W dniu 19.04.2013 11:17, Radosław Korzeniewski pisze:
> Hello,
>
> 2013/4/19 Marcin Haba mailto:ganius...@gmail.com>>
>
>
> For your solution I think that better will be to put your bconsole
> requests in a shell script.
>
>
> I have a question about it. I can't run an Admin Job which call
2013/4/6 Alberto Caporro
> Hi everybody,
>
> I have an update on this; last night the backup job ran again, this time
> as an incremental one. The job terminated successfully, but backup size
> again doesn't make sense, being roughly 88G (see log at the end of the
> mail).
>
>
> Hi,
That is beca
Hi,
I am not sure what do you mean about invisible tapes, so could you write a
bit more information about your issue?
How many tapes have you labeled, and how many tapes is showing when you
call "list volumes" command?
Could you give an output from update slots and list media commands?
Do you u
W dniu 06.09.2012 17:18, Ana Romero pisze:
> Hello Jeremy,
>
> I'm trying to do is run during the first weekend ( fri, sat and sun )
> all my full backups with the following schedule :
>
> Set backup1:
> Run=Level=Full 1st fri at 18:00
> Set backup2:
> Run=Level=Full 1st sat at 18:00
> Set backup3
2012/9/6 Ana Romero :
> Hello list,
>
> I don't know how to configure a schedules for run full the first weekend of
> the month ... you help me?
>
> Thank very much
> Regards
Hi,
Maybe that for 1st Sunday of the month:
Schedule {
Name = "SomeSchedule"
Run = Level=Full 1st sun at 9:00
}
or t
W dniu 06.09.2012 03:23, Alex Lucas pisze:
> On 05/09/12 19:24, Christian Manal wrote:
>> On 05.09.2012 12:43, Alex Lucas wrote:
>>> Dears,
>>>
>>> Is there a way to run a complex command or even a script on a client?
>>>
>>> So far I have tried two ways and failed:
>>> 1) when a command (e.g. in "
W dniu 06.09.2012 00:37, Simon Tyler pisze:
> Hello,
>
> I'm having some issues with bacula.
>
> This is a new install, I have not used bacula before. So far I've
> successfully backed up from a client to a file on the bacula server, now
> I'm trying to get autoloader working so I can backup to tap
W dniu 04.05.2012 18:34, ganiuszka pisze:
> Number of volumes in pool you can calculate by using below schema:
>
> Vol. Retention time
> volumes number = -- 1
> number of backups per volume * backup interval time
>
> In your cas
W dniu 04.05.2012 14:45, Anton Gorlov pisze:
> in my conf for pool with diff's
>
> Volume Retention = 10 day
> Recycle Current Volume = Yes
> UseVolumeOnce = Yes
>
> after 10 days bacula remove old backup's in this pool?
Hi,
After 10 days from marked volume as Used of Full, volume
W dniu 30.04.2012 17:23, Jack Cobb pisze:
> John,
>
> I have tried using the device names (i.e. /dev/nst2 and /dev/nst3) instead
> and receive the same error.
>
> Jack
>
>
> On Mon, Apr 30, 2012 at 11:11 AM, Jack Cobb wrote:
>> Hello everyone,
>>
>> I am wanting to copy data from one tape to a sec
2012/4/18 Andre Rossouw :
> Hello.
>
> I have a system running Ubuntu 10.04 with Bacula 5.0.1. and a SCSI
> Tandberg LTO-3 HH drive. It has been running without problems since
> 2010. Last week it started writing ~200GB data to the media, and
> reporting that the media is full.
>
> 18-Apr 16:13 ubu
2012/2/5 Jan Lentfer :
> Am 05.02.2012 11:26, schrieb Jan Lentfer:
>> Currently I have a setup where I use 3 file pools for Incr, Diff and
>> Full. I use copy jobs to copy the incr jobs to one tape drive (DLT) and
>> the full and diff jobs to another tape drive (LTO-1).
>>
>> Now I thought about do
2011/11/8 Luca Bertoncello :
> Hi, list!
>
> This night the full backup did not work.
> I'm trying to find the problem, but I can understand it...
>
> I think, the problem is somewhere in the changer...
> If I give an "update slots" I get:
>
> Connecting to Director hal9000.netzing.intra:9101
> 100
2011/11/8 Kenney, William P. (Information Technology Services)
:
> Hello All,
>
>
>
> Have been running Bacula 5.0.3 without any major problems, but the
> BackupCatalog job is failing.
>
> Bacula-director is running.
