Dear;
Thanks a lot for guiding me.
Is it possible that the installation libpri-1.4.11.5 newer than the
libpri-1.4.11.5-patch?
Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for
the libpri-1.4.11.5):
libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch
It gave me that
Its probably not a bug so don't apply this patch. No D-Channel means
it cant sync up. It could be related to anything but the least likely
is that its a bug in libpri or dahdi.
Just go thru your configs, check and double check the cabling.
On Tue, Jun 14, 2011 at 7:27 PM, bilal ghayyad wrote:
>
Dears;
I patched libpri-1.4.11.5 using the command:
patch -p0 -R -i libpri-1.4.11.5-patch and then I did make and make install,
also I did same for dahdi and asterisk (ofcourse i did for asterisk
./configure).
Still the problem regarding the pri is existed, and kindly below is a snap shot
of
> Is it possible that the installation libpri-1.4.11.5 newer than the
> libpri-1.4.11.5-patch?
>
> Well, when I typed (note: I am trying to apply the
> libpri-1.4.11.5-patch for the libpri-1.4.11.5):
>
> libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch
>
> It gave me that patched detected as
Dears;
The problem was related to something else.
The Digium card has two PRI ports, actually to get it UP, I have to configure
the two ports and both of those two ports to take the timing from span 1.
Why this, I do not know ! Although I am using only one E1 connected to span 1,
so why I hav
What company card you have? Copy paste your dahdi config and
chan_dahdi.conf
--
Sent from my iPhone
On Jun 15, 2011, at 6:53 AM, bilal ghayyad wrote:
Dears;
The problem was related to something else.
The Digium card has two PRI ports, actually to get it UP, I have to
configure the two p
The card is Digium card T2XXP (PCI) as I mentioned in my email.
I added the configuration for the second port (span 2) to work, otherwise it
does not work.
I just added the below lines in the files system.conf and chan_dahdi.conf, all
other lines are the default lines. The asterisk version is:
