Thanks Michael and yes I do too but he wants it all in one appliance (
Regards
Michael Knill
-Original Message-
From: Michael Keuter
Reply-To: AstLinux List
Date: Monday, 7 August 2017 at 7:56 pm
To: AstLinux List
Subject: Re: [Astlinux-users] FXS ports
> Am 07.08.2017 um 06
> Am 07.08.2017 um 06:33 schrieb Michael Knill
> :
>
> Yes I know FXS is dead but I have a customer who wants to build lots of
> single or more port FXS appliances running Asterisk.
> Astlinuk is perfect for this but hardware cost is the major driving factor
> here.
> What are the best FXS car
Yes I know FXS is dead but I have a customer who wants to build lots of single
or more port FXS appliances running Asterisk.
Astlinuk is perfect for this but hardware cost is the major driving factor here.
What are the best FXS cards for Astlinux and what would be the cheapest
appliance that they
DN to FXS calls will be internally bridged and do not use RTP.
Reference: http://doc.astlinux.org/userdoc:berofix
>> -Original Message-
>> From: Fernando Fuentes [mailto:digitaldis...@gmail.com]
>> Sent: 29 September 2015 18:36
>> To: astlinux-users@lists.sourcefor
only used the BRI and PRI
modules, but I imagine the FXSes should be fine.
Tom
> -Original Message-
> From: Fernando Fuentes [mailto:digitaldis...@gmail.com]
> Sent: 29 September 2015 18:36
> To: astlinux-users@lists.sourceforge.net
> Subject: [Astlinux-users] FXS
>
>
Am 29.09.2015 um 19:36 schrieb Fernando Fuentes :
> Team,
>
> Looking to add a 2 or 4 port FXS to my astlinux setup, They will be only
> be used for sending and receiving faxes.
> Any recommendations out there?
>
> Has anybody has had any first hand experience with Digium FXS or FXO
> cards ev
I receive faxes directly on Asterisk/Astlinux which converts to a tiff and
emails to me. I send faxes from a Brother multi-function
printer/scanner/fax connected to Linksys/Cisco PAP2T. I have very poor
success rate sending faxes. Sometimes they get through, sometimes they do
not. If I fax wit
Team,
Looking to add a 2 or 4 port FXS to my astlinux setup, They will be only
be used for sending and receiving faxes.
Any recommendations out there?
Has anybody has had any first hand experience with Digium FXS or FXO
cards even?
Regards,
--
Fernando Fuentes
ffuen...@darktcp.net
--
