Just to let you know that my test of 13 BBB is still available
Here my results of of 3 days + 12h testing:
bba94e: 13 reboots
bbf611: 9 reboots
bb4f8e: 12 reboots
bb5d63: 12 reboots
bbea75: 14 reboots
bb845a: 12 reboots
bb93dc: 10 reboots
bbde13: 6 reboots
bb5a40: 13 reboots
bb6c1f: 14 reboots
bb
Sorry, I did not recognize that there are two more BB-White on my table:
root@bb5435:~# cat /proc/device-tree/model
TI AM335x BeagleBone
root@bb5435:~# uname -a
Linux bb5435 4.1.0-rc8-bone9 #1 Wed Jun 17 00:05:43 UTC 2015 armv7l
GNU/Linux
root@bb5435:~# uptime
07:57:01 up 7 days, 12:42, 2 users
Robert Nelson wrote:
> Please upgrade to :
>
> sudo apt-get update
> sudo apt-get install linux-image-4.1.2-ti-r4
> sudo reboot
>
> Still tracking the random reset down.
New kernel installed and running. Will report back in a day or two.
Cheers,
Erik
--
Erik de Castro Lopo
--
For more opti
Max wrote:
> Can you ground the Vusb line? The same problem was with 3.2
Are you referring to this?
https://groups.google.com/forum/#!msg/beagleboard/xPxzYyNsA78/XllFv6ZHUWIJ
Cheers,
Erik
--
Erik de Castro Lopo
--
For more options, visit http://beagleboard.org/discuss
---
You received this
Probably yes. Anyway my boards had Vbus grounded and customers never
complained
18 Июл 2015 г. 12:36 пользователь "Erik de Castro Lopo" <
mle+...@mega-nerd.com> написал:
> Max wrote:
>
> > Can you ground the Vusb line? The same problem was with 3.2
>
> Are you referring to this?
>
> https://groups
It should not get damaged because PMIC should handle voltage up to 20V as
written in its manual.
16 Июл 2015 г. 17:30 пользователь "Gerald Coley"
написал:
> Not knowing what is damaged, I would say replace the processor. If the LED
> is flashing that usually means the PMIC is OK, but not having i
TI should not qualify own products for medical applications, an end-user
should. For example TI makes chips for ECG, but it does not mean that you
build your own ECG machine and it should be automatically approved by any
medical organization. A manufacturer of this product should pass all tests
and
I finally installed CCS6 and use USB100v2 JTAG interface (after soldering
the header into BBB pads).
It looks like as I2C1 module never goes out of reset status: RDONE flag
into I2C_SYSS register is always 0 even after writing I2C_EN=1 into I2C_CON
register (and also, SRST=0 into register I2C_S
Maxim Podbereznyy wrote:
> Probably yes. Anyway my boards had Vbus grounded and customers never
> complained
How can I test if Vbus is grounded on my board? If its not, is that a
modification I can do? Is it documented somewhere? I've googled but not
been able to find anything.
Cheers,
Erik
--
Erik de Castro Lopo wrote:
> New kernel installed and running. Will report back in a day or two.
With kernel linux-image-4.1.2-ti-r4 it rebooted after about 10 hours
of uptime.
Erik
--
Erik de Castro Lopo
--
For more options, visit http://beagleboard.org/discuss
---
You received this messag
Chris Shearer Cooper wrote:
> Do any of the Beagle Boards, or any other single-board computer for that
> matter, come in any kind of industry standard form factor?
The Linaro consortium is in the process of putting together a number of
standards of like this. See:
https://www.96boards.org/
You all read the "BBB intermittently rebooting" post ? Maxim was saying a
similar problem was happening to some with the 3.2 kernel. Then grounding
vbus or vUSB made the problem go away.
Not sure if this will fix it for all of you, but I can say that I am
powering via USB, and have had zero proble
>
> *TI should not qualify own products for medical applications, an end-user
> should. For example TI makes chips for ECG, but it does not mean that you
> build your own ECG machine and it should be automatically approved by any
> medical organization. A manufacturer of this product should pass al
For what it is worth...
I loaded the console version
"bone-debian-8.1-console-armhf-2015-07-12-2gb.img" onto a uSD card.
Then booted and installed "linux-image-4.1.2-ti-r4"
Then rebooted, and let it run doing nothing else.
It autonomously rebooted after seven hours.
--- Graham
==
--
For more
powered how
On 7/18/2015 5:14 PM, Graham wrote:
> For what it is worth...
>
> I loaded the console version
> "bone-debian-8.1-console-armhf-2015-07-12-2gb.img" onto a uSD card.
> Then booted and installed "linux-image-4.1.2-ti-r4"
>
> Then rebooted, and let it run doing nothing else.
> It autonom
As written in the manual the 5V switch for the USB host port power will
not. The board will be damaged.
Gerald
On Sat, Jul 18, 2015 at 2:24 PM, Maxim Podbereznyy
wrote:
> It should not get damaged because PMIC should handle voltage up to 20V as
> written in its manual.
> 16 Июл 2015 г. 17:30 п
change every error you have found in i2c.coffee,like readByte,readBytes
etc...
