Re: [SlimDevices: Audiophiles] Is there going to be a bang when I do this?

So there shouldn't be a bang but there are some other drawbacks so I decided not to got the straight to poweramp route and instead put in an integrated and run the TP at full output. -- Limping_Pylon Limping_Pylon's

Re: [SlimDevices: Audiophiles] Is there going to be a bang when I do this?

Eric Carroll;72 Wrote: That's because your mismatch is only 0.5 dB, so you can safely ignore the difference. I noticed that when I removed the pre-amp from the chain,the sound improved so as to have an easier presentation, not as fatiguing - or something. Eric Carroll;72 Wrote:

Re: [SlimDevices: Audiophiles] Is there going to be a bang when I do this?

Limping_Pylon;222076 Wrote: the TP output is 3Vrms 100 ohms impedance and the Krell spec states that the input sensitivity is 2.32 Vrms with 100K ohms input impedance. Will this work ok or will there be a bang? Check out the wiki page

Re: [SlimDevices: Audiophiles] Is there going to be a bang when I do this?

read and re read the wiki entry, i will obviously have to see where my normal listening level falls and then try to add attenuation to get nearer the 100 volume setting on the TP. -- Limping_Pylon Limping_Pylon's Profile:

Re: [SlimDevices: Audiophiles] Is there going to be a bang when I do this?

Have you tested the direct connection using the XLR as of yet? In my case I found that attenuation is not necessary. . -- haunyack Transporter - BK Reference 200.2 - Vandersteen 3A Signature. (Listening room) RWA (Analog) SB3 - Rotel RB 1070 - BW Matrix 805. (Bedroom) Fridgidare - Mirror

Re: [SlimDevices: Audiophiles] Is there going to be a bang when I do this?

haunyack;55 Wrote: In my case I found that attenuation is not necessary. That's because your mismatch is only 0.5 dB, so you can safely ignore the difference. You might get a bit of distortion on that last .5 dB on the scale, but otherwise its no issue. Not everyone is this close. In the

[SlimDevices: Audiophiles] Is there going to be a bang when I do this?

I am thinking of connecting the XLR outputs of my TP to the XLR inputs of a Krell KAV-2250 power amp. the TP output is 3Vrms 100 ohms impedance and the Krell spec states that the input sensitivity is 2.32 Vrms with 100K ohms input impedance. Will this work ok or will there be a bang? Thanks

Re: [SlimDevices: Audiophiles] Is there going to be a bang when I do this?

Limping_Pylon;222076 Wrote: I am thinking of connecting the XLR outputs of my TP to the XLR inputs of a Krell KAV-2250 power amp. the TP output is 3Vrms 100 ohms impedance and the Krell spec states that the input sensitivity is 2.32 Vrms with 100K ohms input impedance. Will this work