Hi.
Im looking to fix a slow leak in a tailwheel on my pik.
Is there a trick to getting the axle out once the split pin and nut have
come out?
Cheers
James
___
Aus-soaring mailing list
Aus-soaring@lists.base64.com.au
http://lists.base64.com.au/listinfo
Dear James,
Not sure if the following helps, but one issue in general with tailwheel
axles is that it is possible to bend them on very hard tailwheel
touchdowns, or landing touch down just before the lip between the low
surface of the runway gravel and the start of the bitumen seal. Bent
axl
.
What is happening re. council and BM airfield?
Regards
Noel
From: Aus-soaring [mailto:aus-soaring-boun...@lists.base64.com.au] On Behalf
Of Roger.D
Sent: Saturday, June 11, 2016 1:51 PM
To: Discussion of issues relating to Soaring in Australia.
Subject: Re: [Aus-soaring] Pik 20
ng in Australia.
*Subject:* Re: [Aus-soaring] Pik 20 tailwheel axle removal
Dear James,
Not sure if the following helps, but one issue in general with
tailwheel axles is that it is possible to bend them on very hard
tailwheel touchdowns, or landing touch down just before the lip
between the low
>
>
> Noel
>
>
>
> *From:* Aus-soaring [mailto:aus-soaring-boun...@lists.base64.com.au
> ] *On Behalf Of *Roger.D
> *Sent:* Saturday, June 11, 2016 1:51 PM
> *To:* Discussion of issues relating to Soaring in Australia.
> *Subject:* Re: [Aus-soaring] Pik 20 tailwheel