>
> MySql is up and I can log in from the console with no problem.
>
Hi,
Did you
2011/10/14 Henrique Machado :
>
> I've migrated from bacula 3.0.3 to 5.0.3, and my bacula-dir.conf stay the
> same. But now, on this new version my Incremental backup looks like is
> pruning the Full Backup for this client:
>
> http://pastebin.ca/2090064
> Somebody have an idea?
> Thanks
Hi,
I re
2011/10/7 Jeff Shanholtz :
> Thanks guys. I'm pretty sure I'm using sqlite (having a hard time
> determining that definitively, but I don't think I did anything from an
> installation point of view beyond just installing bacula). I assume this
> script is postgresql specific. Looks like the fastest
2011/6/21 Christian Tardif :
> Hi,
>
> I have a VXA-2 tape used with X23 tapes (replacement for V23 tapes)
> that should backup 80GB Uncompressed. Bacula stops after an average of
> 27GB, stating that the media is full. It seems that tapeinfo thinks
> that it has 80GB available (see below).
>
> H
2011/6/6 John Drescher :
> 2011/6/6 Cleuson Alves :
>> Hello everybody, I still can not understand what the advantage of using the
>> label inside the pool instead of creating the volume at hand.
>> Here's an example:
>>
>> Pool {
>> Name = Full_Server-01
>> Pool Type = Backup
>> Sto
Hi,
Does anyone have any information about the Bacula Twitter channel?
Since almost two years there is no news. It would be nice if someone
will write some messages from Bacula world from time to time.
Regards.
gani
--
E
2011/3/27 Lawrence Strydom :
> Hi list,
>
> I am trying to get bacula to add a timestamp to the label. The manual
> talks about using variable expansion but states that it is deprecated
> and the new python scripting functionality that replaces it is not yet
> documented.
> I have defined my pool r
Hi,
Why do you need to store full and incremental/differential backups in
the same pool? You can do it with two or more pools - one for full
backup and the rest for incremental/differential backups. (eg. by
using "Full Backup Pool", "Differential Backup Pool" ,"Incremental
Backup Pool" Job resourc
kware) and on some distributions the BCMath need to
install as a module from package apart from the PHP package (for
example Fedora).
Regards.
gani
W dniu 13 marca 2011 21:07 użytkownik Dan Langille napisał:
> On 3/12/2011 9:33 PM, ganiuszka wrote:
>>
>> W dniu 13 marca 2011 01:0
W dniu 13 marca 2011 01:01 użytkownik Dan Langille napisał:
> On 3/12/2011 9:29 AM, ganiuszka wrote:
>>
>> W dniu 11 marca 2011 21:45 użytkownik ganiuszka
>> napisał:
>>>
>>> Hi,
>>> In my example jobid is putting in:
>>> ... File.JobId=8...
&g
$result <<= 6;
$result += strpos($base64, substr($val, $i , 1));
}
$ret[$key] = ($is_minus === true) ? -$result : $result;
}
return $ret;
}
and here is usage for this:
$lstat = 'gB DL+b IGg B A y
implementation in Bacula and this:
http://old.nabble.com/The-File.LStat-field-td940366.html
Regards.
gani
2011/3/11 Dan Langille :
> On 3/9/2011 5:36 PM, ganiuszka wrote:
>
>> 2011/3/9 Mike Eggleston:
>>>
>>> Afternoon,
>>>
>>> I just noticed one o
Hi,
Here you have SQL function for PostgreSQL (I took it from bweb):
CREATE PROCEDURAL LANGUAGE plpgsql;
BEGIN;
CREATE OR REPLACE FUNCTION base64_decode_lstat(int4, varchar) RETURNS int8 AS $$
DECLARE
val int8;
b64 varchar(64);
size varchar(64);
i int;
BEGIN
size := split_part($2, ' ', $1);
b64 :
2011/2/21 Jari Fredriksson :
> On 21.2.2011 0:57, ganiuszka wrote:
>> Hi,
>>
>> The "free" command is running before every WRITE. If "free" command
>> does not work properly then WRITE will not work. "dvd-handler" script
>> use
2011/2/21 Jari Fredriksson :
> On 21.2.2011 0:57, ganiuszka wrote:
>> Hi,
>>
>> The "free" command is running before every WRITE. If "free" command
>> does not work properly then WRITE will not work. "dvd-handler" script
>> use
2011/2/20 Jari Fredriksson :
> That free command probably works, as the dvdhandler is totally cabable
> to READ, but not WRITE to the media. I restored data from my Lenny
> backup into new Squeeze without problems. But any try to write to the
> media failed, including a try to blank a dvd using gro
e problems then, as the bug reports
> were put out and forgotten. Bacula just messed up with its database,
> volumes and all. When I went to 2.0.2 everything worked fine.
