Hi Grace,
If you are using a linux computer you can issue the command line instruction:
arp -a
You will see a list of devices active
If your have a windows computer open a CMD window and issue the same command
and see the devices.
Hope this helps.
Bob
On Jul 12, 2022, at 3:38 PM, Michael
Consider making a lookup table. If your accuracy requirements and space will
allow it. This is the way things use to be done before calculators and
computers and it will work in a lot of cases.
Bob Stricklin
> On Dec 13, 2021, at 6:55 AM, baldwin wrote:
>
> Hi Guys,
>
> Quic
will be interested to see what you find.
Bob Stricklin
On Dec 9, 2021, at 9:49 PM, 'Benjamin Godfrey' via
casper@lists.berkeley.edu<mailto:casper@lists.berkeley.edu>
mailto:casper@lists.berkeley.edu>> wrote:
Hi Tony,
I do not think there is a header. At least I am collecting as much data
on at a lower cost to you.
Bob Stricklin
On Jun 24, 2021, at 8:30 PM, Brian Bradford
mailto:bbradford...@gmail.com>> wrote:
Hey Jack,
A little late here but better late than never I suppose...
Papers worth a read:
*
https://sutherland-hdl.com/papers/2013-SNUG-SV_Synthes
All,
Since you mostly have a nice radio telescope handy you could also calibrate
your time standards by using a paticular pulsar and an agreed upon method.
Bob Stricklin
On Mar 13, 2019, at 1:23 AM, David MacMahon
mailto:dav...@berkeley.edu>> wrote:
Hi, Dan,
Thanks for summarizi
Here is a link to an Analog Devices Ap note discussing an accurate timing
reference. It may be a good reference to help you.
https://www.analog.com/media/en/technical-documentation/application-notes/AN-1002.pdf
Bob Stricklin
On Mar 8, 2019, at 8:04 PM, John Ford
mailto:jmfor...@gmail.com
a preconfigured SNAP image you may be able to skip this step.
Run ifconfig to determine the Pi ip address and mac address. You can set this
to be static in the Pi or force it on your router.
Bob Stricklin
On Oct 19, 2018, at 1:20 PM, David Marsh
mailto:davidmma...@gmail.com>> wrote:
Hell
interfaces…
http://www.ti.com/lit/an/scea035a/scea035a.pdf
I am a retired engineer that follows this list and offer these suggestions to
hopefully help you in your efforts.
Bob Stricklin
On Oct 19, 2018, at 2:04 AM, Nitish Ragoomundun
mailto:nitish.ragoomun...@gmail.com>> wrote:
Hi al
but
with considerable development time.
Bob Stricklin
On May 4, 2015, at 10:02 PM, Jack Hickish
jackhick...@gmail.commailto:jackhick...@gmail.com wrote:
Hi John,
Thanks for the info. I'll add Litelink to my list of suppliers to investigate.
We have no particular urge to multiplex the signals
VFS: Mounted root (nfs filesystem) readonly on device 0:11.
Note that your root is being mounted as read only.
Must have an issue in a config file on new machine or a file/directory is not
configured for write/execute.
Use ls -l to review permissions.
Use chmod to change the permissions.
10 matches
Mail list logo