On Sunday, March 8, 2015 at 5:58:07 PM UTC+1, Walker Archer wrote:
>
> I really didn't expect that to work since the 5v ports stay powered after
> a shutdown. However, I went ahead and tried it and you are absolutely
> right. The 3v ports go dark after a shutdown.
>
I connected a led to pins
I really didn't expect that to work since the 5v ports stay powered after a
shutdown. However, I went ahead and tried it and you are absolutely right.
The 3v ports go dark after a shutdown.
That is exactly what I need. Thanks!
--
For more options, visit http://beagleboard.org/discuss
---
Y
How about an LED with a series resistor from 3.3V to ground? Pin 9-3 or
Pin 9-4.
If the BBB is powered up, there is 3.3V there. If the BBB has no power,
there is not 3.3V there?
--- Graham
==
On Saturday, March 7, 2015 at 3:05:02 PM UTC-6, Walker Archer wrote:
>
> I wasn't really considering
>
> I wasn't really considering a light pipe because the case is fairly large
> (8"x8"x4") and full of stuff to get around. It will need to be fairly
> visible in direct sunlight as well. I see that Mouser has a 6" flexible
> light pipe that might work... although I'm not sure how I'd keep it
On Sat, Mar 7, 2015 at 12:52 PM, Brian Lloyd wrote:
>
>
> On Sat, Mar 7, 2015 at 12:48 PM, Walker Archer
> wrote:
>
>> I have a project where a BeagleBone Black will be completely inside a
>> case. But I would really like to be sure that the board gets powered down
>> properly when shutting dow
On Sat, Mar 7, 2015 at 12:48 PM, Walker Archer wrote:
> I have a project where a BeagleBone Black will be completely inside a
> case. But I would really like to be sure that the board gets powered down
> properly when shutting down. Ideally I'd like to have a panel-mounted LED
> that mimicked t
I have a project where a BeagleBone Black will be completely inside a case.
But I would really like to be sure that the board gets powered down
properly when shutting down. Ideally I'd like to have a panel-mounted LED
that mimicked the BBB power LED.
What is the best way to do this? My initi