I've booted it on Buildroot. Was going to try taking the same kernel and booting it on Angstrom as well, but haven't gotten there yet.
Build output: https://s3.amazonaws.com/beagle/buildroot/2013-10-13-21%3A15%3A27/index.html Source: https://github.com/jadonk/buildroot/commit/5bcbc31f31a9f0b6941c522a3a50877326cb96d2 Planning on automating this as I have time. On Wed, Oct 16, 2013 at 11:40 AM, David Lambert <d...@lambsys.com> wrote: > Has anyone managed to get this kernel to work on the BBB? > > Regards, > > Dave. > > > On 13-10-12 07:43 PM, David Lambert wrote: >> >> I forgot to use earlyprintk :-[ Here is the screenlog with it enabled. >> >> On 13-10-12 04:21 PM, David Lambert wrote: >>> >>> On 13-10-11 02:51 PM, Robert Nelson wrote: >>>> >>>> >>>> ah... okay because uImage gets interesting in v3.12 >>>> >>>> make ARCH=arm LOADADDR=0x80008000 uImage >>>> >>>> Regards, >>>> >>> OK I got the kernel, modules and firmware to buid eventually (forgot >>> uboot-mkimage). >>> Commands used were: >>> >>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x80008000 >>> uImage dtbs >>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- LOADADDR=0x80008000 >>> modules >>> make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- >>> INSTALL_MOD_PATH=./tempmod LOADADDR=0x80008000 modules_install >>> >>> Now I am stuck at boot, see screenlog attached. >>> >>> >>> >>> Any ideas? >>> >>> Regards, >>> >>> Dave. >>> >>> >> > > -- > For more options, visit http://beagleboard.org/discuss > --- You received this message because you are subscribed to the Google > Groups "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/groups/opt_out. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
