actually, how is this CSI information different from the spectral scan
feature in the ar92xx chipset??
On 26/06/13 02:04, Ali Abedi wrote:
Hello everyone,
I am also interested in accessing CSI. Please update us as soon as you
got some good news.
Best,
Ali
On 13-04-02 08:18 AM, Nikolay
On 01/06/12 05:19, Adrian Chadd wrote:
Argh, there's more to it.. :-)
For AR9160 and later, you can enable the FFT bit in one of the radar
registers and you'll get some FFT reports for longer radar pulses.
It's enabled by default in the code that we've committed to ath9k and
FreeBSD HAL.
Does this CMOS assumption apply to ath5k as well?
I thought ath5k has noise recalibration which tune the noise floor
accordingly (which seems to be true from our experiments). In madwifi
the noise floor is fixed at -95 or -96, but the ath5k introduces the ani
and noise recalibration.
But the
Hi,
I meant the number of actual antenna was used. I am not sure whether it
has the same antenna setting in /sys/kernel/debug/ieee80211 like ath5k.
regards;
Peizhao
On 15/02/11 19:10, Sagar Bijwe wrote:
I would also like to know that...
-Sagar
On Tue, Feb 15, 2011 at 2:35 PM, Baldomero
Hi Alex,
I am testing the patch. I got the following dmesg message.
I am using compat-wireless-2011-01-17.tar.bz2 and iw-0.9.21.tar.bz2 with
both patches. The linux kernel is 2.6.35 from linux-wireless.
[ 7549.786227] wlan0: No active IBSS STAs - trying to scan for other
IBSS networks with
Hi
Could anyone please tell me the progress on Ath9k HT support for adhoc
mode?
On the latest OpenWRT trunk build, I can only get 22Mbps throughput with
54Mbit/s rate.
below are my setting for the AR9220 radio.
config 'wifi-device' 'radio0'
option 'type' 'mac80211'
option 'macaddr'
Hi
I am wondering whether this problem is due to the OpenWRT or an issue of
the ATH9k.
---[ cut here ]
WARNING: at
/root/openwrt-svn-repo/routerStation/active_trunk/build_dir/linux-ar71xx_generic/compat-wireless-2010-11-20/drivers/net/wireless/ath/ath9k/recv.c:532
Hi,
The firmware was built using OpenWRT svn trunk 24136 that uses
compat-wireless-2010-11-20 and 2.6.36.1 kernel.
The warning message comes right after I configured the radio and bring
it up in adhoc mode.
regards,
Peizhao
On 25/11/10 15:05, Mohammed Shafi wrote:
On Thu, Nov 25, 2010 at
