I am testing a new (to me) cape on Beaglebone Black which worked for two
days. The image is run on SDCARD. Suddenly I could not access the web on
the image and cannot SSH, no loss of IP connectivity. I can ping, I removed
the SD card and reset the BBB but same issues. I connected via USB and was
Motor pins 1 and 2 for Four motors are indicated on the BBB schematic. How
can I identify which pin is 1 and which is 2?
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe
Hi,
I have 4GB memory in the beaglebone black board received and 92% space is
used. First I tried to connect the board using serial from iMac and able to
talk to the system.
After that I connected the board from windows 10 and connected through ssh
and did pandas installation using command "pi
Sounds like software. Can you get DNS resolution? That’s the first thing
I’d check.
On Wed, Feb 6, 2019 at 9:55 AM Vince Seiferd wrote:
> I am testing a new (to me) cape on Beaglebone Black which worked for two
> days. The image is run on SDCARD. Suddenly I could not access the web on
> the imag
So now I found out that my board doesn't even give a HDMI output on any TV
which is bigger than 32 inches. I have tried forcing different resolutions
but no luck. Its only giving display on a smaller size TV. What do you
think might cause this issue? Is it due to inverted colors?
Thank you
On
For installing pandas, try apt-get instead. If that doesn't work, then as
Dennis said, just copy/paste the whole error message.
$ apt-cache search pandas
python-pandas - data structures for "relational" or "labeled" data
python-pandas-doc - documentation and examples for pandas
python3-pandas - da
Thank you for the reply Charles. Yes, I am aware of the general process
required. I was wondering specifically if all or which of the alternate
boot methods (ie. mainly uSD, USB, or serial) would work on new blank chips.
On Friday, February 1, 2019 at 11:29:27 AM UTC-8, Charles Steinkuehler
w
I DNS resolution is intermittent, I have been using all IP address and no luck.
I assumed it was the SDcard image so did a new one and no change. Tried to just
ssh to the original BBB image and no luck either. My last thing is to reflash
eMMC but worried it's hardware!
Thanks
--
For more opti
Hello,
I guess boot time was fastened to a quicker amount of time w/ the debian
repos taking longer to update and upgrade. I guess?
Seth
P.S. I do not need help on this idea, I think.
On Tuesday, February 5, 2019 at 7:18:24 PM UTC-6, Mala Dies wrote:
>
> Hello,
>
> Are other people here gettin
Hello,
Seth here, again. Are you running your board(s) w/ SD Card or on the eMMC
of the BBBs? I know this is happening over and over again but my ideas
remain the same. Try to, if you are using SD Card, update your eMMC or
erase the contents of the eMMC.
U-Boot overlays need to be updated. If
On Tue, Feb 05, 2019 at 06:16:52PM -0800, Vince Seiferd wrote:
> I am testing a new (to me) cape on Beaglebone Black which worked for two
> days. The image is run on SDCARD. Suddenly I could not access the web on
> the image and cannot SSH, no loss of IP connectivity. I can ping, I removed
> the
11 matches
Mail list logo