Hi,
just concluding my question. Yes! It's possible run a bscan over a
encrypted tape and recreate the Catalog for it, even if you don't have the
keys. Of Course, to do a restore you'll need such keys.
See ya!
On Wed, Mar 21, 2012 at 4:00 PM, Rickifer Barros
wrote:
> Hi Use
Hi Users...
Before I try do that I would ask you if it works run a "bscan" directly
over a tape with an encrypted backup by Bacula. Would be recreated the
Catalog for that tape, assuming I don't have the bootstrap file anymore?
Thanks.
-
On Mon, Sep 26, 2011 at 2:21 PM, John Drescher wrote:
> > I've experienced some strange problems with the "Recycling" on my Bacula.
> > For example, I have a pool to my Full Backups where I have one different
> > tape for each weekend in the month. Well, on the second week I've used
> > FW2-001 w
Hello Users,
I've experienced some strange problems with the "Recycling" on my Bacula.
For example, I have a pool to my Full Backups where I have one different
tape for each weekend in the month. Well, on the second week I've used
FW2-001 with Volume Retention of 27 days = 2332800 seconds and at t
entries on the
catalog are deleted too.
Rickifer Barros
On Wed, Aug 31, 2011 at 3:00 PM, hymie! wrote:
>
> Konstantin Khomoutov writes:
> >hymie! wrote:
> >
> >> A volume will not be recycled until the Volume Retention has expired,
> >> even if all of th
It's a Brazilian Book (I'm Brazilian) ;)
It was written by Heitor Medrado de Faria
http://www.brasport.com.br/linux-br/seguranca-br-2-3/bacula-ferramenta-livre-de-backup-br.html
On Fri, Aug 26, 2011 at 9:14 PM, Dan Langille wrote:
>
> On Aug 26, 2011, at 2:19 PM, Ricki
a-dir-jobs.conf
@/etc/bacula/bacula-dir-storages.conf
This allow a better organization of your confs.
That's it Man!
I hope that this be useful to someone... :)
Rickifer Barros
--
EMC VNX: the world's simplest storage,
Oh...in my example I'm using the Master Key but it also works normally with
the ".pem" keys file.
On Wed, Jul 27, 2011 at 10:36 AM, Rickifer Barros
wrote:
> I use encryption with Windows 7 and it works perfectly. But I put my PKI
> configuration into the FileDeamon { }
I use encryption with Windows 7 and it works perfectly. But I put my PKI
configuration into the FileDeamon { } directive instead the Director { }
directive. Also, I didn't need to install OpenSSL separately, I just
installed the Bacula Client 5.0.3 for windows.
FileDaemon {
I disabled the Compression and my speed rate boosted from 8.2 MB/s to 40.8
MB/s but I'm still using Bacula encryption.
On Mon, Jul 25, 2011 at 10:14 PM, James Harper <
james.har...@bendigoit.com.au> wrote:
> > 2011/7/25 Rickifer Barros :
> > > Hello Guys...
> &
OK John...I'll test it.
On Mon, Jul 25, 2011 at 12:13 PM, John Drescher wrote:
> On Mon, Jul 25, 2011 at 11:06 AM, Rickifer Barros
> wrote:
> > I did this beforebut, I didn't know how check in Debian if it really
> is
> > being compressed by the tape drive. Th
hose to trust on the software
compression...YEAH I'm noob on Tape manipulation... :t
On Mon, Jul 25, 2011 at 11:57 AM, John Drescher wrote:
> 2011/7/25 Rickifer Barros :
> > Hello Guys...
> >
> > This weekend I did a backup with a size of 41.92 GB that took 1 hour
I forgot to say that the files I backed up are locally in the Bacula Server.
On Mon, Jul 25, 2011 at 11:48 AM, Rickifer Barros
wrote:
> Hello Guys...
>
> This weekend I did a backup with a size of 41.92 GB that took 1 hour and 24
> minutes with a rate of 8.27 MB/s.
>
> M
think that this rate (8.27 MB/s) is too much slow for such configuration.
I'd like to know how much rate you are getting using Encryption and
Compression and what I suppose to do to increase the Bacula's performance.
Thanks
Yeah, John...it workedthanks man.
