: RE: [Asterisk-Users] Pri Gateway Hardware
Does TDMoE supports kernel 2.6?
Where should I do echo cancellation?
--- Carlos Alperin <[EMAIL PROTECTED]> wrote:
> Low level requeriment, just you transfer everything
> using level 2. So you
> don't need to the overhead to have Asterisk
ic.
>
> Carlos Alperin
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Jean-Michel
> Hiver
> Sent: Tuesday, January 10, 2006 1:18 PM
> To: Asterisk Users Mailing List - Non-Commercial
> Discussion
> Subject: Re: [
Jean-Michel Hiver wrote:
Alexander Lopez a écrit :
TDMoE is stable and stale, There is no more development planed or
needed as it only opens up a pipe between two ethernet points using
Layer 2.
OK... What would be in the advantage in running TDMoE rather than
using IAX or SIP?
TDMoE sho
nuary 10, 2006 1:18 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Pri Gateway Hardware
Alexander Lopez a écrit :
>TDMoE is stable and stale, There is no more development planed or needed as
it only opens up a pipe between two ethernet points using
Alexander Lopez a écrit :
TDMoE is stable and stale, There is no more development planed or needed as it
only opens up a pipe between two ethernet points using Layer 2.
OK... What would be in the advantage in running TDMoE rather than using
IAX or SIP?
day, January 10, 2006 10:19 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] Pri Gateway Hardware
>
> Alexander Lopez a écrit :
>
> > Check out Redfone.
> >
> > http://www.red-fone.com
> >
> > It conv
Alexander Lopez a écrit :
Check out Redfone.
http://www.red-fone.com
It converts PRI or T1 to TDMoE (TDM over Ethernet)
Isn't TDMoE considered "deprecated"?
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
Discussion
Subject: RE: [Asterisk-Users] Pri
Gateway Hardware
Check out Redfone.
http://www.red-fone.com
It converts PRI or T1 to
TDMoE (TDM over Ethernet)
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Johnathan Falk
Sent
Check
out Redfone.
http://www.red-fone.com
It
converts PRI or T1 to TDMoE (TDM over Ethernet)
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Johnathan
FalkSent: Monday, January 09, 2006 4:20 PMTo:
asterisk-users@lists.digium.comSubject: [As
Johnathan Falk wrote:
Does anyone have any
experience using a PRI gateway, I am
looking for a way to have multiple asterisk boxes use one PRI, and send
that
over the network. I herd there are copper gateway devices (like a X100P
card,
only it registers with asterisk using sip, an
ds,
Carlos Alperin
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Imran Ahmed
Sent: Monday, January 09, 2006 5:23 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Pri Gateway Hardware
You donot need multiple a
You donot need multiple asterisk boxes for a single t1. A single p4
box should be helpful, you can use digiums te110p pci card for a
single pri line into the box. The same box could also be on another
network dealing with SIP.
On 1/9/06, Carlos Alperin <[EMAIL PROTECTED]> wrote:
>
>
> All that yo
All that you need is at least two boxes:
1 is going to be the PRI Asterisk box, which
interfaces with the outside world. Also has to be able to communicate via SIP
or IAX with the second box.
2 is the real Asterisk pbx with all the extensions,
and the pbx features. Also has to be ab
Link all of the asterisk boxes via
IAX?
PaulH
- Original Message -
From:
Johnathan
Falk
To: asterisk-users@lists.digium.com
Sent: Tuesday, January 10, 2006 8:20
AM
Subject: [Asterisk-Users] Pri Gateway
Hardware
Does anyone have any experience
us
14 matches
Mail list logo
