$ lsusb
Bus 001 Device 006: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B
Wireless 802.11g 54Mbps Network Adapter
It is branded as Edimax.
$ sudo iw wlan0 set power_save off
didnt work. after above command same behavior is observed.
Thanq
--
For more options, visit
Am Dienstag, 15. Oktober 2013 17:54:37 UTC+2 schrieb Billy Vultur:
Hi to all.
My current BBB Installation is running quite well with the
debian-7.1-2013-08-26.img
from Robert.
How to update to a newer image like
- BeagleBone/BeagleBone Black: v3.8.13-bone28 kernel
- 4bit
Hello Robert
thanks a lot
worked like a charm!
Am Dienstag, 15. Oktober 2013 17:54:37 UTC+2 schrieb Billy Vultur:
Hi to all.
My current BBB Installation is running quite well with the
debian-7.1-2013-08-26.img
from Robert.
How to update to a newer image like
- BeagleBone/BeagleBone
Ok, here is the draft version
https://github.com/liyaoshi/BBB_QT5_WAYLAND
hope it be useful
Regards
2013/10/14 David Lewin dlewin...@gmail.com
Interesting. I saw the commit from Yann Morin but as my experience about
Buildroot is near 0, I will bounce with your idea and will try to rebuild
On 16/10/2013, at 11:54, Andrei andrej.kondrat...@gmail.com wrote:
Hello I have run into the problem, I'm unable to SSH to the beaglebone black.
user@linux-vubj:~ ssh 192.168.7.2 -1 root
ssh: connect to host 192.168.7.2 port 22: Connection refused.
Does anybody knows how to resolve this
I have tried with the -l (L) as well, nothing changes, response is the
same.
user@linux-vubj:~ ssh 192.168.7.2 -l root
ssh: connect to host 192.168.7.2 port 22: Connection refused.
On Wednesday, October 16, 2013 1:10:32 PM UTC+2, Paulo Ferreira wrote:
On 16/10/2013, at 11:54, Andrei
Hi Mark,
Thanks for our prompt response.
Can you please share you inputs on other points (1 3) also. Apart from
this, when I was done with compilation, I just look over the different
directories generated in to setup-scripts to find out the kernel source
code. But I am not seeing the
Can anyone describe the steps to get Pwm working for servo control on the
Beaglebone black running Ubuntu 13.04? Thanks
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe
Hello.
I buy this board BBB. I want to remove all the memory that is not used by
the operating system, and simply use the scheme, such as pull legs
microprocessor and work on IAR embedded ARM. What you need to do to remove
all of the memory. I need a empty board. I want to connect via jtag and
my bad !! It should be ifconfig usb0 192.168.7.2
On Wed, Oct 16, 2013 at 7:54 AM, Furhad Jidda furhadji...@gmail.com wrote:
If you are able to communicate through serial terminal ,use ifconfig
usb0 192.168.72.1 and then try connecting via ssh again .
On Wed, Oct 16, 2013 at 7:29 AM,
Hello
I want to share the internet connection of eth0 with wlan0. (like wifi AP,
hostapd and dhcp-server already working)
I tried to use iptables for NAT.
# iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
But i get following error:
iptables v1.4.15: can't initialize iptables table `nat':
Which board did you copy?
Is your schematic correct?
Is the PCB layout correct?
Gerald
On Tue, Oct 15, 2013 at 11:15 PM, 李三思 silencl...@gmail.com wrote:
Can't input angthing after booting...
Hi,r
I have a clone beagleboard, and tried to install linux on it. But,
whatever I was installed,
Could you let everyone know which Beagleboard?
Gerald
On Wed, Oct 16, 2013 at 2:46 AM, JianguoWEI weijianguo1...@gmail.comwrote:
Hi, All,
I am trying to boot the Linux kernel 3.3.0-rc7 on Beagleboard through network
file system(NFS). I am working with this kernel version because I want to
Yes I have, and I usually find pressing the reset button and waiting a bit
makes it work. I already stared a thread a few days ago about this but so
far no good solution.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the
Well, right now all the memory is used by the operating system,.
I decided not to add memory that was not used. The eMMC can be bypassed and
only use the SD card, but that is the only option. You can remove that if
you like, But, I would leave it on and just not use it to prevent damaging
the
Yes I have, and I usually find pressing the reset button and waiting for
the board to reboot makes it work. I already stared a thread a few days ago
about this but so far no good solution. Please try that and see if you are
experiencing the same as I do
--
For more options, visit
I don't see any bugs in the bootlog
Disable HW-flow control for your RS232 connection and try again
2013/10/16 Robert Nelson robertcnel...@gmail.com
On Tue, Oct 15, 2013 at 11:15 PM, 李三思 silencl...@gmail.com wrote:
Can't input angthing after booting...
