john...@gmail.com wrote:
From: Gerald Coley ger...@beagleboard.org
Reply-To: beagl...@googlegroups.com
Date: Thursday, May 22, 2014 at 12:25 PM
To: beagl...@googlegroups.com beagl...@googlegroups.com
Subject: Re: [beagleboard] Board Does Not Power On, Power LED Flashes
Once
You should
I've managed to damage BBB when I was disconnecting power input cable from
it.
Is the following issue of old Beaglebone still valid for the BBB?
http://www.elinux.org/Beagleboard:BeagleBone#Board_Does_Not_Power_On.2C_Power_LED_Flashes.5BAll_Revisions.5D
Just wondering, I might have damaged it
You really need to power down the board and not pull out the power.
Whatever the cause, the board needs to be repaired.
Gerald
On Thu, May 22, 2014 at 1:57 PM, Miroslav Rudišin rudi...@gmail.com wrote:
I've managed to damage BBB when I was disconnecting power input cable from
it.
Is the
By powering down you mean either:
- issuing power off sequence from the OS
- holding power button for 8 seconds
Or is it also good enough just disconnecting power supply from wall outlet?
Thanks.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because
You should be able to just press the power button once briefly and it
shutdown. Assuming the image you are running has it. The latest image does
have it.
After it powers down, then you can remove the power. We need to make sure
the PMIC powers down all the rails to the processor in order.
OK, thanks.
You might consider adding this information into the manual.
On Thursday, May 22, 2014 9:25:07 PM UTC+2, Gerald wrote:
You should be able to just press the power button once briefly and it
shutdown. Assuming the image you are running has it. The latest image does
have it.
From: Gerald Coley ger...@beagleboard.org
Reply-To: beagleboard@googlegroups.com
Date: Thursday, May 22, 2014 at 12:25 PM
To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Subject: Re: [beagleboard] Board Does Not Power On, Power LED Flashes Once
You should be able to just
@googlegroups.com
Date: Thursday, May 22, 2014 at 12:25 PM
To: beagleboard@googlegroups.com beagleboard@googlegroups.com
Subject: Re: [beagleboard] Board Does Not Power On, Power LED Flashes Once
You should be able to just press the power button once briefly and it
shutdown. Assuming the image you
-To: beagl...@googlegroups.com javascript:
Date: Thursday, May 22, 2014 at 12:25 PM
To: beagl...@googlegroups.com javascript:
beagl...@googlegroups.comjavascript:
Subject: Re: [beagleboard] Board Does Not Power On, Power LED Flashes
Once
You should be able to just press the power button once