On Sep 5, 2010, at 11:03 PM, Richard Scobie rich...@sauce.co.nz wrote:
Unless I have missed something, it appears that if you have an
autochanger full of tapes and it becomes unavailable for whatever reason
- say the PSU fails, there is no way of accessing the tapes in another
drive, as
Dan Langille wrote:
Surely if a tape is mounted in a drive and the label is read, this
should become the new location for this tape?
Are you issuing a mount command after inserting the tape into the other drive?
Yes and when the restore job is submitted, here are the results.
Restore job,
Richard Scobie wrote:
Device status:
Device FileStorage (/mnt/exp1/bacula) is not open.
Device flash_LTO-4 (/dev/nst0) is mounted with:
Volume: AR0030L4
Pool:*unknown*
Media type: LTO-4
Total Bytes Read=2,048 Blocks Read=2 Bytes/block=1,024
Unless I have missed something, it appears that if you have an
autochanger full of tapes and it becomes unavailable for whatever reason
- say the PSU fails, there is no way of accessing the tapes in another
drive, as the system thinks are still loaded in the library and will not
allow a
