you cannot drive a mosfet with a BBB IO pin
they make Fet drivers to do the heavy lifting
a gate on a mosfet can take a lot of current to make it work
just an example driver there are a lot more of them Microchip TC1410
On 3/5/2015 2:38 PM, g...@sensa.io wrote:
> I did this setup with an LED
You are most likely correct. I would a schematic to be sure, but you most
likely fried it with the word 12V on that page.
http://www.elinux.org/Beagleboard:BeagleBoneBlack#Expansion_Header_Usage
Gerald
On Thu, Mar 5, 2015 at 3:38 PM, wrote:
> I did this setup with an LED strip, MOSFETs, and
I did this setup with an LED strip, MOSFETs, and a separate 12V power
supply: http://forums.adafruit.com/viewtopic.php?f=8&t=69691&p=353076
See 5 posts down of a picture.
This setup has apparently fried 2 of my Beaglebones.
I tested the gate pins on the MOSFETs (which were the only thing connecte