Hi,
Can you try with ext4 file system?
Regards,
Madhu
On Mon, Oct 9, 2017 at 11:53 AM, Ashish Maurya
wrote:
> Hi terra,
> I got 5V 2A power supply, still facing same issue.
> Any thoughts ???
> Thanks.
>
> On Mon, Oct 2, 2017 at 3:57 PM, terra ÜÝÜ wrote:
>> I had this, when power supply was no
I understand that even though BBB boots from the eMMC first, if a bootable
microSD is inserted, it will boot from the microSD[1]. I believe uboot is
responsible for this behaviour and would like modify uboot.
- How would I go about doing it?
- Is it a matter of modifying uEnv.txt or a recompil
Dear All,
I am using Beaglebone green running linux 4.12.0-dirty.
I am trying to get HX117 adc work. I am facing some issues.
I am getting this error
hx711-gpio: probe of weight@0 failed with error -22
...
[1.926416] hx711-gpio weight@0: GPIO lookup for consumer sck
[1.93257
Hi Mala,
Thanks for your reply and appreciate your help on this.
Its started working once I try to boot from UART.
I am not sure what is the problem, I think it could be board or chip issue
and not in SW.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message be
I am new to imaged based systems. Am wondering if it is possible to use an OTA
update system like mender and use it on an debian image. Please share your
insights and experiences
https://mender.io/blog/porting-mender-to-a-non-yocto-build-system
https://mender.io/blog/notes-from-a-user-on-mender-
Noone to reply!??!!!
On Sunday, October 8, 2017 at 9:27:30 AM UTC+2, Ahmad Fatehi wrote:
>
>
> Hello, I used my beaglebone black for a while with usb power. Once I
> decide to test it with battery and switched it on with a Li-Ion battery and
> it switched on.But after that when I connect usb to
No one to reply??!!
On Sunday, October 8, 2017 at 9:27:30 AM UTC+2, Ahmad Fatehi wrote:
>
>
> Hello, I used my beaglebone black for a while with usb power. Once I
> decide to test it with battery and switched it on with a Li-Ion battery and
> it switched on.But after that when I connect usb to b
The flashing LED indicates that the PMIC is shutting down due to a excess
amount of current on power up. Sitting here, I can't recommend a fix as I
would need to look at the board to understand the issue. This is not an issue I
have run into before.
You could try running it off the DC jack and
The same happens when connecting DC jack! I must switch on the board by
using battery and then disconnect battery to run with usb or adapter power!
On Monday, October 9, 2017 at 2:06:59 PM UTC+2, gcoley1 wrote:
>
> The flashing LED indicates that the PMIC is shutting down due to a excess
> amoun
On Sat, Oct 7, 2017 at 5:18 PM William Hermans wrote:
> On Fri, Oct 6, 2017 at 11:38 PM, wrote:
>
>> Hi,
>>
>> Hi, I am new to beaglebone black PRU can anybody help me to use PRU in
>> c-language.
>>
>> Thank you
>> Ashok
>>
>
> http://lmgtfy.com/?q=beaglebone+PRU+in+C
>
To try to get some bett
OK! So, something has to be repaired on the board! You need to get it repaired!
Gerald
From: beagleboard@googlegroups.com [mailto:beagleboard@googlegroups.com] On
Behalf Of Ahmad Fatehi
Sent: Monday, October 9, 2017 8:13 AM
To: BeagleBoard
Subject: Re: [beagleboard] Re: My BBB doesn't turn on w
Is something wrong with the question?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to beagleboard+unsu
Does anyone have any experience of working with /dev/rpmsg_pruXX files from
within Node.Js/Bonescript? I've been playing around with the file-duplex
package and have data going into the PRU just fine, but I'm having an issue
getting data back into my userspace program. I've got the stream.on('da
So what did you decide the best option is? I'm sort of torn between a
socket that you could push wires into like a solderless breadboard and
something to attach a ribbon cable to, which would go to solderless
breadboard or vectorboard a few inches away. There was a statement
somewhere about h
On Sat, Oct 7, 2017 at 6:44 PM, Graham wrote:
> I recompiled the '.dtbo' for 48 MHz SPI clock, which is the maximum for the
> Sitara.
>
> Seems to work fine for a quick check.
>
> Ran speedtest-cli, which moves a fair amount of data through it...
