Hello,
18.02.2009 00:28, Mag Gam wrote:
Interesting problem. I was the one who started the previous thread
about the naming.
Ah, nice to see you're still with us here :-)
When I'm talking with the management of a potential customer, I
neither use the tag line, nor do we read over the
Ralf Gross said:
lately I've seen that verify jobs that have differences just doesn't
finish.
bacula 2.4.4-b1, psql
*st dir
[...]
Running Jobs:
JobId Level Name Status
==
9602 VolumeT
Hello.
I'm looking for the way how to configure schedule resource, that feet my
needs. What I need is to run 4 Jobs for client. Each Job have to be
executed once in 4 weeks starting from sun-sat. Sunday backup level have
to bee Full following by incremental starting from mon-sat.
So for example:
Allan Black wrote:
Tom Sommer wrote:
Takes backup of all files in /usr/local/example/, and of all *.xml files
in /example01/, /example02/ and /example03/ - recursively (the .xml
files are in random subfolders within the example folders, along with a
lot of other files which I don't
Hi,
18.02.2009 04:46, Jeff Dickens wrote:
It was a couple of years ago I first brought this up. I guess you and I
are the only one who would find a cross-sd migration/copy useful.
I doubt that... I'd definitely find this interesting and some of my
customers would probably like to use that
Hi John
This machine is backuped up by a SSH tunnul.
When Director backup this client, it creates a ssh tunnel, with the needed
port tunneling.
This configuration works on another machine prefectly.
See this howto : http://wiki.bacula.org/doku.php?id=sshtunnel
Just to give a try, I did
Hi,
18.02.2009 09:36, Ralf Gross wrote:
Ralf Gross said:
lately I've seen that verify jobs that have differences just doesn't
finish.
bacula 2.4.4-b1, psql
*st dir
...
This is starting to be annoying because the volumes are then locked until
I cancel thee job.
24h later I tried to
Dear Bacula users,
I'm looking for an advice for my backup setup. The basic question is if I
should use the recycle feature or not.
Basically the setup is as follows:
1. The storage daemon writes to file volumes named hostname(full|incr)
into a directory /somewhat/backups
2. These files
On Wed, 18 Feb 2009 07:44:04 + (GMT), Tom Yates said:
Would you know if I can disable signing in the configuration, or must I
recompile; and if the latter, is it a config option or will I need to mess
with the source myself?
You would need to modify the source.
__Martin
On Tue, 17 Feb 2009 20:24:02 -0800, Landon Fuller said:
The private key is needed during backup if you use PKI Signatures.
Right. Currently, enabling PKI encryption also enables signing, but
the encryption implementation does not require this, and the private
key is not necessary for
Fahrer, Julian wrote:
You could say run from bconsole and select the jobs you want to run
This doesnt work. A new backup begin (with a new jobid). What I want is
continue with the backup started before the system stoped. Notice that
my full backup allocates 5 tapes. What to do if something
Hi list!
Well, I managed to get an iso image for a bacula restore cdrom.
Following the instructions at the manual I did it making an static
bacula-fd:
cd bacula-source
./configure \
--prefix=/usr \
--sbindir=/usr/sbin \
--sysconfdir=/etc/bacula \
--with-scriptdir=/etc/bacula \
Hello,
This is to warn those of you who regularly update your version from the SVN
that in the next few days (probably tonigh), we will be applying a patch to
the source code in the development versions of the SVN that will change the
format of the database.
If do not update your source code,
Hi John,
I've extracted the command executed by the init.d/bacula-fd script
which is (without daemon) and it ouputs nothing :
[r...@dell1 temp]# /usr/sbin/bacula-fd -u root -g bacula -c
/etc/bacula/bacula-fd.conf
[r...@dell1 temp]# echo $?
0
[r...@dell1 temp]#
It doesn't seem to have
I got a similar issue in the past.
My schedule are setted to start at 23:05 but the jobs are actualy starts
after midnight.
I was using the option Volume Use Duration to 23 hours.
