088/asterisk/static/config/cfgadvanced.html
I tried to search for something like
Hi All;
asterisk-gui read/write from the conf files or database?
Any advise?
Regards
Bilal
___
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
I was playing with 1.6.0.1 and the latest gui and wondered how my sip
did was registered after creating it? How does this take place, normally
I made a register = command in sip.conf but don't see this in any files?
Thanks!
jlc
___
-- Bandwidth and
, November 15, 2008 4:18:25 PM GMT -06:00 Central America
Subject: [asterisk-users] Asterisk GUI and SIP registration
I was playing with 1.6.0.1 and the latest gui and wondered how my sip
did was registered after creating it? How does this take place, normally
I made a register = command in sip.conf
Hi,
I use asterisk branch 1.4 and gui 1.4 as well.
I have the following situation:
When I try to make gui configuration by
http://localhost:8088/asterisk/static/config/setup/install.html
I can see that application logs my user correctly but there is no
browser window shift to the next page. it
A COMPLETE shot in the dark, but:
Tomasz Zieleniewski wrote:
[Feb 4 09:33:09] == Parsing
'/home/asterisk/asterisk/1.4/pbx/etc/asterisk/manager.conf': [Feb 4
09:33:09] Found
If this is where you've got everything installed, i.e. with a base of
/home/asterisk/asterisk/1.4/pbx/, maybe:
bkruse wrote:
Is this with the latest version of the gui?
(branches/asterisknow)
(http://asteriskNOW.org/install-related)
Tell me what revision, and paste the context of the user entry thats
having a problem.
-bk
Will Tatam wrote:
Has anyone tested disabling call waiting for a
Has anyone tested disabling call waiting for a SIP extension via the GUI ?
I have deselected call waiting for a user with a SNOM 360 and applied my
changes but they still get calls waiting and are reporting that 80% of
the time when they get the bleeping in their ear when the new call comes
in
Hi Steve,
you are totally right, but my question is because a saw that gui into SVN
and not yet released, but at the same time used into AsteriskNOW.
Was just a question...
;o)
Thanks
2007/10/12, Steve Totaro [EMAIL PROTECTED]:
FaberK wrote:
Hi to all,
I've just started to see that
If you read between my lines, my guess is it won't be released unless
the community takes it out of Digium's hands and forks it.
Thanks,
Steve
FaberK wrote:
Hi Steve,
you are totally right, but my question is because a saw that gui into
SVN and not yet released, but at the same time used
On Friday 12 October 2007 10:45:52 Steve Totaro wrote:
FaberK wrote:
I've just started to see that Asterisk-gui from Digium.
Does anybody know, when the first official-realese will be released?
I may be totally wrong but at Astricon, during the What's New at
Digium (SwitchVox purchase) I
Hi to all,
I've just started to see that Asterisk-gui from Digium.
Does anybody know, when the first official-realese will be released?
Thanks to all
--
.:FaberK:.
___
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-users
FaberK wrote:
Hi to all,
I've just started to see that Asterisk-gui from Digium.
Does anybody know, when the first official-realese will be released?
Thanks to all
--
.:FaberK:.
I may be totally wrong but at Astricon, during the What's New at
Digium (SwitchVox purchase) I asked the
In Paul's defense, it looked to me like his original post was simply
a joke that was misunderstood. (I thought it was funny, anyway)
I have written a few jokes for this list over the years - it's nice to
know that some people find them funny.
PaulH
verbose
responses)
PIN 4cc364db (as of March 24, 2007)
- Original Message -
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com asterisk-users@lists.digium.com
Sent: Thu Jun 21 12:48:45 2007
Subject: Re: [asterisk-users] Asterisk GUI
On Jun 20, 2007, at 5:04 PM
On Fri, Jun 22, 2007 at 08:06:39AM -0400, Dave Bour wrote:
So I'll ask the question. What's wrong with top posting. I use a
blackberry to read most of my email, and bottom posting means excessive
scrolling, often waiting to download additional content resulting in
higher usage
: [EMAIL PROTECTED] [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com asterisk-users@lists.digium.com
Sent: Thu Jun 21 12:48:45 2007
Subject: Re: [asterisk-users] Asterisk GUI
Four lines of headers (the bad headers quoting style) that actually
leave out the name of the poster.