在 2014年12月13日星期六 UTC+8上午6:34:13，jamil...@gmail.com写道：
>
> I'm running the test.js , a simple script to obtain raw data from the
> sensor on BBB rev C with debian, it happens to print out the output
> however, there
Hello Yves,
It is nice to know that it is really possible to make this setup work. I
have struggled with this quite some time without success. My BBB runs
Ubuntu 12.04 and CUPS 1.5.3 and I can log into its web site and add
printers and printer drivers. All is fine - but - I just cannot print.
P
Gerald: I have 2 BBBs that will give a single brief flash of the power LED
when the power button is pushed, as described by others. It will not
sustain the power LED on nor boot up. When I power it from the barrel
connector (Adafruit regulated 5v power source / AC to DC 5v 2A) while on a
digita
I now have 4 damaged or dead BBBs. On this last board (Element 14), I had
only a stepper motor driver board connected (Pololu DRV8834), and nothing
else. The DRV8834 was initially drawing power from the VDD5v on the BBB.
The BBB "blacked out" twice while nothing was happening and while connected
I power off the 5Volt power connector.
The only other connection to the unit is Ethernet cable.
--- Graham
==
On Sat, Jul 18, 2015 at 7:21 PM, evilwulfie wrote:
> powered how
>
>
> On 7/18/2015 5:14 PM, Graham wrote:
>
> For what it is worth...
>
> I loaded the console version
> "bone-debian-8
If you do not use it properly, it will be damaged. That applies to every
electronic circuit ever designed. I would have stopped using the circuitry
after the second try.
I would be happy to look at your circuit and see if I can identify what the
issue might be.
Gerald
On Fri, Jul 17, 2015 at 10
Also on the barrel jack.
For what is worth I believe the OMAP and PMIC reset reason registers should
be part of the boot log so future reboot problems can be sorted.
Nuno
On Sunday, July 19, 2015 at 1:28:48 AM UTC+1, Graham wrote:
>
> I power off the 5Volt power connector.
> The only other con
My friend powers his from USB and all is fine.
sounds like its related to the Vusb line issue posted here recently
On 7/18/2015 5:34 PM, Nuno Gonçalves wrote:
> Also on the barrel jack.
>
> For what is worth I believe the OMAP and PMIC reset reason registers
> should be part of the boot log so fu
@kantonus
I must admit, I have never attempted to set this up myself. But I do have
lots of experience with Samba. The symptom you describe above sounds like a
very likely samba misconfiguration. But again . . . I've no hands on with
your situation . . .
On Sat, Jul 18, 2015 at 6:51 AM, wrote:
What version Debian, and which version kernel is your friend running?
On Sat, Jul 18, 2015 at 7:46 PM, evilwulfie wrote:
> My friend powers his from USB and all is fine.
> sounds like its related to the Vusb line issue posted here recently
>
>
>
> On 7/18/2015 5:34 PM, Nuno Gonçalves wrote:
>
>
william hermans posts
same one your using if i read correctly
i had it running on one powered by a wallwart-USB power supply and no
issues as well
but its been off for a while as i am not currently using it
On 7/18/2015 8:35 PM, Graham Haddock wrote:
> What version Debian, and which version ker
HIs friend is me ;)
debian@beaglebone:~$ uname -a
Linux beaglebone 4.1.2-ti-r3 #1 SMP PREEMPT Tue Jul 14 06:54:47 UTC 2015
armv7l GNU/Linux
debian@beaglebone:~$ cat /etc/dogtag
BeagleBoard.org Debian Image 2015-03-01
debian@beaglebone:~$ uptime
20:42:18 up 4 days, 6:43, 1 user, load average: 0
The rootfs is Wheezy 7.8 for what that's worth. But Robert already said
that shouldn't matter.
On Sat, Jul 18, 2015 at 8:42 PM, evilwulfie wrote:
> william hermans posts
>
> same one your using if i read correctly
>
> i had it running on one powered by a wallwart-USB power supply and no
> issue
grrr, and as usual . . . I keep forgetting to comment on stuff I've been
thinking about all day, in one post :/
My "concerns" about systemd are long gone now. Every one of these
linux-images I've run have booted up, and stayed using systemd.
On Sat, Jul 18, 2015 at 8:43 PM, William Hermans wrote
It is NOT grounded by default otherwise you would not be able to power the
board from USB. I don't know how you can ground the Vbus line. I would take
a soldering station (I have two) and put a simple short from the Vbus pin
at a USB connector to the ground.
OR you can power the board from USB and
I recently dusted off my Beaglebone black which I purchased back in 2013
for a project at our makerspace. After considerable difficulty trying to
connect to wifi I decided it might be prudent to upgrade to one of the
latest firmware images.
So I loaded the 2015-3-1 Debian image onto an SD card
Maxim Podbereznyy wrote:
> OR you can power the board from USB and ensure that no random reboots
> occur. The problem appear when Vbus line is floating
Ah, thank you. That's what I needed to know. Going to look into supplying
power over USB (only).
Thanks,
Erik
--
Erik de Castro Lopo
--
For
33 matches
Mail list logo
