I don't know if this matters, but I have a Acer Ferrari 3400 notebook,
and according to the device list on the web site, the wireless chip
should be the following:
- chip id: 4318
- product id: 0x4318
- subsystem vendor id: 0x1468
- subsystem product id 0x0312,
but instead lspci shows me that
Note: I am not a developer, just a user with different sleeping habits,
and so responded first. Don't take the FIRST response as the BEST
response, just the first.
First, the 4306 is an older car and certainly is well supported by the
bcm43xx code, much better so than the 4318.
Second, the
Thanks for your response!
Well, I'm running Ubuntu 7.04 64-Bit version
- uname -a gives: Linux laptopandi 2.6.20-16-generic #2 SMP Thu Jun 7
19:00:28 UTC 2007 x86_64 GNU/Linux
- dmesg offers no meaningful messages ([2.262297] bcm43xx driver)
- iwconfig: eth0
IEEE 802.11b/g
Yes the difference in power calculations is eventually closer and closer
the further advanced the code becomes.
2.6.20 is definitely too old. You will either want to check out the
wireless-dev tree for newer bcm43xx code, or use a newer kernel
entirely. I posted the procedure for a new
On Sat, 07 Jul 2007 10:55:33 +0200
Andreas Peer [EMAIL PROTECTED] wrote:
- iwconfig: eth0
IEEE 802.11b/g ESSID:aj2lta1 Nickname:Broadcom 4306
Mode:Managed Frequency=2.472 GHz Access Point:
00:0F:66:D3:04:13
Bit Rate=24 Mb/s Tx-Power=15 dBm
On Saturday 07 July 2007 05:54:15 Andrew J. Barr wrote:
Hello, I am at a hotel and I am experiencing a strange issue with my
BCM4306 in my PowerBook G4--after some time the access point will
become invalid, meaning the output of iwconfig will no longer list
the MAC address of the AP and will
Ehud Gavron schrieb:
Lastly, there is a known POWER problem, which results in better
transmission if the transmission rates are reduced.
Do you mean this issue?
bcm43xx_mac80211: !WARNING! Idle-TSSI phy-cur_id
le_tssi measuring failed. (cur=0, tgt=62). Disabling TX power adjustment.
cu
Florian Erfurth wrote:
Ehud Gavron schrieb:
Lastly, there is a known POWER problem, which results in better
transmission if the transmission rates are reduced.
Do you mean this issue?
bcm43xx_mac80211: !WARNING! Idle-TSSI phy-cur_id
le_tssi measuring failed. (cur=0, tgt=62). Disabling
Message: 1
Date: Fri, 06 Jul 2007 12:53:42 -0500
From: Larry Finger [EMAIL PROTECTED]
Subject: Re: bcm4312 on again, off again
To: Brennan Ashton [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED], bcm43xx-dev@lists.berlios.de
Message-ID: [EMAIL PROTECTED]
Content-Type: text/plain;
SNIP
[EMAIL PROTECTED] ~]# uname -a
Linux localhost.localdomain 2.6.21-1.3228.fc7 #1 SMP Thu Jun 28 16:42:25
CDT 2007 i686 i686 i386 GNU/Linux
[EMAIL PROTECTED] ~]# lspci | grep Broadcom
0a:03.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN
Made a type-o
On 7/7/07, Brennan Ashton [EMAIL PROTECTED] wrote:
SNIP
[EMAIL PROTECTED] ~]# uname -a
Linux localhost.localdomain 2.6.21-1.3228.fc7 #1 SMP Thu Jun 28 16:42:25
CDT 2007 i686 i686 i386 GNU/Linux
[EMAIL PROTECTED] ~]# lspci | grep Broadcom
0a:03.0 Network controller:
On 7/6/07, jenny tc [EMAIL PROTECTED] wrote:
hai,
I,m attaching wpa_supplicant output file..pls have a look
/usr/sbin/wpa_supplicant -c wireless.conf -i eth0 -Dwext -B -dd
wpa_supplicant.output.txt
wpa_supplicant output-
-
Initializing interface
12 matches
Mail list logo