Hey Dan,
Thanks for the reply. I've read that, but it still doesn't go into a lot of
details.
Also, my experiences contradict this statement: "Without this setup
[`Device Reserve by Media Type = yes`] the AI-Consolidate job cannot
simultaneously read and write from the same pool."
We are
Tomi / Marco -
Please take a look at this thread.
https://groups.google.com/forum/#!searchin/bareos-users/cushing%7Csort:date/bareos-users/UGSb302dMqM/gwd4i7JLBAAJ
Dan
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this
Ok, the storagedameon did not start:
Director {
Name = bareos-dir
Password = "xx"
Description = "Director, who is permitted to contact this storage daemon."
SDAddresses = {
ipv6 = { addr = ::; }
}
}
So i think SDAddresses ist no right.
--
You
Ah, ok, i found the first one. Important is the identifier. Right for the
Filedaemon on the clientside is:
FD Addresses = {
ipv6 = { addr = ::; }
}
Next is the Storagedaemon. Hope i will find the right name of it.
--
You received this message because you are subscribed to the Google
Thank you Jörg,
found it and replaced it :)
Best Regards
Am Dienstag, 27. August 2019 15:33:39 UTC+2 schrieb Samuel Marischek:
>
> Hello all,
>
> we use here bareos 17.2 on UCS 4.4. At the clients (Ubuntu 18.04) we must
> enter the hostname of the bareosserver in the hostsfile. Where i can
Hello Jörg,
very thanks for your reply.
@the file /etc/bareos/bareos-dir.d/director/bareos-dir.conf this is working
fine. But @the filedaemon on the client, the service will not start anymore
after set the option . I edited the file
"/etc/bareos/bareos-fd.d/director/bareos-dir.conf" on an
Hello Jörg,
very thanks for your reply.
@the file /etc/bareos/bareos-dir.d/director/bareos-dir.conf this is working
fine. But @the filedaemon on the client, the service will not start anymore
after set the option . I edited the file
"/etc/bareos/bareos-fd.d/director/bareos-dir.conf" on an
On 27.08.19 at 15:29 wrote Samuel Marischek:
> Hello all,
>
> We use here Bareos 17.2 with UCS. The most of the servers here are IPV6
> only. So i find out that the ports on the server and client are not
> listen on ipv6. Where i can enable this?
>
> And the same @the client. We use here Ubuntu
On 27.08.19 at 15:33 wrote Samuel Marischek:
> Hello all,
>
> we use here bareos 17.2 on UCS 4.4. At the clients (Ubuntu 18.04) we
> must enter the hostname of the bareosserver in the hostsfile. Where i
> can set that the FQDN is used and not only the hostname. So for example:
>
> This entry
Hello all,
we use here bareos 17.2 on UCS 4.4. At the clients (Ubuntu 18.04) we must
enter the hostname of the bareosserver in the hostsfile. Where i can set
that the FQDN is used and not only the hostname. So for example:
This entry must exists in the /etc/hosts on every client:
bareos
Hello all,
We use here Bareos 17.2 with UCS. The most of the servers here are IPV6
only. So i find out that the ports on the server and client are not listen
on ipv6. Where i can enable this?
And the same @the client. We use here Ubuntu 18.04.
Thanks a lot :)
--
You received this message
Hi,
I'm facing to a serious issue regarding the Always Incremental backup scheme.
The goal is to use AI jobs, daily copy full+incrementals on tapes, and
consolidate disks jobs weekly
The tape copies have different retention (longer). In the documentation I found
:
"When a job is
Hi,
i am right now in a configuration phase of a Bareos system with an
Autoloader + 2 LTO-8 drives (attached over SAS,hardware compression
Enabled) using LTO-8 Type M tapes.
i made a d2d2t test using data spooling and tested the system with a backup
set of 9.7TB/778,294 files.
I am wondering
Hi,
I am right now in a configuration phase of a Bareos system with an
Autoloader + 2 LTO-8 drives (attached over SAS,hardware compression
Enabled) using LTO-8 Type M tapes.
i made a d2d2t test using data spooling and tested the system with a backup
set of 9.7TB/778,294 files.
I am wondering
14 matches
Mail list logo