>
>
> On 20.2.2011 20:28, ganiuszka wrote:
>> Hi,
>> At home I use DVD with Bacula from a long
Hi,
At home I use DVD with Bacula from a long time and I have not had
problems with this functionality. I use the Debian Squeeze also (but
with kernel 2.6.36) and the DVD backup works properly. My Bacula is
compiled from Branch-5.0 (git repository) but in the past I used older
Bacula versions with
W dniu 19.11.2010 12:49, Alan Brown pisze:
>
> Does anyone know if there's a way of only using 3 numeric digits?
>
> ie 001-999 instead of 0001-
Hi,
You can use the Counter Resource. For example:
Counter {
Name = "somename"
Maximum = 999
Catalog = "catalog resource name"
}
Pool {
.
W dniu 16.11.2010 03:50, Dan Langille pisze:
> Here is my nagios script for verifying that my regression tests are
> showing up on the server. Feel free to use it or modify it. Keep the
> copyright notice please.
Hi,
Thanks for the script. I made a few changes. The following code should
work o
Dan Langille pisze:
> On 11/8/2010 5:18 PM, ganiuszka wrote:
>> Phil Stracchino pisze:
>>> The DVD writing code in bacula proved to be both unreliable and
>>> unmaintainable, has been deprecated in the last several major releases,
>>> and is planned to be remove
Ryan Novosielski pisze:
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> On 11/08/2010 05:18 PM, ganiuszka wrote:
>> Phil Stracchino pisze:
>>> The DVD writing code in bacula proved to be both unreliable and
>>> unmaintainable, has been deprecated in the
Phil Stracchino pisze:
> On 11/08/10 18:32, Dan Langille wrote:
>> On 11/8/2010 5:18 PM, ganiuszka wrote:
>>> Phil Stracchino pisze:
>>>> The DVD writing code in bacula proved to be both unreliable and
>>>> unmaintainable, has been deprecated in the last s
Phil Stracchino pisze:
> The DVD writing code in bacula proved to be both unreliable and
> unmaintainable, has been deprecated in the last several major releases,
> and is planned to be removed shortly.
Hi,
Where did you get this information? Is it proven message?
I use backup to DVD from long t
Hi,
When I reported a bug #1624 to the Bacula Bug Tracker I was getting word
about disabling support for DVD in a next major Bacula release.
I would asking about that. Does anyone know more about that?
In the GIT repository I did not found any commit related with this
subject yet.
Thanks for
W dniu 2010.08.18 16:25, Daniel pisze:
> Hello,
>
> I'm trying to make bacula sending email through bsmtp but I can not. Has
> anyone managed to configure this application or have another solution to
> the bacula send email to the end of a job??
>
Hi,
For example simple mail command:
MailCommand
W dniu 2010.08.18 16:57, Romer Ventura pisze:
> Hello,
>
> I am running Bacula 5.0.2 with a Quantum SuperLoader 3 with DLTv4 tape
> drive. If i want to enable hardware compression so i can use 320GB from
> my VS1 tapes all i would need to do is run this command: mt -f
> /dev/nst0 defcompression 1,
duxbuz pisze:
> Thanks.
>
> I ran the first of the debug commands
>
> u...@mypc:~/bacula/bin$ sudo ./bacula-dir -d 200 -c bacula-dir.conf
>
>
> and had this output:
>
> bacula-dir: dird.c:184-0 Debug level = 200
> bacula-dir: runscript.c:296-0 runscript: debug
> bacula-dir: runscript.c:297-0
duxbuz wrote:
> Hello, I am trying to get bacula up and running. Did all the installs, ran
> scripts for the mysql setup... all looked good.
>
> But it seems that the daemons will not start
>
Hi
You can try run Bacula daemons with -d parameter. It runs Bacula daemons
with the debug mode.
For
Thomas Mueller pisze:
> hi gani
>
> thanks, tried it, but same error:
>
> # bcopy -v -c /etc/bacula/bacula-sd.conf -i35L4 -oCOPY35L4 /dev/nst0
> /srv/FileStorage -p
> bcopy: butil.c:281 Using device: "/dev/nst0" for reading.