On Jun 20, 2007
Dave Bour wrote:
So I'll ask the question. What's wrong with top posting.
WOW! Is this a mine field, or what?
You have stumbled into one of the hot religious arguments on just about
all lists.
There will NEVER be an agreement on which is acceptable.
Many anchored in the past hotly content
John Novack wrote:
Dave Bour wrote:
So I'll ask the question. What's wrong with top posting.
WOW! Is this a mine field, or what?
You have stumbled into one of the hot religious arguments on just about
all lists.
There will NEVER be an agreement on which is acceptable.
Many
For example, a user could post a message to the list asking I'm new
to Linux and Asterisk. Should edit my dialplan by hand, use FreePBX,
or buy a commercial solution? Imagine the response as you tried to
convince them to buy PBXWare, FreePBX users try to convince them that
they
Troy Ayers wrote:
I would have been convinced if you had not top-posted! heh
Rob Schall wrote:
Tom,
I disagree with your argument for a number of reasons. Each of these
reasons should be more than enough to convince you I'm correct and
you should do it my way and only my way.
And
On Jun 20, 2007, at 5:04 PM, Troy Ayers wrote:
I would have been convinced if you had not top-posted! heh
Rob Schall wrote:
Tom,
I disagree with your argument for a number of reasons. Each of these
reasons should be more than enough to convince you I'm correct and
you
should do it my
Hi List;
My Question was:
From where I can download the Asterisk GUI, a lot of
replies we received but I did not receive from where I
download it and how I compile it.
Regards
Bilal
Get the Yahoo!
http://www.tuxtone.com/index.php/VOIP:Asterisk_Install_Script
On 6/20/07, bilal ghayyad [EMAIL PROTECTED] wrote:
Hi List;
My Question was:
From where I can download the Asterisk GUI, a lot of
replies we received but I did not receive from where I
download it and how I compile it.
On Wed, Jun 20, 2007 at 04:25:44AM -0700, bilal ghayyad wrote:
Hi List;
My Question was:
From where I can download the Asterisk GUI, a lot of
replies we received but I did not receive from where I
download it and how I compile it.
svn co http://svn.digium.com/svn/asterisk-gui/trunk
On Jun 19, 2007, at 12:37 PM, Senad Jordanovic wrote:
Tom Rymes wrote:
[snip]
How many times does it have to be said? Don't feed the trolls!
Tom
Tom...Who in your opinion is a troll?
Senad
Well, technically, I was calling the original post a troll, not the
original poster. More
Tom,
I disagree with your argument for a number of reasons. Each of these
reasons should be more than enough to convince you I'm correct and you
should do it my way and only my way.
And for the record, VI and CLI.
Rob
Tom Rymes wrote:
On Jun 19, 2007, at 12:37 PM, Senad Jordanovic wrote:
I would have been convinced if you had not top-posted! heh
Rob Schall wrote:
Tom,
I disagree with your argument for a number of reasons. Each of these
reasons should be more than enough to convince you I'm correct and you
should do it my way and only my way.
And for the record, VI and
On Jun 16, 2007, at 4:37 PM, Tzafrir Cohen wrote:
On Sat, Jun 16, 2007 at 08:55:24PM +0100, Senad Jordanovic wrote:
Brett Crapser wrote:
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad! CLI good!
PaulH
Really...?
So explain why every major PBX
Tom Rymes wrote:
On Jun 16, 2007, at 4:37 PM, Tzafrir Cohen wrote:
On Sat, Jun 16, 2007 at 08:55:24PM +0100, Senad Jordanovic wrote:
Brett Crapser wrote:
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad! CLI good!
PaulH
Really...?
