If you record message in unity ,copy over to TFTP directory in CCM, then
move it to flash on CME router, you would have to reload audio prompt.
audio-prompt load flash:en_bacd_welcome.au
//If an audio prompt file has been changed, reload it.
Rgds
On Fri, Dec 26, 2008 at 6:00 PM, anil batra wrot
CME Phone 1 ---line 1 is 3001 and line 2 is 3101
Phone 2 - line 1 is 3002 and line 2 is 3102
when the call comes on 3101 and 3001 is busy there should be call
waiting on 3001 and same for phone 2 whencall comes on 3102 and it's
busy then call waiting on 3002 if it's busy.
I will
any reason why a 6608 port PRI would show all channels as out-of-service.
It is registered with MGCP. I did not check the "check poll status" box so
the maintenence boxes don't come into effect. I even through a loopback in
the port and no go. Tried it with my crossover to my PSTN router. I kno
More then likely is a codec issue. You must go G711ulaw to BACD. If you
want G729 across the WAN/GK you will need a Xcoder at the SiteC RTR to hear
audio from a HQ phone.
Thanks,
Ryan Trauernicht
On Fri, Dec 26, 2008 at 9:57 PM, kamal yousaf wrote:
> Hi,
>
> I have setup B-ACD script on my S
That is correct. If you want skills based routing you need enhanced license
file.
2008/12/26 Mohammed-Nour
> Tony,
>
>
>
> I believe this depends on the License file you uploaded on the IPCCX
> server. Standard version of IPCC only includes limited functionality.
> Although you should be able
Hi,
I have setup B-ACD script on my SiteC router.When i call from SiteC phones
or test using 'csim start 4000', it works great. From SiteC phones, i can
hear sound and options too.
When i call script from HQ site i.e phone registered to HQ site , call
works and script answers. Yet, no sound is
Tony,
I believe this depends on the License file you uploaded on the IPCCX server.
Standard version of IPCC only includes limited functionality. Although you
should be able to run basic scripts on it.
Regards
Mohammed Nour
Network Engineer
Netlinkgroup
Email mn...@netlinkgroup.
Hi Zeeshan,
I have seen a similar issue before, and was due to the fact that the round
trip delay from my pc to the cme was over 250 ms.
Can you do a ping and check the round trip time?
If you do a "debug ephone detail", you might see output similar to the
following:
*Sep 13 10:52:09.734: ephon
Hi Zeeshan,
I have never had that issue please. Kindly double hcekc the settings under Tool
for the correct CCM IP Address which should be your CME IP address please.
HTH
Anil
--- On Fri, 12/26/08, Zeeshan Nadeem wrote:
> From: Zeeshan Nadeem
> Subject: [OSL | CCIE_Voice] IP Blue Registrati
HI,
had any one face an issue of IP Blue regestration with CCME over the vRack
.
I am trying from some day and tested with 4 PODS on proctorlabs but no luck.
Yes its working with my home CCME 3.1
ed abnormally.
--More--
*Dec 26 17:49:08.571: %IPPHONE-6-REGISTER_NEW: ephone-5:SEP001E3786E72B
10 matches
Mail list logo
