Thanks Rurik, it worked!
On Wed, Nov 14, 2012 at 10:41 AM, Rurik A. Primiani
rprim...@cfa.harvard.edu wrote:
Hi Ricardo,
If you're on Linux I believe you can use the 'xilinxupdate' command:
$ xilinxupdate -uninstall
To downgrade to the previous version.
Best,
Rurik
On 11/13/2012
Based on the ROACH-2 Production Test Machine Setup document...
https://docs.google.com/a/ska.ac.za/document/d/1tqw4C6uZ6EULl1OykTFL_vQTnK52UBr0aYqTg44E5wg/edit?pli=1
...it seems like ROACH2s should have MAC addresses that match this pattern:
02:*:01:*;*;*
Is there a convention for the
Hello Laura,
I think this is a great idea and have been playing around with the idea
of setting up something similar for the development team here at UTB. I had a
chat with a few people during this past workshop about having a vm on a cloud
for easy access.
In any case, I'd
Hi, Alec,
On Oct 25, 2012, at 5:29 PM , Alec Rust wrote:
Correction: To get the new macros to load one must also erase another section
of flash. This can be done in one step so please replace the instruction in
4b with: setenv writeuboot protect off 0xfff4 0x\; era
0xfff4
Dave
Im forwarding an email that was circulated a few weeks back on the ROACH2
serial number scheme.
Regards
Shanly
-- Forwarded message --
From: Alec Rust a...@ska.ac.za
Date: Fri, Jul 20, 2012 at 4:20 PM
Subject: ROACH2 Serial number scheme
To: Mo Ohady m...@digicom.org,
Thanks, Shanly,
Is it correct to assume that each manufacturer's batch number is unique for
that manufacturer only? IOW, Digicom ('D' = 0x44) could build a roach2 rev 2,
batch 1, board 1 and another manufacturer could also build a roach2 rev 2,
batch 1, board 1 and the only distinction
On Fri, Nov 16, 2012 at 9:19 AM, David MacMahon
dav...@astro.berkeley.eduwrote:
Thanks, Shanly,
Is it correct to assume that each manufacturer's batch number is unique
for that manufacturer only?
IOW, Digicom ('D' = 0x44) could build a roach2 rev 2, batch 1, board 1 and
another manufacturer
On Nov 15, 2012, at 10:10 PM, David MacMahon wrote:
= reset
U-Boot 2011.06-rc2-0-g8f3f444-dirty (Oct 25 2012 - 15:40:35)
CPU: AMCC PowerPC 440EPx Rev. A at 533.333 MHz (PLB=133 OPB=66 EBC=66)
No Security/Kasumi support
Bootstrap Option C - Boot ROM Location EBC (16
This No ethernet found. was a problem...
= dhcp
No ethernet found.
I fixed it by running these commands at the u-boot prompt:
setenv ethact ppc_4xx_eth0
setenv ethaddr 02:44:01:01:03:10
saveenv
reset
Then is came up with the network available (i.e. dhcp and tftp worked). I
used the
Good plan David, will do. There are some more updates so I will release
this with the new round.
On Fri, Nov 16, 2012 at 1:53 AM, David MacMahon
dav...@astro.berkeley.eduwrote:
Hi, Alec,
Thanks for the updates!
On Oct 25, 2012, at 7:55 AM, Alec Rust wrote:
To program the new u-boot (NB!
10 matches
Mail list logo