Hi,r
I have a clone beagleboard,
On Wed, Oct 16, 2013 at 5:46 AM, JianguoWEI weijianguo1...@gmail.com wrote:
Hi, All. I am trying to boot Linux mainline kernel 3.3 on BeagleBoard
through NFS. But did not work.
The idea is to work with NFS through the MOSCHIP usb-ethernet driver. As can
be seen from the booting log, it is
I wanna ask how we can create a community in specific country and how it
goes if there is a chance to create the community
thank you
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To
Which country? What name are you wanting to create it under?
Gerald
On Wed, Oct 16, 2013 at 7:59 AM, LM_Geekette geekett...@gmail.com wrote:
I wanna ask how we can create a community in specific country and how it
goes if there is a chance to create the community
thank you
--
For more
On Tuesday, October 15, 2013 11:20:24 PM UTC+1, RobertCNelson wrote:
On Tue, Oct 15, 2013 at 11:56 AM, cwrse...@gmail.com javascript:
wrote:
(This may be a duplicate post - Google Groups seems to have eaten the
first
one.)
Does anyone know the most recent version number of
Not a very good clone. The processor is missing. I assume there is more to
the schematic, maybe?
Gerald
On Wed, Oct 16, 2013 at 10:09 AM, 李三思 silencl...@gmail.com wrote:
Hi,
It's a chinese BeagleBoard clone.I didn't clone the beagleboard by myself.
I don't kown which the board cloned.And
I thought TI's Starterware at
http://software-dl.ti.com/dsps/dsps_public_sw/am_bu/starterware/02_00_01_01/index_FDS.html
was
supposed to enable you to do this.
Hope this helps,
Warren
On Wednesday, October 16, 2013 2:41:04 AM UTC-7, den2...@gmail.com wrote:
Hello.
I buy this board BBB.
I have not heard if StarterWare supports the BBB or not. It does the BBW,
but not sure about BBB.
Gerald
On Wed, Oct 16, 2013 at 12:09 PM, Warren S wschei...@gmail.com wrote:
I thought TI's Starterware at
Em sábado, 12 de outubro de 2013 07h57min27s UTC-3, diego@gmail.com
escreveu:
Folks,
I did some search on internet but I could not find anyone talking about
this.
So, I'm sorry if this was discussed before.
I've built an image with qte based on Angstrom setup-scripts
I've booted it on Buildroot. Was going to try taking the same kernel
and booting it on Angstrom as well, but haven't gotten there yet.
Build output:
https://s3.amazonaws.com/beagle/buildroot/2013-10-13-21%3A15%3A27/index.html
Source:
J.
Ok, but I did the new_device, got a directory entry for 1-0068 (my new
address), but didn't get anything I recognized as the MPU6050 driver
functions. Can you guess what caused that? Do they show up in this 1-0068
dir or somewhere else in the /sysfs? or over in /dev/i2c? If I am
successful,
All,
I have my BeagleBoneBlack with Ubunutu 12.04 armhf running kernel
3.8.13-bone28 and I'm using the board for a project to port a gnuradio
project to ARM. I'm able to get all the external dependencies for my code
installed/compiled but when compiling my code on the board it always
freezes
On Wednesday 16 Oct 2013, clarkbriggs...@gmail.com wrote:
David,
Good for you. I don't understand that connection. If I get the driver and a
DTB loaded, where will it show up? Possible answers are under bone_capmgr,
under /sys/...i2c-1, and under /dev/i2c. And do you have any reason to
Last I heard / read Gerald. It does not. This is why I was saying that I'd
expect starterware for the BBB, and the SGX driver to be released by TI
around the same time( a few months ago ) Even though they're not
technically related.
However, what I think is pure speculation, and I have no idea
Hey guys,
I had a similar scenario - I ended up writing a trivial driver with help
from the guys on #beagle
that can be found here: https://gist.github.com/17twenty/6998348
You can diff my dtsi file against that in the kernel sources to see how it
comes together.
If you are using device tree
On Wed, Oct 16, 2013 at 9:01 AM, cwrseckf...@gmail.com wrote:
On Tuesday, October 15, 2013 11:20:24 PM UTC+1, RobertCNelson wrote:
On Tue, Oct 15, 2013 at 11:56 AM, cwrse...@gmail.com wrote:
(This may be a duplicate post - Google Groups seems to have eaten the
first
one.)
