David,
Does the USB1 automatically switch to host mode when you plug the type-C
adapter?
Can you please print the kernel log without the adapter connected and then plug
the
type-C adapter?
Looking at device tree (usb1 dr_mode = "otg") I assumed that the type-C was
designed for
both device
David,
On 18/08/2020 21:35, David Nolan wrote:
Hi Roger,
Thanks for your email. Apologies for the delay getting back
to you. Yes, I'm connecting the camera to the Type-C port. The
camera has a Micro B
Hi David,
On 13/08/2020 19:21, Dave wrote:
Hi there,
I'm trying to connect a USB3 camera I have to the BBAI (uname -r gives
4.14.108-ti-r131).
How are you connecting the camera to the Type-C port? Does the camera support
Type-C?
If not what type-C to Type-A adaptor are you using? Does it
On 13/02/2019 19:13, Robert Nelson wrote:
>> Sorry, I'm still a bit lost here ;).
>> How do I see the PRUSS kernel patches that you have picked up?
>
> Okay for v4.19.x & v4.20.x, i've picked up RFC 1: (I need to backport
> the am33xx-l4 dts changes to then backport RFC2..)
>
>
Robert,
On 13/02/19 18:04, Robert Nelson wrote:
> Hi Roger,
>
> On Wed, Feb 13, 2019 at 9:52 AM Roger Quadros wrote:
>>
>> Robert,
>>
>> On 28/01/19 21:15, Robert Nelson wrote:
>>> On Mon, Jan 28, 2019 at 12:58 PM Daniel Kulp wrote:
I tried to update our app image from the 4.14
Robert,
On 28/01/19 21:15, Robert Nelson wrote:
> On Mon, Jan 28, 2019 at 12:58 PM Daniel Kulp wrote:
>>
>>
>> I tried to update our app image from the 4.14 bone kernel to the 4.19 bone
>> kernel and ran into a big problem: uio_pruss is not configured in as it is
>> with 4.14. Is this an
On 13/02/19 13:57, Matthijs van Duin wrote:
> Since I just noticed a bunch of people were added to the Cc... Just for
> context, this is the patch set I made to get uio-pruss for the am335x and
> dra7/am57xx working again on the 4.19-ti series kernel:
>
+David, Tony, Suman.
Robert, Matthijs, Daniel,
On 28/01/19 21:15, Robert Nelson wrote:
> On Mon, Jan 28, 2019 at 12:58 PM Daniel Kulp wrote:
>>
>>
>> I tried to update our app image from the 4.14 bone kernel to the 4.19 bone
>> kernel and ran into a big problem: uio_pruss is not configured in
Hi,
On 07/02/19 23:27, chuck.dobson...@gmail.com wrote:
> Free Batteries
> https://www.myfpvstore.com/?affiliates=c9f0f895fb98ab9159f51fd0297e236d
>
> On Monday, August 1, 2016 at 4:49:05 PM UTC-4, lightshadown wrote:
>
> I been searching on this forum but cant find anything related for
Hi Alan,
On 06/11/18 06:47, Alan Thomason wrote:
> Hi Roger..
>
> Thanks for the quick reply. I'll give that a try, but I should have
> mentioned the host PC that the Beaglebone will normally interface with this
> project will be Windows based. Unless I am misunderstanding, this solution
>
Hi,
On 05/11/18 15:47, Alan Thomason wrote:
Hi There...
I want to reset the time and date on my BeagleBone black from the host PC,
ideally as an automatic task when the system boots up. I only hook up to the
wider internet when I need updates, usually I just hook up to the PC an
Hi Stephen,
DP83867IR is a tricky PHY to use due to its quasi state bootstrap pins. Each
pin can have 4 states.
You will need to use strong pull up/down on the bootstrap pins to ensure that
it latches a correct bootstrap at Power on reset.
Can you cross check if the bootstrap configuration is
Hi,
On 12/09/18 17:09, LYB wrote:
> Hi.
> I'm not sure that is the exact place to ask, but...
> I'm trying to connect an external NAND to the GPMC pins. I updated the device
> tree for that, and the NAND is identified correctly.
> Yet, later during the nand init, the partitions, as defined in
It probably is 4Gb (Gigabit) which means 512MB.
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
On 17/05/18 13:19, Mike Maikaefer wrote:
> No, when you check out the BOM or the schematic, you will
Hi Iain,
There was an attempt [1] to run Xen on DRA7-evm board which uses the same SoC
family that's on the X15 board.
However it is based on an old u-boot and kernel.
I'd be nice if you could share patches/instructions if you manage to get this
working on mainline u-boot. :)
[1] -
Hi Angel,
On 18/01/18 06:09, Angel Sosa wrote:
> On Tuesday, January 16, 2018 at 11:51:57 AM UTC-5, marc bellazzini wrote:
>> Hello Angel,
>> Mine is still collecting dust after my failed attempt at booting off the
>> eSATA and making the modifications you have also done. Very disappointing
>>
16 matches
Mail list logo
