Hi,
To mark signalling traffic in CCM, we can accomplish this only in Enterprise
Parameter as follows:
Dscp for SCCP phone-based services = default(0)
Dscp for SCCP phone configuration = CS3
Dscp for CCM to device interface = CS3
Or could please let me know; there is any other
This is really a gatekeeper question; take a good look at some of the
detailed syntax associated with the zone prefix command and I think you'll
find it.
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Balamurugan
Singaram
Sent: Monday, January 14, 2008 7:54 AM
To:
If a call were going from UCME number 3001 to UCM number 1001 and the
zone prefix chosen was a 1* - then your syntax might look something
like this:
zone prefix UCM 1* gw-priority 10 ucm_to_ucme_trunk_2
zone prefix UCM 1* gw-priority 9 ucm_to_ucme_trunk_1
Where 'ucm_to_ucme_trunk_2' is
Indeed correct Matt! :)
Mark Snow
CCIE #14073 (Voice, Security)
CCSI #31583
Senior Technical Instructor - IPexpert, Inc.
A Cisco Learning Partner - We Accept Learning Credits!
Telephone: +1.810.326.1444
Fax: +1.309.413.4097
Mailto: [EMAIL PROTECTED]
IPexpert - The Global Leader in Self-Study,
Hi,
For g.711 g.729 call in CCM it takes 80 kbps 24 kbps, if it is Gatekeeper
it takes 128 16 kbps.
Now if I want to pass only 2 g.729 call in WAN QOS config how should I set
the priority value and bandwidth for signal? Any suggested voice priority
signal bandwidth for layer
Hi,
FRTS question as follows:
Configure FRTS between HQ and CME site, bandwidth of 128 kbps.
Voice media traffic is strict-priority que guaranteed 33% of available
bandwidth.
Guarantee voice control traffic 5% of available bandwidth.
The solution as follows:
Method -1: