It would be interesting to do the trig necessary to find the error caused by
the click rule sometimes needing to be at a slight angle to flat, I'd bet
it's very small. The more extensions you need, the longer the measurement,
the smaller the induced error Unless the edge I'm measuring too at the
@yahoogroups.com
Sent: Tuesday, January 20, 2009 12:26 PM
Subject: Re: [BlindHandyMan] Clickrule question
It would be interesting to do the trig necessary to find the error caused by
the click rule sometimes needing to be at a slight angle to flat, I'd bet
it's very small. The more
: [BlindHandyMan] Clickrule question
Matt,
Thanks so for the information. I would appreciate if you would keep us
informed as to how you like/dislike your new ruler. By the way, what is the
company's name in Lincoln, Nebraska that also sells the ruler?
Tom
_
From: blindhandyman
The only thing I have found out about the ClickRule, since I had to have
mine repaired, is that there is a place in Lincoln NE and Lafayette
Colorado that go by the name of Community Advocates that claim
responsibility for the ClickRule.
When I was trying to search out info to find out where
[mailto:blindhandy...@yahoogroups.com]
On Behalf Of Matt
Sent: Saturday, January 17, 2009 10:45 PM
To: blindhandyman@yahoogroups.com
Subject: [BlindHandyMan] Clickrule question
Hello folks,
Just got my click rule today.
When measuring, and marking, do you make your marking cut immediately after
@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Matt
Sent: Saturday, January 17, 2009 10:45 PM
To: blindhandyman@yahoogroups.com
Subject: [BlindHandyMan] Clickrule question
Hello folks,
Just got my click rule today.
When measuring, and marking, do you make your marking cut
@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Matt
Sent: Sunday, January 18, 2009 2:58 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] Clickrule question
Yes, I went through NFB.org but there is a place in Lincoln Nebraska which
evidently sells it, and when you
to the fun with tubes group send an email to,
funwithtubes-subscr...@yahoogroups.com
- Original Message -
From: Matt themullin...@sbcglobal.net
To: blindhandyman@yahoogroups.com
Sent: Sunday, January 18, 2009 8:57 AM
Subject: Re: [BlindHandyMan] Clickrule question
Yes, I went through
[mailto:blindhandy...@yahoogroups.com]
On Behalf Of Matt
Sent: Sunday, January 18, 2009 9:58 AM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] Clickrule question
Yes, I went through NFB.org but there is a place in Lincoln Nebraska which
evidently sells it, and when you receive the one from
Hello folks,
Just got my click rule today.
When measuring, and marking, do you make your marking cut immediately after the
raised line, if you want to make an equal inch or half inch measurement, or do
you cut immediately before the last raised line?
Thanks,
Matt
[Non-text portions of this
10 matches
Mail list logo