> On Mon, 06 Jun 2011 14:24:48 +0100, Alan Brown said:
>
> What kind of tape media are you using? (DDS, DAT, DLT, LTO, etc)
All but one was with DDS4 that we no longer use (yes, I know).
Some of the errors were bugs in Bacula's EOT handling though, so not directly
related to the media type.
Martin Simmons wrote:
> Yes, that's what I do, but some people claim that it wastes time and wears out
> the tape drive for no good reason. OTOH, it has detected several tape
> problems over the years I've been using Bacula.
What kind of tape media are you using? (DDS, DAT, DLT, LTO, etc)
LTOs
2011/6/2 Rickifer Barros :
> A bad backup is the same that none backup. Verifying is very important,
> nevertheless, is not 100% safe. The only and almost impracticable way would
> be often make disaster recovery simulations.
I see that some users do test restores periodically. I have done that
a
A bad backup is the same that none backup. Verifying is very important,
nevertheless, is not 100% safe. The only and almost impracticable way would
be often make disaster recovery simulations.
On Thu, Jun 2, 2011 at 11:19 AM, Martin Simmons wrote:
> > On Thu, 2 Jun 2011 10:26:44 -0300, Ricki
> On Thu, 2 Jun 2011 10:26:44 -0300, Rickifer Barros said:
>
> So, whatever how it does, I think that is a good idea set up a Verify Job
> soon after a Backup Job to ensure that data in the volume, isn't it?
Yes, that's what I do, but some people claim that it wastes time and wears out
the ta
So, whatever how it does, I think that is a good idea set up a Verify Job
soon after a Backup Job to ensure that data in the volume, isn't it?
On Thu, Jun 2, 2011 at 8:18 AM, Martin Simmons wrote:
> > On Thu, 2 Jun 2011 11:10:32 +0200, Ralf Gross said:
> >
> > I always thought that a Volume
> On Thu, 2 Jun 2011 11:10:32 +0200, Ralf Gross said:
>
> I always thought that a VolumeToCatalog job would not read the
> data written to the volume and calculate the md5sum again. Instead it
> would just read the file attributes that were written to the volume and
> compare that with the att
John Drescher schrieb:
> On Thu, Jun 2, 2011 at 5:10 AM, Ralf Gross wrote:
> > John Drescher schrieb:
> >> On Thu, Jun 2, 2011 at 4:05 AM, Ralf Gross wrote:
> >> > Rickifer Barros schrieb:
> >> >> Yes John...
> >> >>
> >> >> Now, I think that I understood perfectly and I have tested it too.
> >>
On Thu, Jun 2, 2011 at 5:20 AM, John Drescher wrote:
> On Thu, Jun 2, 2011 at 5:10 AM, Ralf Gross wrote:
>> John Drescher schrieb:
>>> On Thu, Jun 2, 2011 at 4:05 AM, Ralf Gross wrote:
>>> > Rickifer Barros schrieb:
>>> >> Yes John...
>>> >>
>>> >> Now, I think that I understood perfectly and I
On Thu, Jun 2, 2011 at 5:10 AM, Ralf Gross wrote:
> John Drescher schrieb:
>> On Thu, Jun 2, 2011 at 4:05 AM, Ralf Gross wrote:
>> > Rickifer Barros schrieb:
>> >> Yes John...
>> >>
>> >> Now, I think that I understood perfectly and I have tested it too.
>> >>
>> >> VolumeToCatalog = Compares the
John Drescher schrieb:
> On Thu, Jun 2, 2011 at 4:05 AM, Ralf Gross wrote:
> > Rickifer Barros schrieb:
> >> Yes John...
> >>
> >> Now, I think that I understood perfectly and I have tested it too.
> >>
> >> VolumeToCatalog = Compares the files in a Storage Volume with the Catalog;
> >
> >
> > Vol
On Thu, Jun 2, 2011 at 4:05 AM, Ralf Gross wrote:
> Rickifer Barros schrieb:
>> Yes John...
>>
>> Now, I think that I understood perfectly and I have tested it too.
>>
>> VolumeToCatalog = Compares the files in a Storage Volume with the Catalog;
>
>
> VolumeToCatalog does not read the file content
Rickifer Barros schrieb:
> Yes John...
>
> Now, I think that I understood perfectly and I have tested it too.
>
> VolumeToCatalog = Compares the files in a Storage Volume with the Catalog;
VolumeToCatalog does not read the file content and compares it, it just
reads the attributs and compares t
On Tue, May 31, 2011 at 11:45 PM, Rickifer Barros
wrote:
> Yes John...
>
> Now, I think that I understood perfectly and I have tested it too.
>
> VolumeToCatalog = Compares the files in a Storage Volume with the Catalog;
>
> DiskToCatalog = Compares the files of the File Deamon's File Set with
Yes John...
Now, I think that I understood perfectly and I have tested it too.
VolumeToCatalog = Compares the files in a Storage Volume with the Catalog;
DiskToCatalog = Compares the files of the File Deamon's File Set with
the Catalog;
Catalog = Like the DiskToCatalog but for
> Hi John,
>
> Well, I've tested like the way you said me and it worked.
> I used the Level DiskToCatalog cause is a Backup in Disk,
That level compares what is on your source filesystem currently with
what the MD5/SHA1 was recorded in your catalog. You wanted
"VolumeToCatalog" to compare what is
2011/5/31 Rickifer Barros :
> Hello Bacula Users,
>
> I'm trying to test the Verify Job but, how I could understand, I have to
> create another catalog just for verifications, but I'm not getting do this.
> I have installed Bacula on Debian through the aptitude with PostGre. Now I
> dont know how c
Hello Bacula Users,
I'm trying to test the Verify Job but, how I could understand, I have to
create another catalog just for verifications, but I'm not getting do this.
I have installed Bacula on Debian through the aptitude with PostGre. Now I
dont know how create this catalog. I've tried create a
18 matches
Mail list logo
