gt; Nehemiah and newer cores. For older boards that would require the
>>> original C3 kernel target, you should use the generic i586 target from
>>> trunk-1907 or the 0.6 images when those are available.
>>>
>>> Darrick
>>>
>>> Nicholas Sabins
6 images when those are available.
>
> Darrick
>
> Nicholas Sabinske wrote:
>> Darrick,
>>
>> Here's the output
>>
>> - Nick
>>
>> pbx ~ # lspci
>> 00:00.0 Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 05)
>
do an lspci and cat /proc/cpuinfo and post that info here?
>
> That will show me exactly which hardware is included and we can probably
> tell you why one is working and not the other.
>
> Darrick
>
> Nicholas Sabinske wrote:
>> Thanks -- that makes more sense now.
>
dd-ball CF to ide adapters. Perhaps there could be a
> problem with the CF to ide adapter that you're using. However, since it
> loads the image, I'll assume that's not the problem. Is the unionfs
> partition on the same CF as the runnix setup and astlinux images?
>
> (fo
ge-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Nicholas Sabinske
> Sent: Saturday, 6 September 2008 11:11 AM
> To: astlinux-users@lists.sourceforge.net
> Subject: [Astlinux-users] Boot Hangs on astlinux-trunk-1907-geni586 /
> Statusof releases
&
I am trying to get AstLinux going at home on a mini-ITX I have and a
compact flash card. During the comedy of errors of me not having the
right adapters for this, I did have astlinux-trunk-1907-geni586
running on a laptop in the interim
Now that I try booting it on the mini-ITX system (A Via EPIA,
