Update on BeagleBoard Debian on the 571x IDK:
I just tried imaging a smaller SD Card than what I was attempting before.
This time I used a 4 GB SD card, whereas previously used a 32 GB card.
***Am able to boot into Debian (BeagleBoard.org Debian Image 2017-06-04)
and am able to login! ***
Well right now we're moving forward with the BeagleBoard-X15 image on the
5728 part, but I'm still taking a look at booting the BB-X15 image on the
571x IDK - at least through today...
Today I re-imaged a 16 GB SD Card with the entire BB-X15 image file and
then dd'ed just the re-built MLO and
Hi Robert,
Yesterday, I built u-boot wrong after making your recommended change to
board/ti/am57xx/board.c. The build date on my u-boot from yesterday was
showing May 16, 2017.
When I made your recommended change in another 2017.01 u-boot tree on
another VM, the change allowed my 571x/5718
Thanks Robert!!!
The information/education we're getting from this site is really helpful!!
Changed board.c::board_fit_config_name_match(..) to always return '0', but
the MLO/SPL appears to be stuck at the same place...
Since the MLO/SPL, is printing out its startup string on console, tomorrow
On Sun, Jun 11, 2017 at 11:54 AM, Jeff Andich wrote:
> in the 2017.01 u-boot, I attempted to change the default device tree that
> u-boot is using to see if that would allow u-boot to boot on the 5718 IDK,
> but the console output still stops just after the SPL prints its
in the 2017.01 u-boot, I attempted to change the default device tree that
u-boot is using to see if that would allow u-boot to boot on the 5718 IDK,
but the console output still stops just after the SPL prints its output
(please see below). I get the same result regardless of whether I use the
Hi Robert,
Here's what I'm seeing so far, what I've tried, and what's coming to mind
to try to get the debian 8.8 image going on the 571x IDK:
*When our 5718 IDK, is booting the
bbx15-debian-8.8-lxqt-4gb-armhf-2017-06-04-4gb.img image from SD Card, the
console output dies shortly after the
Thanks a lot Robert!!
Will update what happens here... Regards, Jeff
On Tuesday, June 6, 2017 at 2:15:27 PM UTC-5, Jeff Andich wrote:
>
> Hi,
>
> Does the BeagleBoard-X15 image run, out of the box on the 5718 Industrial
> Development Kit (IDK) in addition to the 572x EVM or are