My BBGreen got fried (when I power it up it just dims once the power led
and that's all it does).
Can someone explain me what I did wrong so it won't happen to me or others
again?
Explanation of what I did: The BBG died after several days working 24/7,
powered up from a power supply 5V
Hey, I think I'm undergoing the symptom like what you'd have experienced...
What can I do for recovery of BBB?? What does it mean that;
[I guess I expected the PWR led to be lit any time 5V was feeding the
board, regardless of it's On/Off state.]
I was designing the program that can controls
I have a same problem.
but, it happened to my BBB because one of my wires has a connection to the
below of my BBB. and I think is dead! :(
for the record same as you in my BBB power led just flashes one time and go
off again .
On Sunday, January 25, 2015 at 10:05:20 PM UTC+3:30, Islam Rostom
I also have same problem for my two BBB Rev C. One have no response when
plug the power, either from usb or DC jack, and the other one just have
power led flashing once then nothing happen.
I follow the user guide carefully to use the BBB such as push power button
for 8 second to turn power
Hi,
I updated the Angstrom Distribution 2013-09-04 image on my BBB. The process
seem to run well. After it ended, I get the SD card out from the BBB, and
restarted it, with plugging in again the BBB via USB. But then only the
power led lits, and nothing else.
I've repeated the process many
Did you try pushing the power button or unplugging the power/USB cable and
plugging it back in?
Gerald
On Fri, Jan 17, 2014 at 10:12 AM, feniell...@gmail.com wrote:
hello sorry for my english, I also had a problem with the BBB, after
giving the command poweroff, the BBB is off, now the
hello sorry for my english, I also had a problem with the BBB, after
giving the command poweroff, the BBB is off, now the power led does not
turn on when I put the usb cable and the power cable. you have any idea?
--
For more options, visit http://beagleboard.org/discuss
---
You
Sounds like the board may have gotten zapped. Leave it unplugged for 30
minutes, all cables, and try it again. If is still does not work, then you
will need to get it looked at.
Gerald
On Fri, Jan 17, 2014 at 10:30 AM, feniell...@gmail.com wrote:
I tried it, but the Power LED does not light,
I did as you said, but nothing works :(
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Ok. Then you need to get it looked at.
http://beagleboard.org/Support/RMA
Gerald
On Fri, Jan 17, 2014 at 1:11 PM, feniell...@gmail.com wrote:
I did as you said, but nothing works :(
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are
ok! thanks to everyone for the help
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this group and stop receiving emails from it, send an email
to
Thanks a lot guys , I just discovered one of my supposedly fried Beaglebone
Black works after pressing power button and reset button in cycles for few
minutes after reading this post. Although it had stopped while i was doing
something on it and never booted up after.
Now going to try the same
12 matches
Mail list logo
