Robert,
I use a VMware on which I run Ubuntu 14.04
On Sunday, July 6, 2014 12:25:18 AM UTC+5:30, Gibson Justian wrote:
>
> Hi folks,
> I am trying to boot the BBB using the tftpboot procedure
> and I used the yocto openembedded build .
> When I tried to transfer
Hi ,
Robert as you suggested, I tried and below is the output
tftp localhost 69
tftp> get uImage
Received 5076806 bytes in 1.6 seconds
tftp>
On Sunday, July 6, 2014 12:25:18 AM UTC+5:30, Gibson Justian wrote:
>
> Hi folks,
> I am trying to boot the BBB usi
this is the one causing the problem for booting?? If so any work around
to fix this ??
Regards,
Gibson
On Sunday, July 6, 2014 12:25:18 AM UTC+5:30, Gibson Justian wrote:
>
> Hi folks,
> I am trying to boot the BBB using the tftpboot procedure
> and I us
uggestions!!!
On Sunday, July 6, 2014 12:25:18 AM UTC+5:30, Gibson Justian wrote:
>
> Hi folks,
> I am trying to boot the BBB using the tftpboot procedure
> and I used the yocto openembedded build .
> When I tried to transfer the image file usin
Sorry but I do not remember the post topic. Also, just as
> a FYI, I think you'll find Angstrom on the BBB to be a dead end.
>
>
> On Thu, Jul 10, 2014 at 6:46 PM, Gibson Justian > wrote:
>
>> Hi William and Alfredo,
>>
>> tftpboot problems
>>
>&
Hi William and Alfredo,
tftpboot problems
Observation with Yocto 1.6 :
Below are the following observation after i executed the get
uImage.
tftp 192.168.95.130
tftp> get uImage
Received 5076896 bytes in 1.1 seconds
Do I have to transfer the uImage or zImage? I do not find any zImag
Hi William,
I am using Yocto 1.6 (daisy) and i could get the file out using
the get command, but still having the same error!!!
I use the Debian as the host machine. I am very new to the tftp stuff so
just want to get a hold on it and followed the steps from the internet.
Tested with th
Hi folks,
Thank you for your valuable suggestions, atlast I was able to debug
the application code using eclipse kepler and gdb the target as BBB, but
one question I have is that, Will I be able to debug the kernel code in
case I implement a method on the kernel space?
Has anyone of tried
Hi,
I am new in using the Eclipse IDE and the Beaglebone Black. I run
a debian distribution in the beaglebone black (built from Robert C Nelson's
git )and the host machine is the debian gnu linux in Vmware , apparently
the application is cross compiled with arm-linux-gnueabihf using
Hi,
Any Idea to debug the beaglebone black using the FTDI 3V3 cable?
Regards,
Gibson
On Friday, December 28, 2012 9:00:51 PM UTC+5:30,
steve.ch...@googlemail.com wrote:
>
> Hi
>
> This post concerns the process for setting up Eclipse Juno Remote
> Debugging on the Beaglebone
>
> I h
10 matches
Mail list logo