Thanks for your input.I will be following Phil's original
recommendation.
--
jhonsber...@msn.com
jhonsber...@msn.com's Profile:
http://forums.slimdevices.com/member.php?userid=4438
View this thread:
Hi Phil.If im only running a digital cable 2-3 feet to a dac, would it
really
matter from a audio quality standpoint if i use a aes or just a optical
digital cable?
--
jhonsber...@msn.com
jhonsber...@msn.com's Profile:
jhonsber...@msn.com;579709 Wrote:
Hi Phil.If im only running a digital cable 2-3 feet to a dac, would it
really
matter from a audio quality standpoint if i use a aes or just a optical
digital cable?
Nope - that would be fine IME
--
Phil Leigh
You want to see the signal path BEFORE it
Would anyone here recommend a line balancing transformer,using the
unbalanced
analog output and placing the unbalanced cables into this transformer
and then
putting balanced cables from the transformer to the inside house amp?
I have no idea if this would work properly or would it degrade the
jhonsber...@msn.com;579380 Wrote:
Would anyone here recommend a line balancing transformer,using the
unbalanced analog output and placing the unbalanced cables into this
transformer and then putting balanced cables from the transformer to
the inside house amp?
I have no idea if this would
DCtoDaylight;579469 Wrote:
While this would work, it's not a solution I would recommend, for two
reasons. First off, most transformers exhibit some level of distortion
and frequency response issues. They are often, not as perfect as some
would have you believe. Secondly, I'm a big
Would this work, leaving the ground connections alone?
--
empty99
empty99's Profile: http://forums.slimdevices.com/member.php?userid=3488
View this thread: http://forums.slimdevices.com/showthread.php?t=82242
I currently am using the Transporter's balanced analog output to feed a
amp
to outside speakers(due to long distance cable run) but i wish to also
use
the Transporter's balanced output for a amp that I use inside the
house.
I switch frequently between the two systems(inside and Outside)
Personally, I would use the AES/EBU output of the TP to drive a long
digital cable to a suitable DAC near your outside amp. Then use the TP
balanced analogue output to your inside amp.
Normally outside systems do not have the absolute highest fidelity
anyway (YMMV).
This is what AES/EBU was
