So, I finally got around to installing
BBB-eMMC-flasher-debian-8.0-console-armhf-2015-05-31-2gb.img on my BBB. I have
the CircuitCo WL1835MOD cape. Can I enable it with some capemgr commands? Or do
I need to modify the DTBs? I see there's some wlan support in
/boot/dtbs/3.14.43-ti-r66 (e.g. am3
P.S. It just happened again - so this time I connected the serial debug cable.
Indeed I seem to have installed the "uboot" workaround wrongly - I get a
"U-Boot#" shell prompt. If I type "boot" the board starts up.
--
For more options, visit http://beagleboard.org/discuss
---
You received this
Hi guys,
I am facing the same problem (power LED on, user LED off and board not booting).
It only happens occasionally. I wrote a script that reboots the board every 60s
(using "shutdown -r now") to reproduce.
I then installed the "MLO" and "u-boot.img" files that are available in
"https://www
Thanks, One more thing that I would like to know is that if I combine 2x
input from the BBB Audio Cape and 2x input from Sound card via USB. Do you
think it would work just as fine or there could be some synchronization
issues ?
On Saturday, May 30, 2015 at 6:05:35 AM UTC+2, Walter Schilling
Hi
I am using a BBB [Debian based]. For the project use, this has been changed
to Angstrom. I have found a couple of issues with the BBB at random times
like say once in 100 timesor so where it does not boot up.
The issues are as below where,
two times the BB LED Power was on but the USR
Hi everybody!
I'm using a cross-compilation (host: Ubuntu 14.04, OpenCV 2.4.11, Qt 4.8)
to execute some code on my BBB (Angstrom, OpenCV 2.4.2, Qt 4.8)
Everything is just fine, my programs run on my host machine and on the BBB.
I must now plug a webcam (a cheap Logitech one) and take a single p
Hello! I have BBB that I've somehow hosed the permissions on my home
directory, so I can no longer log into it - when trying to ssh I'm getting
a permission denied. This is an element14 unit with whatever Debian
version that came with it installed. I (unwisely) never created another
user account
On Wed, Jun 3, 2015 at 1:54 AM, Micka wrote:
> Ok, that works, the BBB clone boot.
>
> I would like to add devices on the BBB, but i don't think that using the
> capemanager would be a great idea ( i saw the capemanager in the device tree
> from the kernel 4.1 source file : am335x-bone-common.dtsi
On Wed, Jun 3, 2015 at 8:51 AM, Scott Evans wrote:
> Hello! I have BBB that I've somehow hosed the permissions on my home
> directory, so I can no longer log into it - when trying to ssh I'm getting a
> permission denied. This is an element14 unit with whatever Debian version
> that came with it
On Wed, Jun 3, 2015 at 3:12 AM, Rick Mann wrote:
> So, I finally got around to installing
> BBB-eMMC-flasher-debian-8.0-console-armhf-2015-05-31-2gb.img on my BBB. I
> have the CircuitCo WL1835MOD cape. Can I enable it with some capemgr
> commands? Or do I need to modify the DTBs? I see there's
These sound like classic power issues with the BBB.
Power it from something with good clean sufficient power available.
--- Graham
==
On Wednesday, June 3, 2015 at 8:27:37 AM UTC-5, mailsh...@gmail.com wrote:
>
> Hi
>
> I am using a BBB [Debian based]. For the project use, this has been
> change
Hi Robert,
Thanks! Fast response.
It's mean I need using gnueabihf toolchain for recompile QT Lib?
I will try it!
RobertCNelson於 2015年5月29日星期五 UTC+8下午11時58分01秒寫道:
>
> On Fri, May 29, 2015 at 10:49 AM, Ken >
> wrote:
> > Hi,
> >
> > I want using QT Creator develop over remote.
> >
> > My de
The BBB acquires IP address 192.168.7.2 on the USB port.
This does not give it access to my router and the internet at 192.168.1.1.
I'd like to assign a different IP address to the USB port.
But when I change the file etc/network/interfaces the change is not honored
and it comes up 192.168.7.2
On Wed, Jun 3, 2015 at 10:52 AM, wrote:
> The BBB acquires IP address 192.168.7.2 on the USB port.
> This does not give it access to my router and the internet at 192.168.1.1.
> I'd like to assign a different IP address to the USB port.
> But when I change the file etc/network/interfaces the chan
The content moved to http://fatcatlab.com/evb.
He's also setup a purchase page now.
On Wed, Jun 3, 2015 at 10:06 AM, Mark A. Yoder
wrote:
> Jason just sent me an EVB and I'm ready to play with it. Last night
> http://www.fatcatlab.com/242-2 pointed to setup instructions, but today I
> get a 4
Do you have a line dtb=am335x-boneblack-can1.dtb in uEnv.txt?
That was a problem for me, I am working on a project with almost the same
setup.
Aaron
On Monday, June 1, 2015 at 3:00:50 PM UTC-4, Bruno Luiz wrote:
>
> I am working with a BeagleBone Black rev C for a project using CAN. I am
> us
Found it. Thanks…
--Mark
From: jkrid...@gmail.com [mailto:jkrid...@gmail.com] On Behalf Of Jason Kridner
Sent: Wednesday, June 03, 2015 12:58 PM
To: Mark A. Yoder
Cc: beagleboard@googlegroups.com; Jan Szymanski
Subject: Re: [beagleboard] Anyone interested in LEGO EV3? I'm trying to
transplant
Thank you for your answers.