> 23-Apr 07:29 bcopy JobId 0: Invalid slot=0 defined in catalog
Thomas Mueller wrote:
> hi
>
> i'm failing to use the bcopy utility. I want to copy from tape to disk. i
> keeps
> telling me, that "No Volume name" is given (see log output below)
>
> somebody maybe know what's going wrong? bacula is version 5.0.1 on debian.
>
> - Thomas
>
>
> # bcopy -v -c
John Drescher wrote:
> On Wed, Apr 21, 2010 at 11:42 AM, Sergio Belkin wrote:
>> 2010/4/21 John Drescher :
Can I delete jobs with theis files besides their database records?
>
> Not if other jobs are on the same volume and you do not want to erase
> the whole volume.
This behaviour results
openit admin wrote:
> thanks for your help; ok I understand and I have changed the config.
> When I run the job I get the following:
>
> Run Copy job
> JobName: Full Backup Copy
> Bootstrap: *None*
> Client:kapital-backup-fd
> FileSet: Full Linux Set
> Pool: Full-
openit admin pisze:
> Hi,
>
> I have the followeing problem, with a copy job. I want do the following:
> the monthly full backup (to a disk pool) should be copied to tape. I do
> not know how to do this.
>
> # Full Backup Pool to disk
> Pool {
>Name = Full-Pool
>Pool Type = Backup
>
marco zanca:
>
> terryc wrote:
>> manually -> bconsole -> run -> choose appropriate job -> check parametrs
>> -> yes
>>
>
>
> Ok, but what if i can't be present all the time and do it manually?
> I need a way to automate this. It is possible to modify the number of retry?
Hi,
These three dir
Lamp Zy pisze:
> Hi,
>
> In bacula-5.0.1 if I run the bconsole command:
>"llist media pool=FullTapes"
> I'll get the extended information for all tapes in the pool.
>
> Is there a command that will give me the same information bit only for
> tapes I specifically ask for (like mediaid=4 or vo
Ismail OZATAY pisze:
> I want to use Maximum Volume Bytes option to create separate volumes but
> although I use this option it is still growing in an only one volume.
> What is wrong with my config ? Here is the latest state of the volume.
>
> [r...@mail bacula]# ll /mnt/yedek/
> total 8302597
Richard Scobie pisze:
> I have a "Client Run After Job" which runs a bash script which ends up
> writing a file on the client, "%i_%v.txt"
>
> It all works except the substitution is not occuring and it is literally
> writing the file %i_%v.txt.
>
> Is this expected?
How do you create this fi
Heitor Medrado de Faria pisze:
> ganiuszka wrote:
>> Heitor Medrado de Faria pisze:
>>>>> You should not write a ip as your client name.
>>>> Is that a problem? All my clients (Linux until now) have IP address
>>>> as name and I haven't prob
Russell Sutherland pisze:
>
> On 1-Feb-10, at 1:54 PM, ganiuszka wrote:
>
>> Russell Sutherland pisze:
>>> My autolabels just stopped working. For no apparent reason. Here's
>>> the error message:
>>> *messages
>>> 01-Feb 12:49 tank-dir
Heitor Medrado de Faria pisze:
>>> You should not write a ip as your client name.
>> Is that a problem? All my clients (Linux until now) have IP address as
>> name and I haven't problems before. Also it's not a IP address because
>> the name is "10.128.50.10-fd" this is a string to me (I don't kn
Russell Sutherland pisze:
> My autolabels just stopped working. For no apparent reason. Here's the
> error message:
>
> *messages
> 01-Feb 12:49 tank-dir JobId 21689: Start Backup JobId 21689,
> Job=madhaus-home.2010-02-01_12.49.16_07
> 01-Feb 12:49 tank-dir JobId 21689: Using Device "Tank-lar
Dan Langille pisze:
> ganiuszka wrote:
>> Dan Langille pisze:
>>> Resending with additional information
>>>
>>> ganiuszka wrote:
>>>> I used to this job next directives:
>>>>
>>>> Allow Duplicate Jobs = no
>>>> A
Dan Langille pisze:
> Resending with additional information
>
> ganiuszka wrote:
>> I used to this job next directives:
>>
>> Allow Duplicate Jobs = no
>> Allow Higher Duplicates = yes
>>
>> I ran the job, and the moment I started a job of the same n
Hi,
Now, I am testing Cancel Running Duplicates directive. I noticed a
strange behaviour also.
My Job configuration included:
Allow Duplicate Jobs = no
Allow Higher Duplicates = no
Cancel Running Duplicates = yes
First backup has been canceled, and second backup
Hi,
I am testing Duplicate Job Control. I found a few strange behaviour.
