Hi Larry,
I think this way after pressing transfer it rings other party and as soon as
he picks up the phone, call would transfer to him,
Neither B can talk to C after he picked up the phone nor this requirement
would satisfy B hung up and A is connected to C.
Anyway interesting scenario.
Hello,
i have callmanager and cisco 2801 as voice gateway after configuring the
gateway as mgcp
on doing sh ccm-manager, i have the following output
sh ccm-manager
MGCP Domain Name: officeoffice.com
PriorityStatus Host
Hi,
quick note, make sure u add correct interface for MGCP on callmanager ?
Post :
sh isdn status
debug mgcp all
Cyrus
On Fri, May 22, 2009 at 6:45 PM, ABIOLA ADEFILA adefilabi...@gmail.comwrote:
Hello,
i have callmanager and cisco 2801 as voice gateway after configuring the
gateway as
Did u check that u add correct slot and VIC number on callmanager, I had
this issue before. Please confirm that for me. also please confirm that you
put FCDA.fcta.com on CCM as device name.
Cyrus
On Fri, May 22, 2009 at 7:24 PM, ABIOLA ADEFILA adefilabi...@gmail.comwrote:
On Fri, May
You need to use full name : hostname+ domain name
put FCDA.fcta.com http://fcda.fcta.com/ on ccm for device name
HTH,
Cyrus
On Fri, May 22, 2009 at 7:44 PM, ABIOLA ADEFILA adefilabi...@gmail.comwrote:
Below is the config
do i have to use the domain name on d callmanager?
also am using
Global ISDN Switchtype = primary-net5
%Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not
apply
ISDN Serial0/2/0:15 interface
dsl 0, interface ISDN Switchtype = primary-net5
L2 Protocol = Q.921 0x L3 Protocol(s) = CCM MANAGER 0x0003
Layer 1
Hi,
u have still TEI-assigned, which means u have problem .
ip domain-name fcta.com http://fcda.fcta.com/
isdn switch primary-ni
mgcp
mgcp call-agent callmanager address
mgcp bind control source-interface Loopback0
mgcp bind media source-interface Loopback0
!
ccm-manager mgcp
int s0/0:23
isdn
Does the GW shaw as registered in CM?
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Fri, May 22, 2009 at 6:35 AM, ABIOLA ADEFILA adefilabi...@gmail.comwrote:
Global ISDN Switchtype = primary-net5
%Q.931 is backhauled to CCM MANAGER
Resolved: It was a routing problem with my old VPN Client. