[beagleboard] Re: BeagleBoard-XM support to android

On Monday, January 26, 2015 at 11:09:56 PM UTC+5:30, jainni...@gmail.com wrote: > > Hi, > > Just wanted to know whether BeagleBoard-XM can be used for Android KitKat? > Or is it only used for Android Jellybean? > If you are ok with using sw graphics, it is possible to run KitKat. I don't think t

[beagleboard] absence of bone_capemgr.9. how to configure slots ??

I am running presently 3.18.1-armv7-x2 kernel version on my beagle bone black. I want to make changes to pins and slots present in this file like for enabling I2C-0. I am unable to locate bone_capemgr.9 file in /sys/devices/bone*.* How can i do it in the absence of any such file. Please Gui

Re: [beagleboard] Physical Dimensions

Additional Pictures! #0 Top, Ethernet facing #1 Bottom #2 Top, attached to LCD expansion board https://imgur.com/a/Gepxc#0 On Tuesday, December 2, 2014 at 1:53:37 PM UTC-5, Gerald wrote: > > It is larger than the NUC, About 4.2" x 4". > > I will try and get a picture when I can. > > Gerald > >

[beagleboard] Re: HMC6343 - I2C Compass Module

Have a look at some of the code here: https://github.com/adafruit/Adafruit-Raspberry-Pi-Python-Code And this might help some too: https://github.com/adafruit/adafruit-beaglebone-io-python Here's my poor attempt for the HMC5883L: https://github.com/tdack/Adafruit-Raspberry-Pi-Python-Code/tree/H

Re: [beagleboard] Configure WiFi SSDI and password on BBB running a SoftAP

On Mon, Jan 26, 2015 at 3:05 PM, wrote: > I would like to allow someone to setup BBB on a home network using another > wireless device. The BBB would boot as an access point so that a > smartphone, tablet or PC could connect to the access point and setup the > WiFi SSID and password using a cust

[beagleboard] Configure WiFi SSDI and password on BBB running a SoftAP

I would like to allow someone to setup BBB on a home network using another wireless device. The BBB would boot as an access point so that a smartphone, tablet or PC could connect to the access point and setup the WiFi SSID and password using a custom web page. The BBB would then reboot and co

Re: [beagleboard] 2 Solid LEDs when flashing eMMC on BeagleBone Black [Video]

On Mon, Jan 26, 2015 at 2:35 PM, wrote: > I just picked up a beaglebone A6 a few days ago & I think I bricked it? I've > been messing with arduino for years. > Right out of the box all the files on the eMMC were Zero KB so basically it > had no drivers or start.htm > When I try to flash a new Ang

[beagleboard] 2 Solid LEDs when flashing eMMC on BeagleBone Black [Video]

I just picked up a beaglebone A6 a few days ago & I think I bricked it? I've been messing with arduino for years. Right out of the box all the files on the eMMC were Zero KB so basically it had no drivers or start.htm When I try to flash a new Angstrom image it processes but then stops on two so

Re: [beagleboard] USB Host mass storage device possible?

Robert, I am so sorry, the link to the Github repo was not resolving, but as I read later on in the post you moved it and posted the actual link. So, my fault and I should have read the entire thread first! All the best, Surj. On Mon, Jan 26, 2015 at 12:00 PM, Robert Nelson wrote: > On Sat, Ja

Re: [beagleboard] Re: power button won't shutdown debian kernel linux-image-3.14.29-ti-r46

On Monday, January 26, 2015 at 9:45:53 PM UTC+1, RobertCNelson wrote: > > On Mon, Jan 26, 2015 at 2:43 PM, toni incog > wrote: > > > > > > On Monday, January 26, 2015 at 7:01:06 PM UTC+1, RobertCNelson wrote: > >> > >> On Sat, Jan 24, 2015 at 11:45 AM, Robert Nelson > >> wrote: > >> > On

Re: [beagleboard] How to install Python 3.x on my Rev 'C' (running Debian) BBB?

On Mon, Jan 26, 2015 at 2:52 PM, COG wrote: > Hi Robert: Thanks for the insight, will probably wait till Jessie becomes > 'stable'. We are in freeze mode... So probally a month or two away.. But feel free to try the snapshots out: http://rcn-ee.net/rootfs/bb.org/testing/2015-01-25/lxqt-4gb/BB

Re: [beagleboard] Success using beaglebone as a product and what do you use your beaglebone for

On Thursday, August 8, 2013 at 7:43:40 AM UTC-5, mjc wrote: > > On 08/07/2013 05:02 PM, Andr� Prado wrote: > > Hello, are there any success stories of products made with a beaglebone? > > :) In which area is beaglebone being used as a product? And what do you > > use it for? > > ... > The mai

Re: [beagleboard] How to install Python 3.x on my Rev 'C' (running Debian) BBB?

Hi Robert: Thanks for the insight, will probably wait till Jessie becomes 'stable'. On Monday, January 26, 2015 at 9:46:52 AM UTC-4, RobertCNelson wrote: > > On Mon, Jan 26, 2015 at 12:34 AM, COG > > wrote: > > > > Dear Sir/Madam: > > > > I would like to install Python 3.x (preferably vers

Re: [beagleboard] How to install Python 3.x on my Rev 'C' (running Debian) BBB?

Hi Elena: Thanks for the two suggestions...the first one worked and the second one will be very helpful in the future. On Monday, January 26, 2015 at 5:13:42 AM UTC-4, Elena Grandi wrote: > > On 2015-01-25 at 22:34:37 -0800, COG wrote: > > I would like to install Python 3.x (*preferably version

Re: [beagleboard] Re: power button won't shutdown debian kernel linux-image-3.14.29-ti-r46

On Mon, Jan 26, 2015 at 2:43 PM, toni incog wrote: > > > On Monday, January 26, 2015 at 7:01:06 PM UTC+1, RobertCNelson wrote: >> >> On Sat, Jan 24, 2015 at 11:45 AM, Robert Nelson >> wrote: >> > On Sat, Jan 24, 2015 at 11:23 AM, DLF wrote: >> >> Hi, I'm running the same kernel and the power but

Re: [beagleboard] Re: power button won't shutdown debian kernel linux-image-3.14.29-ti-r46

On Monday, January 26, 2015 at 7:01:06 PM UTC+1, RobertCNelson wrote: > > On Sat, Jan 24, 2015 at 11:45 AM, Robert Nelson > wrote: > > On Sat, Jan 24, 2015 at 11:23 AM, DLF > wrote: > >> Hi, I'm running the same kernel and the power button shuts down the > BBB. I > >> have to hold it for

Re: [beagleboard] USB Host mass storage device possible?

On Sat, Jan 24, 2015 at 10:02 PM, wrote: > Hi Robert, > > I can't get that URL to resolve - can you post the updated link please? > Thanks. I'm sorry, but your subject/question doesn't seem to resolve, can you please post your actual question. Regards, -- Robert Nelson http://www.rcn-ee.com/

Re: [beagleboard] Re: Beaglebone black not detected when plugged into PC

On Sun, Jan 25, 2015 at 4:13 AM, wrote: > Hi all, > I flashed my Beaglebone Black with the latest Debian image. But when I > connect it to a PC (through USB) its not recognized. Whenever I connect it > to the PC with the MicroSD inserted inside the board, the PC recognizes it. > Please help me ou

Re: [beagleboard] Re: BBB power led blinking, revived after several power button presses

http://beagleboard.org/getting-started. I was happy to see, the programs on the website worked just fine on my board. Thus, I was able to conclude that strangely, my BBB board didn't like 5V external power source! The BeagleBone Black & BlueSteel Basic seem to be extremely sensitive to the ris

Re: [beagleboard] beagleboard xm no more available

We are shipping the xM. Gerald On Sat, Jan 24, 2015 at 12:27 PM, wrote: > The good new is: after two years we worked on a project based on > beagleboard xm, finally the product is ready to be sold. > The bed new is: BB xm is not more available all over the word. > Is there anyone who is inters

[beagleboard] Re: Unable to Connect to BBB via USB from OSX Yosemite

I too would love an answer to this issue. From what I've read the developer doesn't even know what the issue is; however it has something to do with the HornDIS rev 7 drivers or FTDI 2.2.18 packages. refer to this link http://joshuawise.com/horndis#notes_about_mavericks_and_yosemite On Monday

[beagleboard] Re: BBB embedded Linux/Qt contract developer needed

Hi Roger, I am interested in your project. I am a independent contractor based in Southern Maine. I have some github repos with some sample work, mostly proof-of-concept stuff. https://github.com/scottellis https://github.com/jumpnow Contact information can be found on my website http://www.

[beagleboard] BeagleBoard-XM support to android

Hi, Just wanted to know whether BeagleBoard-XM can be used for Android KitKat? Or is it only used for Android Jellybean? How do i know which beagleboard supports which Android version? Thanks -- For more options, visit http://beagleboard.org/discuss --- You received this message because you

[beagleboard] Re: gpio trouble

I have the same problem with P8 pins and am using the cloud 9 interface ? did you find a solution? On Friday, March 28, 2014 at 11:14:11 PM UTC+2, jaden Gani wrote: > > I will try that. I am using cloud9 when I use the sleep command. The funny > thing is that some of the pins are outputting volt

Re: [beagleboard] USB Host mass storage device possible?

