[Asterisk-Users] Hangup Issues on TDM40B FXO Australia
Hi,
I have 2 Asterisk servers in .pg and 2 in .au
In .pg I have had to configure them as if they were in .au and use LS
signaling.
I am using the latest Asterisk @ Home (1.0) and it is working well with
1 TDM400P for interfacing with the
on-Commercial Discussion'
Subject: RE: [Asterisk-Users] Hangup Issues on TDM40B FXO Australia
Hi,
I have 2 Asterisk servers in .pg and 2 in .au
In .pg I have had to configure them as if they were in .au and use LS
signaling.
I am using the latest Asterisk @ Home (1.0) and it is working well
I had a similar issue both with the X100P clones and TDM400.
Both were fixed by enabling AU zone and the busydetect functions. Don't
forget a full asterisk reload needs to take place after changing Zap conf
files, not just a soft-reload. Best way is to reboot the computer.
Mike
> I have a simila
Hi,
I have 2 Asterisk servers in .pg and 2 in .au
In .pg I have had to configure them as if they were in .au and use LS
signaling.
I am using the latest Asterisk @ Home (1.0) and it is working well with 1
TDM400P for interfacing with the PSTN lines.
Previously I had exactly the problem you have
I have a similar issue.
I have 2 pstn lines and a phone plugged into my tdm400.
If I make a call to the outside using the phone, and the pstn number is
engaged, and I hang up, the line is not freed. I have been restarting
asterisk to get my external line back.
This does not happen if I make t
