I am really new in this.
I trying to configure Qt to use with the Beaglebone by Cross-compile
I followed some step from several tutorials, but some links are down or are
so old, and I get some errors.
I want to compile QT 5.8 because I need to use the Modbus library, But I
dont know how to start
There are several BGA (ball grid array) parts on that board.
BGA parts are much more difficult to solder than parts with leads.
If you do not have experience with BGA parts, you need to find someone with
both the experience and the equipment to do that class of soldering.
--- Graham
==
On Tuesda
Sorry, I don't know how to do that under Android. I think /boot/uEnv.txt
is unique to the Beagle.
--Mark
On Thursday, April 6, 2017 at 1:52:10 AM UTC-4, Sujit Singh wrote:
>
> Thanks Sir, Do you have any idea about the same in an android OS, as I am
> unable to locate */boot/uEnv.txt from my a
*https://github.com/beagleboard/beaglebone-blue/wiki/Accessories*!
On Tuesday, April 11, 2017 at 3:18:53 PM UTC-5, Mala Dies wrote:
>
> Hello,
>
> I was just out there wondering one day what type of Terminals are located
> on the BBBL. So, what type of terminals are located on this thing?
>
> I s
Hello,
I was just out there wondering one day what type of Terminals are located
on the BBBL. So, what type of terminals are located on this thing?
I see there is a battery, LiPo input section and some servo connectors. I
see a bunch of what look like Grove terminals on this thing. What are the
Hello...I figured I could do some damage to the software but nope. I just
changed the 0.0.0.0:81 host:port values and BAM, it worked.
With Flask, use your BBB SSH sign in credentials (IP address) for the host
and use port 5000. This should work universally with older model books that
want to us
Thank you a lot!
Do you have any suggestions or tips for someone who is trying to build the
board?
Thank you again,
Rocco
--
Rocco Galati
Sent with Airmail
On 11 aprile 2017 a 15:47:05, Robert Nelson (robertcnel...@gmail.com)
scritto:
On Mon, Apr 10, 2017 at 2:40 PM, Rocco Galati
wrote:
> H
On Mon, Apr 10, 2017 at 2:40 PM, Rocco Galati wrote:
> Hi to all,
>
> this is my first topic in this group, I hope you can help me! :)
>
> I'm trying to build the BBB Wireless starting from the EAGLE files, I've
> seen that it is possible to find almost all the components on website like
> digi-ke
So far we have 2 workarounds that seem effective...
1) Connect a GPIO pin to the SYS_RESETN pin (P9-10). Make sure the GPIO pin
in set to be an input only with pull-up at boot time in the DT. After boot,
have a script or service grep dmseg for the telltail `detected phy mask
*fffb'
*messag
Hi to all,
this is my first topic in this group, I hope you can help me! :)
I'm trying to build the BBB Wireless starting from the EAGLE files, I've
seen that it is possible to find almost all the components on website like
digi-key and similar. I already realized different board in past both i
Hi Robert C Nelson,
Thank You for the reply and guidance,
I will do the same.
Thanks & Regards,
Sajeevan.K
On Saturday, April 8, 2017 at 5:44:08 PM UTC+5:30, RobertCNelson wrote:
>
> On Sat, Apr 8, 2017 at 2:22 AM, sajeevan k > wrote:
> >
> > Hi ,
> >
> > This is my first work with Beaglebo
I know is a problem that I have on BeagleCore, not BeagleBone, but since
the boards are kind of similar, I would be very thankful to anyone who can
help me.
I'm using a Debian Wheezy 7.11 image (https://beagleboard.org/latest-images)
with
Kernel 3.13.11-bone12.
The problem is the board is not
12 matches
Mail list logo