So explain why
Tzafrir Cohen wrote:
On Sat, Jun 16, 2007 at 08:55:24PM +0100, Senad Jordanovic wrote:
Brett Crapser wrote:
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad! CLI good!
PaulH
Really...?
So explain why every major PBX manufacturer has GUI of some
On Sun, Jun 17, 2007 at 08:22:23AM +0100, Senad Jordanovic wrote:
Tzafrir Cohen wrote:
On Sat, Jun 16, 2007 at 08:55:24PM +0100, Senad Jordanovic wrote:
Brett Crapser wrote:
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad! CLI good!
PaulH
On Sat, 2007-06-16 at 17:10 -0400, Dean Collins wrote:
Brett,
The demand for asterisk GUI's could be that the world primarily consists
of four year olds (as you put it - I call them customers) and not
geeks with pocket protectors and Vi skills to tame all tasks.
When you realize that IP
GUI bad! CLI good!
PaulH
On Thu, 2007-06-14 at 11:40 -0700, bilal ghayyad wrote:
Hi List;
Where I can download Asterisk GUI and what I can have
benifit from it?
Regards
Bilal
Be a better
Paul Hales wrote:
GUI bad! CLI good!
PaulH
Really...?
So explain why every major PBX manufacturer has GUI of some sort?
Surely they would have had CLI only if GUI is bad!!!
Senad
www.bicomsystems.com
___
--Bandwidth and Colocation provided
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad! CLI good!
PaulH
Really...?
So explain why every major PBX manufacturer has GUI of some sort?
Surely they would have had CLI only if GUI is bad!!!
Senad
Senad - it is really to cover the inability
Brett Crapser wrote:
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad! CLI good!
PaulH
Really...?
So explain why every major PBX manufacturer has GUI of some sort?
Surely they would have had CLI only if GUI is bad!!!
Senad
Senad - it is
On Sat, Jun 16, 2007 at 08:55:24PM +0100, Senad Jordanovic wrote:
Brett Crapser wrote:
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad! CLI good!
PaulH
Really...?
So explain why every major PBX manufacturer has GUI of some sort?
Surely
] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Brett Crapser
Sent: Saturday, 16 June 2007 11:07 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Asterisk GUI
On Saturday 16 June 2007 02:24 am, Senad Jordanovic wrote:
Paul Hales wrote:
GUI bad
Hi List;
Where I can download Asterisk GUI and what I can have
benifit from it?
Regards
Bilal
Be a better Globetrotter. Get better travel answers from someone who knows.
Yahoo! Answers - Check it out.
On 6/14/07, bilal ghayyad [EMAIL PROTECTED] wrote:
Hi List;
Where I can download Asterisk GUI and what I can have
benifit from it?
Whaddya know - there's a whole page on the wiki dedicated to such things:
http://www.voip-info.org/wiki-Asterisk+GUI
;-)
I'm a CLI-only guy myself, so I can't
Voip-info has some different links to packages out there for a gui based
asterisk. In my experience, I've found it much easier to tweak a
dialplan and user accounts by hand. We are using realtime/mysql for all
our voicemail/sip/extensions, and I have a small gui I made that creates
those initial
I installed the asterisk GUI, Asterisk web manager, it loads fine, but if
I go to the AGI section, I get a permission denied
Obviously apache cannot access the /etc/asterisk directory.
I added apache as group, but still the same problem.
Suggestion any one?
is there a good and free asterisk gui that is not tight to a live cd?
I like [EMAIL PROTECTED] but it looks like I need to install the livecd. I
just want to run asterisk on my debian install. Is there a way to run
[EMAIL PROTECTED] on debian? or anything similar?
thanx in advance
Pat
Patrick Aljord wrote:
is there a good and free asterisk gui that is not tight to a live cd?
I like [EMAIL PROTECTED] but it looks like I need to install the livecd. I
just want to run asterisk on my debian install. Is there a way to run
[EMAIL PROTECTED] on debian? or anything similar?
