The grinder that is set up for chisels and some plane irons is the Work Sharp
3000. That has a little window or port on the side of the machine and the
angle is already set for you.
There are a bunch of other grinders and if you have the money a couple of very
expensive sharpening systems
How about some extra foam coverings for things like your hammer Bob
in case it drops down in the swamp? Good luck and thanks for all the
good works you do for others. Lee
On Wed, Jan 14, 2009 at 07:24:44PM
-0500, chiliblindman wrote:
I got two calls tonight about a work mission trip
Well, the whole idea of perforating the i beam is now moot. I did some
more detailed groping of the i beam. Remember, I often go off on mental
paths without fully investigating reality first.
I know some of you won't understand, or possibly believe my explanation
here. Well, it turns out
I think Bob just about covered it. The only thing I would add is, not only is
the bevel important, the edge should be straight and
exactly 90 degrees from the plane of the iron or chisel. Also, The honing step
is very important. Honing is the procedure of
removing the hook (of metal) left
For the kitchen knife, it is best to use a steel. If one uses a grinder of any
kind the chance of ruining the knife is good. The ideal is to hold the knife
at the angle the factory set on the knife. Start the knife at the bottom of the
steel, working upward and pulling the knife toward you.
:
http://www.jaws-users.com/
For a complete list of email commands pertaining to the Blind Handy Man list
just send a blank message to:
blindhandyman-h...@yahoogroups.comyahoo! Groups Links
__ NOD32 3768 (20090115) Information __
This message was checked by NOD32 antivirus
I've got a long round metal rod that came with my knife set. Are you supposed
to hold the blade perpendicular to the steel, that is, the ends of hte knife
and rod are at right angles to each other? Clarify your message a bit mire, in
other words, if ye wouldn't mind.
- Original Message
the following
address for more information:
http://www.jaws-users.com/
For a complete list of email commands pertaining to the Blind Handy Man list
just send a blank message to:
blindhandyman-h...@yahoogroups.comyahoo! Groups Links
__ NOD32 3768 (20090115) Information
Users List, then visit the following
address for more information:
http://www.jaws-users.com/
For a complete list of email commands pertaining to the Blind Handy Man
list
just send a blank message to:
blindhandyman-h...@yahoogroups.comyahoo! Groups Links
__ NOD32 3768 (20090115
3768 (20090115) Information __
This message was checked by NOD32 antivirus system.
http://www.eset. http://www.eset.com com
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
/ users.com/
For a complete list of email commands pertaining to the Blind Handy Man
list
just send a blank message to:
blindhandyman- mailto:blindhandyman-help%40yahoogroups.comYahoo
h...@yahoogroups.comyahoo! Groups Links
__ NOD32 3768 (20090115) Information __
This message
Take the knife and make a 90 degree across the steel. Hold the knife at the
angle of the bevel of the cut edge of the knife. Draw the knife up or down the
steel, striking the knife with the cut side away from the stroke of the knife
and pulling the knife toward you. Since I lost my sight. I
Sharpening kitchen knives with a steel, as I do it?
Hold the steel in your right hand with the end pointing 45 degrees left of
straight ahead
Hold the knife in your left hand with the point aimed 45 degrees right of
straight ahead, so the knife and steel are at 90 degrees to each other.
The edge
HI, Speaking of sharpening blades, has any one on the list seen or herd of the
sharp-all machine.. The thing is so post to sharpen saw blades and almost any
thing else.. Just wondering if a blind guy could use this machine or not..
ROB FROM MINNESOTA
- Original Message -
From:
Good job Betsy.
David Ferrin
I believe that tomorrow is another day, and I'll probably screw that one up
too.
- Original Message -
From: Betsy Whitney braill...@gmail.com
To: blindhandyman-yahoogroups.com blindhandyman@yahoogroups.com
Sent: Thursday, January 15, 2009 5:47 PM
Subject:
Dan,
There is something I don't understand here. The water pipe goes under the beam
now doesn't it?
What changes besides raising it tighter under the joists to continue it's way
to feed the rest of the building?
- Original Message -
From: Dan Rossi
To:
Today I had an oil delivery. The tank was pretty low the indicator was a
little under the 1/4 mark. After they dropped 211 gallons Karen looked at
the indicator to see exactly how it reads, The indicator above the full line
or level with it. She panicked because it did not change. Just
Well, it's pine wood derby building time again. Helping my grandson I got
out some plastic wood to fill a gouge that he took out of the top. I had his
dad read the setup time to see if we could put in a little then shortly
after work more on the car and finish filling tonight. When we closed
, then visit the following
address for more information:
http://www.jaws-users.com/
For a complete list of email commands pertaining to the Blind Handy Man list
just send a blank message to:
blindhandyman-h...@yahoogroups.comyahoo! Groups Links
__ NOD32 3768 (20090115
Plastic wood uses denatured alcohol as a solvent. If it gets a little dry,
add a little alcohol and it can be restored to it's beginning gooey state.
- Original Message -
From: Don n5...@yahoo.com
To: blindhandyman@yahoogroups.com
Sent: Thursday, January 15, 2009 7:49 PM
Subject: Re:
list of email commands pertaining to the Blind Handy Man
list
just send a blank message to:
blindhandyman-h...@yahoogroups.comyahoo! Groups Links
__ NOD32 3768 (20090115) Information __
This message was checked by NOD32 antivirus system.
http://www.eset.com
[Non-text
I have heard that one big benifit for a blind person with the Dyson is that
it can suck up some pretty sizable materials without damaging or clogging
the machine. What is your experience with this? Ever since Leggos have
come into the house, I have been leaving most of the vacuuming to the
Hi Jennifer,
Well, that reason for getting out of vacuuming is as good as why I am not
allowed to cut the grass or shovel snow. Years ago I mowed down Karen's
flowers so no longer allowed to mow the yard. Then when I hit the car with
the snow shovel, it was taken away from me. Since I joined
23 matches
Mail list logo