with
--
acl=named_acl_example ; Use named ACLs defined in acl.conf
--
Or are you just using deny/permit in sip.conf ?
Lonnie
On May 16, 2013, at 9:06 AM, Dominko Vrljic wrote:
Hi all,
for several days I can see in my astlinux logs:
May 16 00:48:05 pbx local0.notice asterisk
Hi all,
for several days I can see in my astlinux logs:
May 16 00:48:05 pbx local0.notice asterisk[1373]: NOTICE[1405]:
chan_sip.c:25152 in handle_request_invite: Failed to authenticate device
1002sip:1002@95.56.155.46;tag=9a886c0a
May 16 00:48:07 pbx local0.notice asterisk[1373]: NOTICE[1405]:
2663 1 r8169
pbx ~ # cat /dev/ttyACM0
Motion detected!
Motion detected!
Motion detected!
Motion ended!
Motion detected!
Motion detected!
Motion detected!
Regards,
Dominko
- Original Message -
From: Dominko Vrljic dominko_vrl...@yahoo.com
To: AstLinux Users Mailing List
Hi all! I am playing with astlinux and arduino uno device
(http://arduino.cc/en/Main/arduinoBoardUno)
I am traying to establish serail communication with arduino over USB cable.
Obvious I need driver: cdc_acm.ko.
Is it posslible include this driver in next release of astlinux?
Regards,
Dominko
by the SDK for programming the arduino,
but can it be also used for data transactions ?
Lonnie
On May 6, 2013, at 7:29 AM, Dominko Vrljic wrote:
My initial plan is make alam system with arduino and astlinux. Astlinux will
call my mobile phone in case of alarm event.
But, arduino
I have tried to upgrade my pbx to version 0.7.9 but ISDN PCI card does not
work now.
Here is some output from console:
pbx ~ # /etc/init.d/misdn-init restart
---
Unloading module(s) for your misdn-cards:
---
Michael, There's a big difference in kernel modules between these versions.
pbx ~ # ls -alt /lib/modules/2.6.27.57-astlinux/extra/
drwxrwxr-x1 root root 380 May 19 13:34 ..
-rw-rw-r--1 root root 996039 May 19 13:16 mISDN_core.ko
-rw-rw-r--1 root root
Hi,
first let me explain my configuration:
astlinux has ISDN PCI card and SIP trunk over ADSL.
Extensions, analog phones, are connected to asterisk over Linksys PAP2T.
My question is about codec. When I call local PSTN numners over ISDN asterisk
should use alaw codec, but if I call someone over
please send
it.
[/etc/ppp/ip-up and /etc/ppp/ip-down]
Regards
Cleve
-Original Message-
From: Dominko Vrljic [mailto:dominko_vrl...@yahoo.com]
Sent: Wednesday, 6 January 2010 10:59 AM
To: AstLinux Users Mailing List
Subject: [Astlinux-users] peer unreachable when changing
Hi all,
I have couple astlinux installations connected to Internet over ADSL. Pfsense
router is used as Internet gateway.
Peers configured in astlinux from time to time become unreachable both sip and
iax. I have made investigations and found problem in pfsense.
After ADSL change ip address
Cleve,
This problem I also experienced in newer version of astlinux, but David Kerr
reported same issues at July 2008.
http://sourceforge.net/mailarchive/message.php?msg_name=4c6ff7f20807311155o1008f077l96b52f79afce17c1%40mail.gmail.com
I avoid access to the Asterisk GUI.
--- On Tue, 5/5/09,
server
Sep 21 23:46:15 babyasterisk user.warn INADYN[2464]:
W:'RC_IP_CONNECT_FAILED' (0x13) updating the IPs. (it 571)
babyasterisk ~ #
From: Dominko Vrljic
[mailto:[EMAIL PROTECTED]
Sent: Monday, September 22, 2008 10:01 AM
To: 'AstLinux Users Mailing List'
Subject: Re: [Astlinux
Hi,
I found several issues (and solutions) when astlinux run pppoe.
Sometimes ADSL modem boot slowly then astlinux, and astlinux box remains
without internet connection.
Solution is CONNECT_TIMEOUT=0 in /etc/init.d/network script.
Script /etc/init.d/ntpd does not work well very often:
- restart
Guy,
I have several astlinux box in production with pppoe. This is changes I made in
version 0.4.8:
In file /usr/sbin/pppoe-status replace line 64 with
for i in /var/run/ppp*.pid ; do
In file file /usr/sbin/pppoe-start include
CONFIG1=$CONFIG
before line export CONFIG (line 120)
and replace
14 matches
Mail list logo