[beagleboard] TMP36 and Software and The Info. Was Correct/Seth

Hello, This is the print or reading from the software I produced from the book. It works. I tried a BBB with Grove Cape and it shut the board down and would n

Re: [beagleboard] BEAGLEBONE BLACK NOT ACCESSIBLE

No, i think you have misunderstood me. I meant i installed the udev rules that already existed onboard the beaglebone black in the "drivers" folder. The beaglebone also did not work before i did this. Regardless, i have solved this problem. The builtin network manager in Ubuntu was giving me tr

Re: [beagleboard] BEAGLEBONE BLACK NOT ACCESSIBLE

On Sat, Jul 15, 2017 at 2:36 AM, Aditya Rajendran wrote: > Hello all > I just purchased a beaglebone black RevC with 4gb eMMC onboard. I've > connected it via RJ45 and usb host port to my pc. Copied the onboard > mkudevrule.sh script onto my desktop and used "chmod +x" and then > "./mkudevrule.sh"

Re: [beagleboard] could not insert 'g_ether': No such device

On Sat, Jul 15, 2017 at 7:45 PM, Igor Jędrzejczak wrote: > @Robert - I did everything as you described here: > https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-usbgadget > > Why do I have two USB interfaces showing up (USB0 and USB1)? If I cannot > load g_ether because u_ethe

Re: [beagleboard] could not insert 'g_ether': No such device

@Robert - I did everything as you described here: https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-usbgadget Why do I have two USB interfaces showing up (USB0 and USB1)? If I cannot load g_ether because u_ether is already loaded, do I need to run beaglebone-black-g-ether-

[beagleboard] BEAGLEBONE BLACK NOT ACCESSIBLE

Hello all I just purchased a beaglebone black RevC with 4gb eMMC onboard. I've connected it via RJ45 and usb host port to my pc. Copied the onboard mkudevrule.sh script onto my desktop and used "chmod +x" and then "./mkudevrule.sh". Tried to access the board with "192.168.7.2" and "192.168.6.2"

Re: [beagleboard] could not insert 'g_ether': No such device

Thanks for this solution - after running *dhclient eth1 *that interface got a proper IP address and I was able to connect through ssh with BBB. I don't consider this a final solution though, as this involves too much uncertainity and manual work in order to simply connect with the device (espec

Re: [beagleboard] could not insert 'g_ether': No such device

Yeah your right for Ubuntu.. Try sudo dhclient eth1 To see if you can get a proper ip from the beagle. Regards, On Jul 15, 2017 6:17 PM, "Igor Jędrzejczak" wrote: > As I manetioned above - I've got Ubuntu image, not debian. > > Command ubuntu@192.168.7.2 returns "*No route to host*" > > *ifc

Re: [beagleboard] could not insert 'g_ether': No such device

As I manetioned above - I've got Ubuntu image, not debian. Command ubuntu@192.168.7.2 returns "*No route to host*" *ifconfig -a* eth0 Link encap:Ethernet HWaddr d4:be:d9:62:dc:b3 inet6 addr: fe80::d6be:d9ff:fe62:dcb3/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Met

Re: [beagleboard] could not insert 'g_ether': No such device

ssh debian@192.168.7.2 If that doesn't work.. sudo ifconfig -a Regards, On Jul 15, 2017 5:28 PM, "Igor Jędrzejczak" wrote: > Why isn't this connection working then? Network manager in my host Ubuntu > shows it's still connecting. On the list of connections I already have my > BBB, I can ping

Re: [beagleboard] could not insert 'g_ether': No such device

Why isn't this connection working then? Network manager in my host Ubuntu shows it's still connecting. On the list of connections I already have my BBB, I can ping it, but when i try to ssh to it, I get no route to host error... Here is an image of my networks list: http://imgur.com/a/GUQck Re

Re: [beagleboard] could not insert 'g_ether': No such device

On Sat, Jul 15, 2017 at 3:37 PM, Igor Jędrzejczak wrote: > > Hi, > > I'm trying to make Ubuntu 16.04.2 with TI v4.4.x: Real-Time kernel work. I'm > stuck with a problem to configure ethernet over USB. I'm doing everything as > explained here: > https://eewiki.net/display/linuxonarm/BeagleBone+Blac

[beagleboard] could not insert 'g_ether': No such device

Hi, I'm trying to make Ubuntu 16.04.2 with TI v4.4.x: Real-Time kernel work. I'm stuck with a problem to configure ethernet over USB. I'm doing everything as explained here: https://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-usbgadget but when I run the beaglebone-black-g

[beagleboard] Re: Reading BBB ADC's using QNX

Sent you email with the files. On Friday, July 14, 2017 at 1:20:54 PM UTC-6, set...@gmx.de wrote: > > Hey Acheesehead, > > funny name :) I'm sitting here with the same problem and want to use the > adc of beaglebone black with qnx. But i cant figure out how it will work. > Can help me? I read y