Re: [beagleboard] Questions on Image Builder

2017-10-04 Thread Robert Nelson
On Wed, Oct 4, 2017 at 6:48 PM, Jeff Andich wrote: > Hi, > > I had a hard time finding a Debian Jessie console image (.img file) for both > BB-X15 and BBB. I eventually found that here, > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Build_Instructions/ > ,

[beagleboard] Questions on Image Builder

2017-10-04 Thread Jeff Andich
Hi, I had a hard time finding a Debian Jessie console image (.img file) for both BB-X15 and BBB. I eventually found that here, https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Debian_Build_Instructions/ , but it seemed like LXQT images were more readily available. But if we needed a

[beagleboard] Installing Basic Vision With A USB Webcam

2017-10-04 Thread Timothy Litvin
Building a custom mobile robotics platform, I’ve been monkeying with Linux, BeagleBone Blue and ArduPlane and Mission Planner for a few months. Communicating via wifi. It’s been a rutted road, but I’ve gotten that portion to work. I was greatly relieved to find a well-written beginner’s

[beagleboard] v4.14.x-ti changes

2017-10-04 Thread Robert Nelson
Okay, let's see if i can keep this thread updated: (i know i failed with the v4.9.x-ti/v4.4.x-ti changes thread) 4.14.0-rc3-ti-r1 * U-Boot Overlays Assumed... * Kernel Overlays can be "enabled" to "help" transition you to U-Boot Overlays... Currently "tested" boards: (*aka i've been booting them

Re: [beagleboard] Pocket Beagle SPI1 ChipSelect on silkscreen is not CS0 but CS1

2017-10-04 Thread Robert Nelson
On Wed, Oct 4, 2017 at 1:28 AM, Henner Zeller wrote: > Hi, > Little heads-up: I just spent an hour or so to realize that the simple 'CS' > (ChipSelect) printed on the silkscreen for SPI1 bus on the PocketBeagle is > not CS0 as I expected, but CS1. So this is actually bus

RE: [beagleboard] x15 expansion connectors

2017-10-04 Thread Gerald Coley
I have of these already designed, but I don't have the time to get these into production at the moment. Gerald From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Jeff Andich Sent: Wednesday, October 4, 2017 8:51 AM To: BeagleBoard

Re: [beagleboard] x15 expansion connectors

2017-10-04 Thread Jeff Andich
Is there maybe any discussion on making a commercially-available breakout board for the X15's expansion header connectors? So maybe the mating Hirose connector plugs into 1/4 expansion headers on the BB-X15 and attaches to a breadboard through a short ribbon cable? Just curious.. Thanks in

Re: [beagleboard] Beaglebone Green Booting Issue

2017-10-04 Thread Robert Nelson
On Wed, Oct 4, 2017 at 5:06 AM, wrote: > Hello all, > I am struggling with booting the beaglebone green from sd card. When beagle > bone connected with custom carrier board then sysboot[15:14] state is 00b > due to carrier board connections. There is no issue when

Re: [beagleboard] SSH password error

2017-10-04 Thread Chad Baker
Did you try logging in as debian with password temppwd? Chad On 10/4/17 6:17 AM, sreeram.hrith...@gmail.com wrote: Unable to SSH into BB Blue. Receiving

[beagleboard] SSH password error

2017-10-04 Thread sreeram . hrithwik
Unable to SSH into BB Blue. Receiving password error. Please help. -- For more options, visit http://beagleboard.org/discuss --- You received this message

[beagleboard] Beaglebone Green Booting Issue

2017-10-04 Thread vishnu . kn
Hello all, I am struggling with booting the beaglebone green from sd card. When beagle bone connected with custom carrier board then sysboot[15:14] state is 00b due to carrier board connections. There is no issue when booting from emmc. MMC Clock frequency for different sysboot[15:14] are shown

[beagleboard] Pocket Beagle SPI1 ChipSelect on silkscreen is not CS0 but CS1

2017-10-04 Thread Henner Zeller
Hi, Little heads-up: I just spent an hour or so to realize that the simple 'CS' (ChipSelect) printed on the silkscreen for SPI1 bus on the PocketBeagle is not CS0 as I expected, but CS1. So this is actually bus /dev/spidev2.1 Not sure if this was intended, but if it is, it should probably be

[beagleboard] Re: sytemctl not working Ubuntu 13.10

2017-10-04 Thread sameira
http://www.devdummy.com/2017/10/systemctl-command-not-found.html On Thursday, December 19, 2013 at 3:00:53 PM UTC+5:30, bogdan.t...@quartzmatrix.ro wrote: > > After installing Ubuntu 13.10 systemctl is not working. The file was the > latest flsh image

RE: [beagleboard] x15 expansion connectors

2017-10-04 Thread Gerald Coley
No From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On Behalf Of Micka Sent: Wednesday, October 4, 2017 1:20 AM To: beagleboard@googlegroups.com; Gerald Coley Subject: Re: [beagleboard] x15 expansion connectors Gerald any news on a future

Re: [beagleboard] Eagle Library for the PocketBeagle to create Expansion Boards

2017-10-04 Thread H. Nikolaus Schaller
Works fine and is very useful. Thanks again! -- hns > Am 03.10.2017 um 22:50 schrieb Dan Brown : > > Try this version then please? > > On Tuesday, October 3, 2017 at 3:50:38 PM UTC-4, Dan Brown wrote: > While working with the PocketBeagle, I created a library for

Re: [beagleboard] x15 expansion connectors

2017-10-04 Thread Micka
Gerald any news on a future beagleboard x15 cape ? Thanks, Le dim. 11 sept. 2016 à 20:07, Gerald Coley a écrit : > It is in the System Reference manual. > The connector for the X15 is also listed in the BOM, but you need the > mating connector for the one in the BOM. >