Hi Cliff,
Thank you for responding. I created 3 separate location for HQ, BR1, and
Trunk. Just HQ location is limited to 24K and two rests are unlimited. The
problem is if a call connection between BR2 and HQ was created first, the
BR1 phones can't call HQ phone. It prompt no enough bandwidth.
Arent u suppose to set HQ location's bandwidth to unlimited?
On Sun, Mar 22, 2009 at 4:07 PM, Allan Ren rxlm...@gmail.com wrote:
Hi Cliff,
Thank you for responding. I created 3 separate location for HQ, BR1, and
Trunk. Just HQ location is limited to 24K and two rests are unlimited. The
How many virtual servers can u put in ESXi? There are quite a number
of servers required for the new blueprint.
On Sun, Mar 22, 2009 at 1:09 PM, Arun Kumar arunv...@gmail.com wrote:
during install select 73GB HDD and 2GB RAM after install you can reduce the
amount of memory.
On Sun, Mar 22,
Hi all,
I dial hq 1001, it no answer or busy to unity and how can I configure unity so
it can forward to hq pstn number?
No AA in unity, but I found all call transfer in unity are refer to AA.
Anyone can help me? Thanks.
Jeffrey
Hi,
I have configured the srst router as moh source and it is perfectly working
for pstn calls during normal operation, but the other ip ip phone in the
brach calls it hears dead air. Am i missing anything in the config.
Also, when an hq phone call to branch phone and put on hold, audio
call transfer to subscriber then select ring this number, - input the number
91234567 remember to add call retriction table to allow this string.
jeffrey liujian jeffrey_liuj...@yahoo.com wrote:
Hi all,
I dial hq 1001, it no answer or busy to unity and how can I configure unity so
it can
srst moh is only for pstn call not for ip phone to ip phone.
Gughan Gug gughan...@yahoo.in wrote:
Hi,
I have configured the srst router as moh source and it is perfectly working
for pstn calls during normal operation, but the other ip ip phone in the brach
calls it hears dead air. Am
Hi Sara,
Thanks for your reply, It can't forward to pstn directly, no input or menu
permitted.
From: saralilin2...@yahoo.co.jp saralilin2...@yahoo.co.jp
To: liujian jeffrey jeffrey_liuj...@yahoo.com; CCIE Voice
ccie_voice@onlinestudylist.com
Sent: Monday,
your voice mail port got to have css for pstn call.
jeffrey liujian jeffrey_liuj...@yahoo.com wrote:
Hi Sara,
Thanks for your reply, It can't forward to pstn directly, no input or menu
permitted.
From: saralilin2...@yahoo.co.jp saralilin2...@yahoo.co.jp
To: liujian jeffrey
You have it backwards.
HQ should be set to unlimited. BR1 should be set to 24k. Trunk should be in
the HQ location, but in its own device pool.
- Original Message -
From: Allan Ren
To: 'Cliff McGlamry' ; ccie_voice@onlinestudylist.com
Sent: Sunday, March 22, 2009 4:07 AM
was scrubbed...
URL:
http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090322/dd35a15b/attachment-0001.htm
--
Message: 4
Date: Sun, 22 Mar 2009 22:30:30 +0900 (JST)
From: saralilin2...@yahoo.co.jp
Subject: Re: [OSL | CCIE_Voice] Unity forwarding
Hi,
well I came to the same result, vm-integrations works perfect. But you
need to do it properly.
you need to have a dial-peer, that allows you to send 10 digits + * or #
and 4 digits:
dial-peer v 10 pots
port ..
destination-p 91[2-9]..[2-9]..
prefix 1
!
Having one with
Christian,
While you can do some interesting things with the vm-integration route, you
should be aware of something.
There is no guarantee that in the actual lab exam that the pstn is going
to forward more than the 10 digits...or even process it. It's certainly
easy to set up, but if you do
I have a P4 3Ghz with 4gb running ESXi. One thing I've read and
experienced is that installing just about anything with less than the
minimum disk/memory is asking for trouble. In some unique instalaltions
you'll get it to finish but it won't work right, services won't start right,
etc.
Has
Looking for recommendations for a good chassis to run ESXi on in a home lab
that's personally funded.
Any suggestions?
Cliff,
I'm running ESXi on a Dell 530 w/Q6600, 500GB and 6GB RAM. I can run multiple
call managers(4.x,5.x,6,x 7), UCCX, Unity etc. with zero issues. The whole
setup was less than 600.00
-Mike
- Original Message -
From: Cliff McGlamry
To: ccie_voice@onlinestudylist.com
I will be out of the office starting 23/03/2009 and will not return until
06/04/2009.
I will respond to mail by Blackberry so please be patient.
After install, you can give it limited memory and it will work. Initial is
when it needs the resources. Does UCCx 7 runs on Windows or is it Linux.
If it's Linux just choose redhat 4/5.
On Sun, Mar 22, 2009 at 4:16 PM, Jeff Garvas j...@cia.net wrote:
I have a P4 3Ghz with 4gb running ESXi.
Take a look at the link. It might have already expired but just keep an eye
out on that forums.
http://www.fatwallet.com/forums/hot-deals/907712?highlight_key=ykeyword1=dell+quad
On Sun, Mar 22, 2009 at 5:12 PM, Mike O mik...@msn.com wrote:
Cliff,
I'm running ESXi on a Dell 530 w/Q6600,
It's windows 2003 Server.You install one of the four DVDs and then
install UCCx on top of that.
On Sun, Mar 22, 2009 at 7:41 PM, Duy Nguyen ccieid...@gmail.com wrote:
After install, you can give it limited memory and it will work. Initial is
when it needs the resources. Does UCCx 7 runs
To make it work for IP to IP call, you need create a new DP with a Region in
it it that speaks G711 with everybody. The idea is to create a G711 stream
between Site B phones and MOH server. MOH from Flash doesn't work when the
stream is G729.
Here is a nice link for your reference:-
hy all,
http://htluo.blogspot.com/2009/03/ccie-voice-lab-v3.html?showComment=123777408#c1837891742753148075
looks pretty interesting.. and i am actively pursuing that now i hadnt
noticed that 3750 and 3560 are similar in ios syntaxes... so in that case..
i guess.. i just have to use the
Does anyone has exact version of new V3.0?
Thanks...
well.., i am thinking of a pretty bad workaroundi dont wanna buy the sfp
trancievers... so i will use the 3500xl poe.. layer2 switch along with the
3750.. i can use trunking and i need only to connect the devices to
3500xl... like the access layer and distribution layer... i know i am just
Also, check your forwarding outdial rule in unity.
On Sun, Mar 22, 2009 at 9:48 PM, saralilin2...@yahoo.co.jp wrote:
your voice mail port got to have css for pstn call.
*jeffrey liujian jeffrey_liuj...@yahoo.com* wrote:
Hi Sara,
Thanks for your reply, It can't forward to pstn directly,
25 matches
Mail list logo