[casper] ROACH1 QDR size

Hi All, Is someone able to confirm that the size of the QDR chips on ROACH 1 boards depends solely on the board version? If this is indeed the case, does anyone know the QDR specs for the different board iterations? Cheers, Jack

Re: [casper] Ubuntu 12.04 Screen Flickering

SOLVED!!! Hi All, here the solution... At the first boot the video card driver may not work, try to boot in safe mode (hold left Shift key while booting), select to start in failsafe mode using a generic graphics driver, then resume the boot. You will see the Ubuntu Desktop, from the System

[casper] Failed to load library dspsigops

Hi all, I have installed the new toolflow having MATLAB R2012b and Xilinx 14.4, adding also the removed pcores available from your repository. Making a simple model file and running the casper_xps I got two error messages: Unsupporter Xilinx System Generator version 14.4 Failed to load library

Re: [casper] Failed to load library dspsigops

Hi Andrea I have just updated xps_library/casper_xps.m to support Xilinx version 14.4. If you pull from ska-sa mlib_devel you will get the change. Regards Wes On Fri, Mar 1, 2013 at 5:42 PM, Andrea Mattana matt...@ira.inaf.it wrote: Hi all, I have installed the new toolflow having MATLAB

Re: [casper] ROACH1 QDR size

Hi, Jack, We noticed that one of our designs gave bogus results when run on a ROACH 1 board with a serial number in the range 02, but valid results when run on a ROACH 1 board with a serial number in the ranges 03 or 04. After much head scratching, we opened up one 02, one

Re: [casper] ROACH1 QDR size

Hey David, I know it's probably too late, but I figured out how to do a QDR-corner turn without ping-ponging (thus, doubling the effective size of the QDR). Give me a shout if you need this in the future! On 03/01/2013 10:23 AM, David MacMahon wrote: Hi, Jack, We noticed that one of our

Re: [casper] ROACH1 QDR size

hi ryan, can you check this into one of the GIT repositories? thanks, dan On Fri, Mar 1, 2013 at 10:37 AM, Ryan Monroe ryan.m.mon...@gmail.comwrote: Hey David, I know it's probably too late, but I figured out how to do a QDR-corner turn without ping-ponging (thus, doubling the effective

Re: [casper] ROACH1 QDR size

It's not that complete. I could write a memo about it and throw around some matlab code. I implemented it for a demo several months ago but it was never tidy. Whoever actually needs it would have half of their work done though. Basically, you just have to permute the bits of the address

Re: [casper] ROACH1 QDR size

Hi David, That was exactly the information i was looking for -- thanks! Jack On 1 March 2013 18:23, David MacMahon dav...@astro.berkeley.edu wrote: Hi, Jack, We noticed that one of our designs gave bogus results when run on a ROACH 1 board with a serial number in the range 02, but