just tested i can change the menu option file however the welcome promt is not
seem to be working..
can we also change the welcome prompt in the same whay as we change the menu
option?
Thanks
saralilin2...@yahoo.co.jp saralilin2...@yahoo.co.jp wrote:
hi all,
I was having the same problem
found the problem myself.. need to add _bacd in file name of the script
saralilin2...@yahoo.co.jp saralilin2...@yahoo.co.jp wrote:
just tested i can change the menu option file however the welcome promt is not
seem to be working..
can we also change the welcome prompt in the same whay as we
This is not the first time i am configuring Gatekeepers... but often i
do get registration errors.. and i usually do troubleshoot them
but this time.. its looking impossible.. could you people please throw
some insight?? thanks a lot.
GW1 and GW2 appear to try and register to GW1 gatekeeper
You have two different zones registering with the same tech prefix. If you
follow the flow diagram showing how calls are processed on GK, you'd realize
that when you are sending the call to GK, GK is likely trying to hairpin it
back to the same gateway that sent it over in the first place
Oh, and one other thing. Look at your h323-id in both gateway
configurations. I have struggled in the past with gateways that wouldn't
register when everything was actually correct.
Try changing the h323-id to remove the @ symbol. There are some versions of
IOS that will not allow the
Joel,
I'm starting to sense dejavu here. I was firing up my gatekeeper this
morning (and it worked yesterday). Made no configuration changesand got
exactly the same thing you were describing.
I set up a couple of debugs on the gateway. I used debug h225 asn1 and
debug ras.
This
Hi list,
Actually, it all started when I tried to send a G.729 stream to CME with G.711
at CCM side. I initially had Xcoder on CME but never got invoked. I tried IPIP
GW but same result. Below is my scneario and results of the testing so far:
I've a trunk from CCM to GK with codec G.711 set.
Pod29-BR2-RTR(config-dial-peer)#application
Pod29-BR2-RTR(config-app)#service queue flash:app-b-acd-2.1.0.0.tcl
Pod29-BR2-RTR(config-app-param)#
Feb 28 20:01:03.941: //-1//HIFS:/hifs_ifs_cb: hifs ifs file read succeeded.
size=24679, url=flash:app-b-acd-2.1.0.0.tcl
Feb 28 20:01:03.945:
That's normal. A lot of the parameters throw that warning when you configur
BACD.
- Original Message -
From: hasan khalife
To: ccie_voice@onlinestudylist.com
Sent: Saturday, February 28, 2009 3:05 PM
Subject: [OSL | CCIE_Voice] B-ACD
Tonight I'm going to be working on our lab design during a maintenance
window and I was wondering if anyone here can shed some light on the details
of the v3 topology. I intend to buy the workbooks from ipexpert and our
current topology is V2 based and from another blue print.Unfortunately
How do you throw BR1 into SRST so that IP Blue will register to the BR1 router
but still be able to go via PSTN to Unity?
Hey Cliff,
There is a couple ways of doing it, but what I always do is just configure a
call-manager group with just the SUB in it and put it int the BR1 device
pool. Then assign all devices in the BR1 site to the BR1_DP (IP Blue as
well). Also, only configure the BR1 router to communicate with
Hi guys!
Yesterday, I was a working with IPExpert session and had T1 registration issue
on CAT6. I enabled the port to get an IP address from DHCP server, the port
successfully received an IP address from DHCP but when i was trying to register
it with Call Manager, it registered but after few
Put following on BR1 to trigger SRST:
ip route ccm pub ip /mask null 0
ip route ccm sub ip/mask null 0
--- On Sun, 3/1/09, Mike Brooks 2xcci...@gmail.com wrote:
From: Mike Brooks 2xcci...@gmail.com
Subject: Re: [OSL | CCIE_Voice] BR1 - SRST???
To: Cliff McGlamry cl...@mcglamry.net
Cc:
Hi guys,
Is there anyone can help me?
I am wondering which Cisco Unity Express version I need to use for prepare the
voice lab? Thanks.
Jeffrey
Its 2.3.4 for version 2
- Basant
On Sun, Mar 1, 2009 at 8:08 AM, jeffrey liujian
jeffrey_liuj...@yahoo.comwrote:
Hi guys,
Is there anyone can help me?
I am wondering which Cisco Unity Express version I need to use for prepare
the voice lab? Thanks.
Jeffrey
16 matches
Mail list logo