On Wed, Jul 20, 2011 at 4:17 PM, John Drescher wrote:
> On Wed, Jul 20, 2011 at 3:13 PM, John Drescher
> wrote:
> > On Wed, Jul 20, 2011 at 3:10 PM, Rickifer Barros
> > wrote:
> >> Could I do a "release" comma
Could I do a "release" command using the Directive "Run After Job"?
On Wed, Jul 20, 2011 at 3:55 PM, John Drescher wrote:
> > Is it possible send a unmount command after specific jobs? Therefore I
> could
> > set up my Backup Catalog Jobs to umount the tape at Fridays and
> > Saturdaysso the
e at Fridays and
Saturdaysso the "Offline on Umount" directive would eject the tape.
Thanks in advance.
Rickifer Barros.
--
10 Tips for Better Web Security
Learn 10 ways to better secure your business today. To
Also, I could set up for my Jobs and Files Retention the same that Volume
Retention without problems, is that right?
On Wed, Jul 20, 2011 at 11:15 AM, Rickifer Barros
wrote:
> Thanks Jeremy...I'll do that.
>
>
> On Wed, Jul 20, 2011 at 11:13 AM, Jeremy Maes wrote:
>
>&
Thanks Jeremy...I'll do that.
On Wed, Jul 20, 2011 at 11:13 AM, Jeremy Maes wrote:
>
> Op 20/07/2011 16:03, Rickifer Barros schreef:
>
> Ok...but I don't want to disable the pruning entirely...I want Bacula do
> the pruning only according my settings. If I set the Auto
2011 at 10:48 AM, Jeremy Maes wrote:
> Op 20/07/2011 15:20, Rickifer Barros schreef:
>
> Hello Guys...
>>
>> Why Bacula always after each Job try to prune Jobs older than 6 months
>> even when there's no settings to this?
>>
>> 20-Jul 10:01 test-dir
Hello Guys...
Why Bacula always after each Job try to prune Jobs older than 6 months even
when there's no settings to this?
20-Jul 10:01 test-dir JobId 96: Begin pruning Jobs older than 6 months .
20-Jul 10:01 test-dir JobId 96: No Jobs found to prune.
20-Jul 10:01 test-dir JobId 96: Begin prunin
Hello Guys...
Can I use another SMTP client than bsmtp, like sendEmail? I've tried put the
mailcommand based on sendEmail, sending the message to a Third Party Email
Server but it didn't worked.
Thanks in Advance
Ricki
Wellhow I could see...Verify is useless for checking my backups on tape,
is that right?
On Fri, Jul 15, 2011 at 1:45 PM, Rickifer Barros
wrote:
> Very important information John.
>
> Thank you very much.
>
>
> On Fri, Jul 15, 2011 at 1:36 PM, John Drescher wrote:
>
&
SoShould I set up (n - 1) days for my retention times?
On Fri, Jul 15, 2011 at 1:39 PM, John Drescher wrote:
> 2011/7/15 Rickifer Barros :
> > Hello Users...
> >
> > Just to confirm one little thing...I've read that Bacula will try keep
> your
> >
Very important information John.
Thank you very much.
On Fri, Jul 15, 2011 at 1:36 PM, John Drescher wrote:
> >> I was using /dev/nst0 but I'm trying the /dev/st0 just for testing,
> because
> >> I've notice that even with any of them, Bacula controls if it will
> rewind or
> >> not. At least,
On Fri, Jul 15, 2011 at 1:25 PM, Martin Simmons wrote:
> >>>>> On Thu, 14 Jul 2011 17:27:51 -0300, Rickifer Barros said:
> >
> > I was using /dev/nst0 but I'm trying the /dev/st0 just for testing,
> because
> > I've notice that even with any of the
ays it can be Recycled.
There's some way to make this using just the Volume Retention or I'm forced
to use "Maximun Volume Jobs" together?
Thanks
Rickifer Barros
--
AppSumo Presents a FREE Video for
I was using /dev/nst0 but I'm trying the /dev/st0 just for testing, because
I've notice that even with any of them, Bacula controls if it will rewind or
not. At least, this was I could to notice.
On Thu, Jul 14, 2011 at 4:51 PM, John Drescher wrote:
> > I'm running Verify Tests with the VolumeTo
Files Examined: 431
Non-fatal FD errors:0
FD termination status: OK
SD termination status: OK
Termination:Verify OK
14-Jul 16:00 frajola-dir JobId 35: Begin pruning Jobs older than 6 months .