Actually, I'm already using a tool-chain successfully on my second laptop
which runs on Linux, but wanted to do the same on my main laptop which is a
MacBook.
If BeagleBoard doesn't provide any official tool-chain, is there a
repository where I can find them? Addit
We are dealing with the same issue - we found another complaint of the same
thing, in which the user identifies phantom characters on the UART during
startup causing the board to go into u-boot. If you don't have a display
attached or a serial connection available, u-boot looks a lot like a sol
lol because macs are for the"other" people.
i shunned anything apple from the early 80s when they
refused to open up hardware and software and kept it all closed.
all for the the user experience. not for the tinkerer
On 6/3/2015 12:02 PM, 'Rei Vilo' via BeagleBoard wrote:
> Thank you for your
With that dtb I get the same result. But the eMMC is disabled as you
said. Therefore I think I used basically the right dtb.
Here is the complete bootlog: http://paste.ubuntu.com/11548969/
Do you have an idea?
--
For more options, visit http://beagleboard.org/discuss
---
You received this messa
On Wed, Jun 3, 2015 at 2:41 PM, Matthias Klein wrote:
> With that dtb I get the same result. But the eMMC is disabled as you
> said. Therefore I think I used basically the right dtb.
> Here is the complete bootlog: http://paste.ubuntu.com/11548969/
>
> Do you have an idea?
root=/dev/nfs nfsroot=1
It's a bird... it's a plane... it's the FBI! ;)
Check out the BeagleBone Black and Software Defined Radio in this story:
"Tracking FBI aerial surveillance"
https://storify.com/jjwiseman/tracking-fbi-aerial-surveillance
cheers,
drew
--
For more options, visit http://beagleboard.org/discuss
---
All interested in http://campaign.circuithub.com/beaglebone-gamingcape,
I'm trying to make sure the kernel and software image are suitable for
giving the green light to CircuitHub to start shipping the Gaming
Capes. I wanted to give people a chance to give some feedback on what
ideally should be
Nice catch!
On Wed, Jun 3, 2015 at 4:00 PM, Drew Fustini wrote:
> It's a bird... it's a plane... it's the FBI! ;)
>
> Check out the BeagleBone Black and Software Defined Radio in this story:
>
> "Tracking FBI aerial surveillance"
> https://storify.com/jjwiseman/tracking-fbi-aerial-surveillance
>
On Wed, Jun 3, 2015 at 6:16 PM, Jason Kridner wrote:
> All interested in http://campaign.circuithub.com/beaglebone-gamingcape,
>
> I'm trying to make sure the kernel and software image are suitable for
> giving the green light to CircuitHub to start shipping the Gaming
> Capes. I wanted to give p
That shouldnt apply to the logic supply serial cape. It has an eeprom, and
uses a different device tree blob. Which is included with every beagleboard
debian image I've tested so far . . .
On Wed, Jun 3, 2015 at 10:48 AM, Aaron Clarke wrote:
> Do you have a line dtb=am335x-boneblack-can1.dtb in
Or you *could* log in as root . . .
#
*chown debian:users /home/debian*
Then see if that works. If not, you can always backup the directory, remove
the debian user, then recreate the debian user, and home directory.
Something like this is a good reference for adding a new user.
https://www.debia
Hi Chris,
Thanks a lot for you response. I would have hoped for the software solution to
work - I also tested copying u-boot.img and MLO to /boot/uboot but I still get
the dreaded u-boot prompt.
I now hardwired the Rx line to +3.3V because I don't require u-boot anyway. I
can still listen to t
Just got my brand new kit and got it up, updated to the latest Debian 7.8
everything seemed to run fine, the Ethernet connection works good. Now came
the time to see if I could boot the board on my new 5V power supply. That
didn't go well. The leds came on, then off then on then off every 30
I see this all the time.
Your power supply does not provide enough current to run the board or it is
not regulated and is causing an over voltage condition that causes the PMIC
to shutdown.
Gerald
On Wed, Jun 3, 2015 at 9:06 PM, wrote:
> Just got my brand new kit and got it up, updated to the
How many amps are the PSUs your using?
On Jun 3, 2015 7:16 PM, wrote:
> Just got my brand new kit and got it up, updated to the latest Debian 7.8
> everything seemed to run fine, the Ethernet connection works good. Now came
> the time to see if I could boot the board on my new 5V power supply. T
give us the specs of the PS
On 6/3/2015 7:06 PM, rrpou...@gmail.com wrote:
> Just got my brand new kit and got it up, updated to the latest Debian
> 7.8 everything seemed to run fine, the Ethernet connection works good.
> Now came the time to see if I could boot the board on my new 5V power
> s
use function in examples provided in the package
prussdrv_exec_program (PRU_NUM, "./text.bin");
PRU_NUM is defined as 0 in the example, you can use other notation to
define both pru0 and pru1
#define PRU_NUM0 0
#define PRU_NUM1 1
.
.
prussdrv_exec_program (PRU_NU
34 matches
Mail list logo