So when the backup actually starts it was on the 23 hours period yet and
he try to use the yesterday volume because
For special data we have a backup scheme that does not really fit
bacula's idea of incremental backups:
There is a directory, say /archive, that is empty by default. If
something needs to be backed up by bacula, it is copied (or moved)
into this directory. Then the backup job is started
On Wed, Feb 18, 2009 at 8:48 AM, Thomas Manson
dev.mansontho...@gmail.com wrote:
Hi John,
I've extracted the command executed by the init.d/bacula-fd script
which is (without daemon) and it ouputs nothing :
[r...@dell1 temp]# /usr/sbin/bacula-fd -u root -g bacula -c
On Wed, Feb 18, 2009 at 8:29 AM, Win Htin win.h...@gmail.com wrote:
Hi folks,
Is there a way to recover a volume that was put into error status?
This happened to two volumes, each from different pool in my
production environment.
If the tapes are not physically damaged you can recover by:
On Wed, Feb 18, 2009 at 7:39 AM, Luis Marcelo Achite
lmach...@dir.iai.int wrote:
Fahrer, Julian wrote:
You could say run from bconsole and select the jobs you want to run
This doesnt work. A new backup begin (with a new jobid). What I want is
continue with the backup started before the system
bacula-fd: filed_conf.c:438-0 Inserting director res: machine.FQDN-mon
18-Feb 15:10 machine.FQDN-fd: ERROR TERMINATION at bsys.c:508
Could not open pid file. /var/run/bacula/bacula-fd.9102.pid ERR=No
such file or directory
:o)))
the rpm did not create that directory.
I've created it and now it
Thanks John. I have done that before but still haven't seen those
volumes re-used hence am not sure if setting status back to append
is all that is required. Does Bacula put a new EOD or something like
that at the last position data was written?
Win
On Wed, Feb 18, 2009 at 9:04 AM, John Drescher
On Wed, Feb 18, 2009 at 9:31 AM, Win Htin win.h...@gmail.com wrote:
Thanks John. I have done that before but still haven't seen those
volumes re-used hence am not sure if setting status back to append
is all that is required. Does Bacula put a new EOD or something like
that at the last
Hi All,
I'm having a non-critical problem with Bacula in my production
environment. I have 2 DELL TL-4000 libraries with 2 drives each.
For each library on the Storage daemon I defined the 2 resources
for the drives and 1 for the changer:
Hi All,
I'm having a non-critical problem with Bacula in my production
environment. I have 2 DELL TL-4000 libraries with 2 drives each.
For each library on the Storage daemon I defined the 2 resources
for the drives and 1 for the changer:
Hi John,
Thanks for the reply. Obviously 1 backup use 1 drive, I know this.
The problem is that I run 16 backup jobs (4 of them run simultaneously
and the other ones stay in queue), and all of them run on the same drive
Are they all going to the same pool?
John
Just in case someone runs into this too:
Added a bunch of clients to the bacula-dir.conf (containing Client {}
stanzas with Name, Address, FDPort, Catalog, Password etc. directives),
but not yet all the other associated stuff like
Storage/Pool/Job/Fileset/Schedule definitions for them, then
On Wed, 18 Feb 2009 09:56:16 -0500
John Drescher dresche...@gmail.com wrote:
Hi John,
Thanks for the reply. Obviously 1 backup use 1 drive, I know this.
The problem is that I run 16 backup jobs (4 of them run
simultaneously and the other ones stay in queue), and all of them
run on the
On Wed, Feb 18, 2009 at 04:45:31PM +0100, Diego Roccia wrote:
On Wed, 18 Feb 2009 09:56:16 -0500
John Drescher dresche...@gmail.com wrote:
Hi John,
Thanks for the reply. Obviously 1 backup use 1 drive, I know this.
The problem is that I run 16 backup jobs (4 of them run
On Feb 18, 2009, at 9:20 AM, blues...@bluesman.it wrote:
On the director I configured only the changer resource:
--
Storage {
Name = DELL-TL4000
Address = 10.1.5.109
SDPort = 9103
Password =
The update status from error to append failed. Took the tapes
out of the library, checked physically and put it back in the slots,
updated the slots and still not working. Tried the CLI mt -f
/dev/nstX eod command on both tapes from each drive but that also
failed with input output error message.