You
Hi guys,
i need to know if there is any gui application out there for asterisk
which provides a live report of calls, channels, agents, conferences
etc?-- RegardsRizwan HishamSoftware Engineer
___
--Bandwidth and Colocation provided by Easynews.com --
Check out Flash Operator Panel, gives a pretty interface for watching
parked calls, agents, etc...
On 8/11/06, Rizwan Hisham [EMAIL PROTECTED] wrote:
Hi guys,
i need to know if there is any gui application out there for asterisk which
provides a live report of calls, channels, agents,
Hello friends, does anyone know if there is a gui for asterisk provided with
the asterisk source or has to downloaded from somewhere else.
With warm regards.
Vivek J. Joshi.
[EMAIL PROTECTED]
Trikon electronics Pvt. Ltd.
All science is either physics or stamp collecting.
try www.trixbox.orgasterisk source does not come with any GUIOn 8/1/06,
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Hello friends, does anyone know if there is a gui for asterisk provided with the asterisk source or has to downloaded from somewhere else.With warm regards.Vivek J. Joshi.
[EMAIL
Trixbox is not a GUI, it's a package that includes the OS, Asterisk, a GUI, etc. FreePBX is the GUI included in Trixbox.AlexOn 8/1/06, Rajeev Natarajan
[EMAIL PROTECTED] wrote:
try www.trixbox.orgasterisk source does not come with any GUI
On 8/1/06,
[EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
true - i was meaning to say that it has a gui 'bundled' with it... (not to mention phpmyadmin, AGI to connect to high-level
application development tools such as PHP and Perl, integrated voicemail and fax-to-email support, contact
management, calling card billing and management software.
Well that made it sound like a much better system than I did ;-)AlexOn 8/1/06, Rajeev Natarajan [EMAIL PROTECTED]
wrote:true - i was meaning to say that it has a gui 'bundled' with it... (not to mention phpmyadmin, AGI to connect to high-level
application development tools such as PHP and Perl,
Please, inform us when you finish your script.
Tomislav
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Sherwood McGowan
Sent: 28. listopad 2005 12:32
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users
Hello all,
I'm trying to find an Asterisk web interface (or windows gui interface) to
asterisk that won't allow users to go making changes to config files. I've
trawled through the very extensive list in the wiki, but there doesn't seem
to be a clear defining line between applications that are
Discussion'
-Subject: [Asterisk-Users] Asterisk GUI/web interfaces that
-don't changeconfig files
-
-Hello all,
-
-I'm trying to find an Asterisk web interface (or windows gui
-interface) to asterisk that won't allow users to go making
-changes to config files. I've trawled through the very
-extensive
Stay tuned for PhoneCALL's 2.7-RC1 release scheduled soon. We're adding
a new Security Manager that allows you to set the levels of editing for
your users/admins.
Chris Bagnall wrote:
Hello all,
I'm trying to find an Asterisk web interface (or windows gui interface) to
asterisk that won't
On 10/28/05, Dustin Wildes [EMAIL PROTECTED] wrote:
Stay tuned for PhoneCALL's 2.7-RC1 release scheduled soon. We're adding
a new Security Manager that allows you to set the levels of editing for
your users/admins.
Chris Bagnall wrote:
Hello all,
I'm trying to find an Asterisk web
search for [EMAIL PROTECTED] It works well and is very easy to install for
beginners like me.
Michael Felder wrote:
Can anybody recommend an Asterisk GUI to help a newbie confg ?
Kind regards
Michael Felder
IT Medic Australia Pty. Ltd.
P: 03 9557 2213
F: 03 9557 2214
M: 0419 568 217
E:
Subject: Re: [Asterisk-Users] Asterisk Gui?
Michael Felder wrote:
Can anybody recommend an Asterisk GUI to help a newbie confg ?
Try [EMAIL PROTECTED] it's a complete ISO with everything you need to start
with.
