waitfordialtone=yes on chan_dahdi.conf is supposed to be the perfect
solution, but does it work on on UK lines?
Kelvin Chua
On Fri, Aug 26, 2011 at 4:44 PM, Kelvin Chua wrote:
> i am comparing the experience of using an analog span to a T1 for example:
> if i have a 3 quad port t1 card, with t
i am comparing the experience of using an analog span to a T1 for example:
if i have a 3 quad port t1 card, with the initial view of dahdi_tool, i can
easily tell if a line is not working
now supposed i have a system with 3 24port cards, with just watching the
main view of dahdi_tool,
i cannot do t
On Friday 26 August 2011, Kelvin Chua wrote:
> has anybody ever seen a red alarm on an fxo port (tdm400) whenever you
> unplug a pstn line? I think i saw a post on the mailing list a few years
> back about this, but never actually seen one
That's what mine (TDM410P clone with 2 * FXO + 2 * FXS)
On Fri, Aug 26, 2011 at 10:58:10AM +0800, Kelvin Chua wrote:
> I should clarify on my post, i can see a red alarm on cat /proc/dahdi/1 but
> never when using dahdi_tool
>
> in cat /proc/dahdi/1:
> Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
>
>1 WCTDM/4/0 FXSKS (In use) RED(SW
I should clarify on my post, i can see a red alarm on cat /proc/dahdi/1 but
never when using dahdi_tool
in cat /proc/dahdi/1:
Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
1 WCTDM/4/0 FXSKS (In use) RED(SWEC: OSLEC)
2 WCTDM/4/1 FXSKS (In use) RED(SWEC: OSLEC)
3 WCTDM/4/2 FX
On Fri, Aug 26, 2011 at 08:51:56AM +0800, Kelvin Chua wrote:
> has anybody ever seen a red alarm on an fxo port (tdm400) whenever you
> unplug a pstn line? I think i saw a post on the mailing list a few years
> back about this, but never actually seen one
I've not personally tested this, but I did
has anybody ever seen a red alarm on an fxo port (tdm400) whenever you
unplug a pstn line? I think i saw a post on the mailing list a few years
back about this, but never actually seen one
--
_
-- Bandwidth and Colocation Provided