Michael Galloway wrote:
On Wed, Feb 18, 2009 at 04:45:31PM +0100, Diego Roccia wrote:
On Wed, 18 Feb 2009 09:56:16 -0500
John Drescher dresche...@gmail.com wrote:
Hi John,
Thanks for the reply. Obviously 1 backup use 1 drive, I know this.
The problem is that I run 16 backup jobs
Thanks for all the responses. This has led me to a partial answer.
John's suggested tests yielded surprisingly high numbers. One thing
led to another, and I finally found that turning off compression
increased most clients' performance by a factor of 10. I must have
done something wrong when I
On Wed, Feb 18, 2009 at 03:20:51PM +0100, blues...@bluesman.it wrote:
Hi All,
I'm having a non-critical problem with Bacula in my production
environment. I have 2 DELL TL-4000 libraries with 2 drives each.
For each library on the Storage daemon I defined the 2 resources
for the
maybe try something like this, this is how i have storage configured in my
director config:
# Definition of DDS tape storage device
Storage {
Name = HP4048
SDPort = 9103
Media Type = LTO-4 # must be same as MediaType in Storage
daemon
Autochanger = yes
On Wed, 11 Feb 2009 16:34:16 -0800, Doug Sampson said:
I poked around some more. I discovered the 'ldd' command
which shows the
libraries used/required by bacula-fd as follows:
r...@pisces:/root# ldd /usr/local/sbin/bacula-fd
/usr/local/sbin/bacula-fd:
libz.so.4 =
Dear my friends, I need your help !
I have problems with bscan, I need restore files from a volume of 2 months
ago. When I run the bscan shows the error message below :
interno:/backup/rosangela# bscan -s -m -c bacula-sd.conf -v -V
Vol-rosangela-full-dados0006 rosangela-dev
bscan: butil.c:282
On Feb 18, 2009, at 3:26 AM, Martin Simmons wrote:
On Tue, 17 Feb 2009 20:24:02 -0800, Landon Fuller said:
The private key is needed during backup if you use PKI Signatures.
Right. Currently, enabling PKI encryption also enables signing, but
the encryption implementation does not require
Hi,
those running FreeBSD 8-current could take a look into
~src/tools/tools/nanobsd/rescue
This will build a bootable .iso I386/AMD64 image
with TMPFS mounted /tmp and MDMFS mounted /etc and /var
which is intended as a starting point for rescue activities
like a bacua client...
Comments and
Hello,
The code for the database format change, which I mentioned in my previous
email today, is now committed to the SVN.
Bacula can now (by default) keep track of more than 4 billion File
records! :-)
Best regards,
Kern
Doug Sampson wrote:
On Wed, 11 Feb 2009 16:34:16 -0800, Doug Sampson said:
I poked around some more. I discovered the 'ldd' command
which shows the
libraries used/required by bacula-fd as follows:
r...@pisces:/root# ldd /usr/local/sbin/bacula-fd
/usr/local/sbin/bacula-fd:
Hi,
18.02.2009 18:34, post...@bertholino.com.br wrote:
Dear my friends, I need your help !
I have problems with bscan, I need restore files from a volume of 2 months
ago. When I run the bscan shows the error message below :
interno:/backup/rosangela# bscan -s -m -c bacula-sd.conf -v -V
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Mingus Dew wrote:
Hi all,
Been using Bacula 2.4.2 on Solaris 10_x86 for almost 2 years now.
Recently tape backups have been entering into a state that I can only
describe as limbo.
If I check the status of the director, I may see something
Sorry. I forgot to mention MySQL 4. Its still responding. I've tested it
while the jobs were hung. Also, if I cancel the hung job, the next tape job
in queue starts and completes just fine.
-Shon
On Wed, Feb 18, 2009 at 4:13 PM, Ryan Novosielski novos...@umdnj.eduwrote:
-BEGIN PGP SIGNED
Joel Staker jsta...@ci.watsonville.ca.us wrote:
We cancelled our Arcserve support agreement in December and it looks
like moving to Bacula has given us a more stable system with a total 3
year savings of around 45K!
We've had Bacula 2.2.8 in production since October, and in the last
month, I
44 matches
Mail list logo