Hi Robert, I can't get that URL to resolve - can you post the updated link please? Thanks. Surj. On Monday, January 6, 2014 at 5:53:14 AM UTC-8, RobertCNelson wrote: > > On Mon, Jan 6, 2014 at 1:23 AM, > > wrote: > > Hi, > > > > Would appreciate some insights into whether or not this woul

[beagleboard] Re: Beaglebone black not detected when plugged into PC

Hi all, I flashed my Beaglebone Black with the latest Debian image. But when I connect it to a PC (through USB) its not recognized. Whenever I connect it to the PC with the MicroSD inserted inside the board, the PC recognizes it. Please help me out to solve this problem. Thank you On Tuesday,

[beagleboard] Re: BBB /dev/ttyO0

I have been having the same trouble. I edited /boot/uboot/uEnv.txt and set the console to ttyO1 instead of ttyO0 and that seemed to work. Commenting out the line made no difference. Hope that helps. Thanks, Stuart On Wednesday, January 14, 2015 at 11:38:48 AM UTC-7, Enoch wrote: > > Good day

[beagleboard] beagleboard xm no more available

The good new is: after two years we worked on a project based on beagleboard xm, finally the product is ready to be sold. The bed new is: BB xm is not more available all over the word. Is there anyone who is intersted to sell us any pieces of BB xm? I accept also used boards, I will thank very m

[beagleboard] help !! P8 pins Won't work

i just got an new beagle bone Black board for like a month ago and all was working well till i tried to use pins from P8 and discovered they are not working either as input or outputs ? what should i do or check ? please keep in mind that i am a beginner and i use the Cloud 9 to write my code a

[beagleboard] Re: BBB embedded Linux/Qt contract developer needed

Hi Roger, I would be interested in talking with you about this. I have worked on a number Qt touchscreen based apps with Gumstix Overo systems, OMAP3/Cortex-A8 boards similar to the Sitara. I have experience writing device drivers. I have worked a lot with the BBBs, just never on a commercial

[beagleboard] Re: BBB power led blinking, revived after several power button presses

I had a similar problem- my power LED would just continue blinking when connected to a 5V power source. This meant there was something wrong. First, I checked if my BBB was still alive. To find that, I connected my board to a computer via USB. Surprisingly, this time power LED turned on normal

Re: [beagleboard] HDMI signal filtering on page 10 (BBB schematics)

I spent four weeks looking for one. So not that I know of or I would have used it. These guys were the only ones that would take it as far as they did. Everyone else wants and NDA to get what I got form NXP without one.. Gerald On Fri, Jan 23, 2015 at 11:27 AM, wojtekskulski via BeagleBoard < be

[beagleboard] Beaglebone & Video Webcam HP HD3200

Hi everybody, I am new with beaglebone and I am trying to connect a webcam to do image processing. I do all the steps of the Derek malloy's website( http://derekmolloy.ie/building-ffmpeg-for-beaglebone-from-source/#comment-29934) there is not something wrong in the process. But when I

[beagleboard] glebone and Webcam Hp 3200 HD

Hi everybody, I am new with beaglebone and I am trying to connect a webcam to do image processing. I do all the steps of the Derek malloy's website(http://derekmolloy.ie/building-ffmpeg-for-beaglebone-from-source/#comment-29934) there is not something wrong in the process. But when I f

Re: [beagleboard] i need help with node.js

Here's a simple tutorial, not of express, but it will get you started & you could adapt express in there pretty easily. http://isolasoftware.it/2012/04/23/beaglebone-and-websockets-a-full-example-that-turn-onoff-a-led/ On Sunday, January 25, 2015 at 7:10:31 AM UTC-6, Günter Pütz wrote: > > Many

Re: [beagleboard] Re: power button won't shutdown debian kernel linux-image-3.14.29-ti-r46

On Sat, Jan 24, 2015 at 11:45 AM, Robert Nelson wrote: > On Sat, Jan 24, 2015 at 11:23 AM, DLF wrote: >> Hi, I'm running the same kernel and the power button shuts down the BBB. I >> have to hold it for about 5 seconds, but it does work > > Actually, 5 seconds means the pmic just cycled...

[beagleboard] Re: BBB SPI: 6 cs signals needed

> > Exploring Beaglebone Chapter 8 > I can't recommend this book highly enough. There is a section in Chapter 8 which shows how to get more CS controls using the GPIOs and simple external logic. This chapter alone will make the price of the book worth

Re: [beagleboard] How to install Python 3.x on my Rev 'C' (running Debian) BBB?

On Mon, Jan 26, 2015 at 12:34 AM, COG wrote: > > Dear Sir/Madam: > > I would like to install Python 3.x (preferably version 3.4) on my BBB that > is running the Debian OS. Can anyone help? > > I tried #apt-get install python33 > But got this error: > E: Unable to locate package python33 Well "py

Re: [beagleboard] How to install Python 3.x on my Rev 'C' (running Debian) BBB?

Hi, when I see an error like that, I always *make sure my date & time are set properly* and then run apt-get update apt-get install ** I'm not at my BBB to test, so I'm not sure if this would fix your problem or not On Monday, 26 January 2015 10:13:42 UTC+1, Elena Grandi wrote: > > On 2015-01

Re: [beagleboard] How to install Python 3.x on my Rev 'C' (running Debian) BBB?

On 2015-01-25 at 22:34:37 -0800, COG wrote: > I would like to install Python 3.x (*preferably version 3.4*) on my BBB > that is running the Debian OS. Can anyone help? > > I tried #apt-get install python33 > But got this error: > E: Unable to locate package python33 did you try: # apt-get