> Download: 4.76 Mbit/s
> Upload: 5.96 Mbit/s
>
> U
I have never seen it fail, but since the USB power goes off when my
computer goes into deep sleep, it has never been run for more than a few
hours at a time.
It is at home.
I'll set it up on a permanent power supply and run it continuously for a
few days, and report back
I think you also ha
On Mon, Oct 9, 2017 at 1:25 PM, Graham wrote:
> I have never seen it fail, but since the USB power goes off when my computer
> goes into deep sleep, it has never been run for more than a few hours at a
> time.
>
> It is at home.
>
> I'll set it up on a permanent power supply and run it continuousl
In the past, I used to identify the type of device by reading the file
/proc/device-tree/compatible. For example, see this:
> hexdump -C /proc/device-tree/compatible
74 69 2c 61 6d 33 33 35 78 2d 62 6f 6e 65 2d 67 |ti,
am335x-bone-g|
0010 72 65 65 6e 00 74 69 2c 61 6d 33 33 35
On Mon, Oct 9, 2017 at 2:39 PM, Stephane Charette
wrote:
> In the past, I used to identify the type of device by reading the file
> /proc/device-tree/compatible. For example, see this:
>
>> hexdump -C /proc/device-tree/compatible
> 74 69 2c 61 6d 33 33 35 78 2d 62 6f 6e 65 2d 67
> |ti,
Hello Sir,
Seth here. Mr. Jason, I do not currently have any of the listed machines
they have available but I am on the market for a new machine soon, e.g.
fridge or other appliance.
With this in mind, I went a step back to see where FirstBuild got their
listing for the Green-Bean. GE suppose
>
> > Did I install the wrong build? Is this a bug, or is there a new/better
> way
> > for me to identify the difference between BBB, BBG, BBGW, etc?
>
> Please run:
>
> sudo /opt/scripts/tools/version.sh
>
> as something didn't get assembled right...
>
Was that supposed to fix it, or do you just
On Mon, Oct 9, 2017 at 12:39 PM, Stephane Charette <
stephanechare...@gmail.com> wrote:
> In the past, I used to identify the type of device by reading the file
> /proc/device-tree/compatible. For example, see this:
>
> > hexdump -C /proc/device-tree/compatible
> 74 69 2c 61 6d 33 33 35
On Mon, Oct 9, 2017 at 5:41 PM, Stéphane Charette
wrote:
> On Mon, Oct 9, 2017 at 12:39 PM, Stephane Charette
> wrote:
>>
>> In the past, I used to identify the type of device by reading the file
>> /proc/device-tree/compatible. For example, see this:
>>
>> > hexdump -C /proc/device-tree/compati
>
> Is it really worth it thou? ;)
>
Sorry, Robert, you lost me, I'm not familiar with the things you're
pointing out. From an end-user perspective, all I need to know is how can
I determine what type of board my code is running? I used to look at
/proc/device-tree/compatible but that no longer
>
> So if we assume the BeagleBone Green = BeagleBone Black (minus) HDMI
> (audio/video)...
>
...and the addition of the two GROVE ports. Not sure if that's important,
but in my case the software behaves differently and initializes different
things if running on a BBG since we expect certain devi
On Mon, Oct 9, 2017 at 8:24 PM, Stéphane Charette
wrote:
>> Is it really worth it thou? ;)
>
>
>
> Sorry, Robert, you lost me, I'm not familiar with the things you're pointing
> out. From an end-user perspective, all I need to know is how can I
> determine what type of board my code is running?
> ...and the addition of the two GROVE ports. Not sure if that's important,
> but in my case the software behaves differently and initializes different
> things if running on a BBG since we expect certain devices to be hooked up
> to the GROVE ports.
The i2c port is always active, the usart port
Will there be a wireless version of the PocketBeagle?
It is like the Raspberry Pi Zero. The wireless connectivity was lacking, so
now they have the Raspberry Pi Zero W.
torstai 21. syyskuuta 2017 18.35.38 UTC+3 Jason Kridner kirjoitti:
>
> https://beagleboard.org/pocket
>
> Trying to get a few th
On Mon, Oct 9, 2017 at 11:11 PM, Wilhelm Matilainen
wrote:
> Will there be a wireless version of the PocketBeagle?
> It is like the Raspberry Pi Zero. The wireless connectivity was lacking, so
> now they have the Raspberry Pi Zero W.
The PocketBeagle is now oshwa certified, so "everything" is ava
29 matches
Mail list logo