14-Jul 16:00 frajola-dir JobId 35: No Jobs found to prune.
14-Jul 16:00
011 10:26:44 -0300, Rickifer Barros said:
> >
> > So, whatever how it does, I think that is a good idea set up a Verify Job
> > soon after a Backup Job to ensure that data in the volume, isn't it?
>
> Yes, that's what I do, but some people claim that it wastes time and we
So, whatever how it does, I think that is a good idea set up a Verify Job
soon after a Backup Job to ensure that data in the volume, isn't it?
On Thu, Jun 2, 2011 at 8:18 AM, Martin Simmons wrote:
> > On Thu, 2 Jun 2011 11:10:32 +0200, Ralf Gross said:
> >
> > I always thought that a Volume
Yes John...
Now, I think that I understood perfectly and I have tested it too.
VolumeToCatalog = Compares the files in a Storage Volume with the Catalog;
DiskToCatalog = Compares the files of the File Deamon's File Set with
the Catalog;
Catalog = Like the DiskToCatalog but for
.
Just one more question for nowit seems such obvious, but, the Level
VolumeToCatalog would be when I use Tapes? Is that right?
On Tue, May 31, 2011 at 5:06 PM, John Drescher wrote:
> 2011/5/31 Rickifer Barros :
> > Hello Bacula Users,
> >
> > I'm trying to test th
e this Verify Job.
Another thing...this type of Job is just to verify a group of file that
don't must change often. But, how about backup consistency checking, bacula
do this implicitly or I need do additional settings for this.
Thanks in advance.
Rickifer Barros.
---
write on are created),
> than Bacula will work without problems with it...
>
> 2011/5/30 Rickifer Barros
>
>> Hello Everyone,
>>
>> I would like to know if somebody here have used Bacula with the IBM TS2240
>> Tape Drive. I will buy this Tape Drive and I intend
Hi,
I'm reading about the verification File Set options so, how I could
understand, there are three modes: basejob (for Full Backups), accurate (for
Incr/Diff) and verify (for Catalog). Is that right? If it is, what options
are the best for a reliable verification and don't overhead the backup tim
Hello Everyone,
I would like to know if somebody here have used Bacula with the IBM TS2240
Tape Drive. I will buy this Tape Drive and I intend to use Bacula in it. The
TD didn't arrive yet then I couldn't test it with Bacula.
K R
Thanks.
--
umeteste BSDefault
Volumes marked with "*" are online.
=
Thank you Guys, this group is helping me a lot.
2011/5/16 Radosław Korzeniewski
> Hello,
>
> 2011/5/16 Rickifer Barros
>
>> Hi Folks,
&g
Hi Folks,
I have not found a way to check in wich volume is such job. If I have backed
up in many tapes and I want to know where is such job, i.e. what volume is
the job, then I could to pick up such tape and run the restore.
Thanks in advance.
Rickifer Barros
Yes! This command "status client" works fine for what I wanted, but, I think
that it will be cool if Bacula calculate the estimated time based on these
information and show it with the command "status client".
Thank you everyone.
On Thu, May 12, 2011 at 4:38 PM, hymie!
Ok, but, I would like to see a estimated time for the end of the backup or
even the transfer rate, but, if there's no way, ok.
Thanks John.
On Thu, May 12, 2011 at 4:30 PM, John Drescher wrote:
> 2011/5/12 Rickifer Barros :
> > Hello Bacula Users,
> >
> > There'
Hello Bacula Users,
There's some way to see the progress of a Backup or Restore during your
execution? Because with the "status dir" command, I can just see the "backup
is running" and nothing more. I didn't found nothing in the Manual about
that too.
Thank
I'm sorry, I wrote Mark, but is Mike...a little mistake :)
On Mon, May 9, 2011 at 1:59 PM, Rickifer Barros wrote:
> Hello Mark,
>
> You'll find what you need about this in the "Using File
> Relocation<http://www.bacula.org/en/dev-manual/
/Restore_Command.html#SECTION002860000
Kind Regards
Rickifer Barros
On Mon, May 9, 2011 at 12:49 PM, Mike Hobbs wrote:
> Question, I'm trying to do a restore of a file system, in this case,
> /opt. I want to restore everything on this partition.
>
> I have a spa
44 matches
Mail list logo