If you already have the OS installed then check out AMP which is by the
way included
]
[mailto:[EMAIL PROTECTED] On Behalf Of Ariel
Batista
Sent: Friday, 15 July 2005 11:04 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk Gui?
Michael Felder wrote:
Can anybody recommend an Asterisk GUI to help a newbie confg ?
Try [EMAIL
On Fri, Jul 15, 2005 at 10:14:39AM -0400, Ariel Batista wrote:
Michael Felder wrote:
Is [EMAIL PROTECTED] as functional as full blow Asterisk.
I am using this for my business.
Yes I feel that the actually name should be [EMAIL PROTECTED] or SOHO.
Originally it was intended to integrate
Can anybody recommend an Asterisk GUI to help a newbie confg ?
Kind regards
Michael Felder
IT Medic Australia Pty. Ltd.
P: 03 9557 2213
F: 03 9557 2214
M: 0419 568 217
E: [EMAIL PROTECTED]
http://www.ITMedic.com.au
Keeping your computer systems healthy.
ure Asterisk?
Michael Felder wrote:
Can anybody recommend an Asterisk GUI to help a newbie confg ?
Try [EMAIL PROTECTED] it's a complete ISO with everything you need to start
with.
If you already have the OS installed then check out AMP which is by the way
included in [EMAIL PROTECTED]
Kind regards
Can anybody recommend an Asterisk GUI to help a newbie confg ?
If you really need a GUI that makes it simple, try [EMAIL PROTECTED] :
comes with AMP.
See http://asteriskathome.sourceforge.net/
If you only want a web-base GUI to help you edit config files, follow
instructions on this page :
This looks to be another posibility
http://www.contentmanagementsoftware.info/zope/asterisk-zTrix
Ariel Batista wrote:
Michael Felder wrote:
Can anybody recommend an Asterisk GUI to help a newbie confg ?
Try [EMAIL PROTECTED] it's a complete ISO with everything you need to start
with.
Command line as headless Linux.
W
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
pinchienSent: Tuesday, May 03, 2005 12:25 PMTo:
asterisk-users@lists.digium.comSubject: [Asterisk-Users] Asterisk
GUI
What is Asterisk GUI architecture acturally? I could not get
What is Asterisk GUI architecture acturally? I could not get
it...
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
pinchien wrote:
What is Asterisk GUI architecture acturally? I could not get it...
hmm?
check [EMAIL PROTECTED] - it contains AMP - http://asteriskathome.sf.net
Tomek
--
Startuj z INTERIA.PL! http://link.interia.pl/f186c
Hello,
I am trying to setup an Asterisk GUI with the help of astman(please visit
http://astman.sourceforge.net/am-user-guide.html).
I have installed astman and currently assessing my GUI using;
http://ipaddress-of-asteriskbox/cgi-perl/am-main.pl
I am trying to get the menu options in my GUI to
Jim Van Meggelen wrote:
Perhaps rather than a GUI we should be wanting an IDE (as in Integrated
Development Environment, not Intelligent Drive Electronics . . . bloody
overlapping acronyms . . . but I digress . . . ).
Even some basic syntax highlighting would improve the readability of
I had to give up after attempt to install AMP.. It's got very nice
user interface, that is, AFTER you have sucessfully installed it.. I
see it's got great potential, but current release is very difficult to
install, even with the newbie guide.
If you have fewer than 10 extensions to configure,
Just wondering how difficult it would be for AMP devs to develop a
install wizard or a batch file that can automatically execute the
install and download necessary dependencies... until then, I guess
I'll be continuing to manually config my asteisk files
This requirement is part of the
Sent: Wednesday, November 24, 2004 7:20 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] asterisk gui?
I had to give up after attempt to install AMP.. It's got very nice
user interface, that is, AFTER you have sucessfully installed it.. I
see it's got great
, 2004 10:20 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] asterisk gui?
I had to give up after attempt to install AMP.. It's got very nice
user interface, that is, AFTER you have sucessfully installed it.. I
see it's got great potential, but current
1 - 100 of 137 matches
Mail list logo