Does
On Wed, Oct 16, 2013 at 1:47 PM, brandon@gmail.com wrote:
All,
I have my BeagleBoneBlack with Ubunutu 12.04 armhf running kernel
3.8.13-bone28 and I'm using the board for a project to port a gnuradio
project to ARM. I'm able to get all the external dependencies for my code
On Wed, Oct 16, 2013 at 10:09 AM, 李三思 silencl...@gmail.com wrote:
Hi,
It's a chinese BeagleBoard clone.I didn't clone the beagleboard by myself.
I don't kown which the board cloned.And HW-flow was disabled.
No matter the TFT LCD, I just want to be able to enter the username and
password by
On Wed, Oct 16, 2013 at 6:38 PM, rh_ richard_hubb...@lavabit.com wrote:
On Wed, 16 Oct 2013 17:58:58 -0500
Robert Nelson robertcnel...@gmail.com
wrote:
--8--
Usually takes a good two days, of 100% load..
Do you monitor the temperature?
With what? The on-board bandgap sensor is junk on
There is a much easier way. Do this:
Go to this URL, and select the kernel you want. 3.8.13-bone28 is the newest
3.8 but there is also some 3.12 builds for the bone but I'm using the
stable 3.8 builds.
http://rcn-ee.net/deb/precise-armhf/
Click on the 3.8.13-bone28 link and download the
*Any chance is this build script publicly available?*
No, this is a work project. I've tried both our autobuild script and
building manually with verbose on and the same problem.
It gets to:
Building CXX object
swig/gr_/CMakeFiles/_gr_xxx_swig.dir/gr_xxx_swigPYTHON_wrap.cxx.o
and after a
On Wed, Oct 16, 2013 at 6:20 PM, Nick Glynn n.s.gl...@gmail.com wrote:
Does the newest iteration have USB support as I couldn't get any peripherals
working on a previous pull of 3.12?
Well, it worked last week as of:
Depends. Which one of the four different boards are you asking about?
Gerald
On Wed, Oct 16, 2013 at 5:01 PM, Stephen Sadler ssad...@aesaustin.comwrote:
Do you have a 3D cad file for the beagle board?
** **
Stephen Sadler
Mechanical Engineering Technologist
Ascendant Engineering
Sure. But, you need to decide. Check at
http://circuitco.com/support/BeagleBoneBlack
Gerald
On Wed, Oct 16, 2013 at 6:33 PM, Phil Rosati pros...@yesco.com wrote:
I'd like a small, cheap box to run Debian. This box will run ISC's DHCP
implementation, and host a DHCP scope for a small LAN.
Yeah, lm-sensors does not work.
I have some more powerful ARM hardware on the way, but I wanted to start
this project with a free board we had lying around. If I find a fix for the
BBB I'll post it here.
-Brandon
On Wednesday, October 16, 2013 4:56:24 PM UTC-7, RobertCNelson wrote:
On Wed,
On Wed, Oct 16, 2013 at 7:07 PM, brandon@gmail.com wrote:
Yeah, lm-sensors does not work.
I have some more powerful ARM hardware on the way, but I wanted to start
this project with a free board we had lying around. If I find a fix for the
BBB I'll post it here.
Or:
Thank you very much for the info, it really helped me understand whats
going on. It looks like it would be nice to have one of those FTDI-USB
adapters.
I have another question now - what the difference between the TX/RX pins on
J1 versus all of the serial pins on P8/P9? (P9-11 UART4_RXD, P9-13
Do you mean DNS server or DNS proxy ?
If you only want to as a DNS proxy , use dnsmasq , this will include dhcp
server , and in most linux based home gateway , this is the first choice
http://thekelleys.org.uk/dnsmasq
If you want to use BIND+ DHCPD , skip this
regards
2013/10/17 Gerald Coley
Hi,
I need a chip to convert a I2C interface (BBB) to a an SPI master to
connect SPI based chips to it.
The SPI pins on my BBB are used for I2C and audio.
Is there any recommended chip for that purpose?
Thank you very much in advance for any help!
Best regards,
mcc
--
For more
On Wed, Oct 16, 2013 at 10:34 PM, 李三思 silencl...@gmail.com wrote:
e... no more schematic, the processor is omap3530.
it kinda reminds me of that devkit8000, beagleboard knock off.. Looks
like it only has OTG usb, do you have the right usb adapter/usb
hub/etc?
Regards,
--
Robert Nelson
In fact, It has no OTG usb on the board.
Because of no HDMI interface, even if it has OTG usb and I can input by
using keyboard.
I also can't see what I type in. So I have to use the serial.
在 2013年10月17日星期四UTC+8上午11时47分23秒,RobertCNelson写道:
On Wed, Oct 16, 2013 at 10:34 PM, 李三思
47 matches
Mail list logo