One of these is Allow Higher Duplicates.
I used to this job next directives:
Allow Duplicate Jobs = no
Allow Higher Duplicates = yes
I ran the job, and the moment I started a job of the same name b
Dirk H. Schulz pisze:
> Does Bacula call a "RunAfterJob" script with certain environment
> variables or arguments like e.g. jobid, jobname, success/failure, etc.?
Hi
Yes, there is able to define environment variables in "Run After Job"
directive, e.g.
%c = Client's name
%d = Director's name
%e
Win Htin pisze:
> What is the proper and safe way to re-assign tapes/old volumes from a
> pool which is no longer in use to back the scratch pool?
>
> Below, the pool "AllDifferentials" is no longer in use and I would
> like to re-assign the volumes "420AAL" and "421AAL" which are
> currently at V
Here is a instruction about Dell PowerVault 124T and LUNs under Linux.
http://support.dell.com/support/edocs/stor-sys/124t/en/124tvs16/install.html#enabling_lun_linux
Subject "Enabling LUN Support in Linux"
Maybe this is the solution.
Regards.
Marcin
--
View this message in context:
http://o
Grzegorz Bystrzyński wrote:
>
> Sorry, the above error line incorrect, the one below is correct:
> Cannot open file jobfiles: ERR=No such file or directory
> I was working on a couple of files with diffrent filenames and cited a
> wrong line.
>
Hi,
If you want to do restore this way, you shou
jaschu wrote:
>
> Now the question: Will old Volumes be deleted automatically, after
> VolumeRetention has passed, or will they remain on disk, in which case I
> would have to delete them manually?
>
Hi,
>From Bacula documentation about volume recycling:
"...when Bacula recycles a Volume, th
Hi,
In Bacula documentation there is a backup scheme with explanation
communications between Bacula daemons. I understand that scheme but I can't
find a restore scheme. I created this scheme and I would ask you. Is it good
reasoning? If not, please correct me.
Restore scheme is here http://www.i
Andy Watson-5 wrote:
>
> Before I got around to the btape, I was labeling barcodes and it would
> load
> and unload but not label I believe the tape/autochanger wasn't reponding
> that the tape was successfully loaded. I went into the mtx_changer script
> and changed the wait to sleep 120 and t
ganiuszka wrote:
>
> After these operations I started restoring. All were well. I started
> backup Jobs and I received a message:
>
> 31-maj 12:14 thinstar-dir JobId 12: Start Backup JobId 12,
> Job=Logowa_Praca.2009-05-31_12.13.40_04
> 31-maj 12:14 thinstar-dir J
Hi!
I have some problem with upgrade Bacula from version 1.38.11 to 3.0.1. I did
steps below:
1. I ran a few backups (Full, Incremental, Differential) by Bacula 1.38.11.
They were ok.
2. I compiled Bacula 3.0.1 as the same options as Bacula 1.38.11.
3. I upgraded Bacula.
4. I ran databas
John M. Drescher wrote:
>
> Volume retention does not start until a volume is marked Full or Used.
> Then the time of last written is used to compute the retention period.
>
I agree.
So I have one more question. In which volume states (VolStatus) a volume can
be prune in the automatic volume re
Hi!
I have some question about automatic volume recycling described in Bacula
documentation (Chapter 10).
I can't understand why a volume with VolStatus=Append may be pruned (and
later recycled) because I seems that the Volume Retention period don't begin
count down when the VolStatus is "Append
) Bacula wouldn't stop running backups with option "Max Wait Time"?
2) When a free space is running to the end and there is no another free
pool, the job would stop?
Additionally following issues have appeared after changing the version
from 1.38.11 to 2.2
Hi All,
I have an issue with performing a backup with greater amount of data.
After a while after starting backup, the job is being stopped with
status "A". I have seen that responsible for that is option "Max wait
Time". After enlarging this option to 300s I was able to backup up to
10GB amount o
Hi All,
I have an issue with performing a backup with greater amount of data.
After a while after starting backup, the job is being stopped with
status "A". I have seen that responsible for that is option "Max wait
Time". After enlarging this option to 300s I was able to backup up to
10GB amount o
Hello,
I have the following problem. I set up two storage devices (Storage1 and
Storage2) and connected tapes with them, that are connected to one (the
same pool). I'd like to achieve such functionality that when the free
space is ending on tapes on storage1, bacula automatically switches
from ta
74 matches
Mail list logo
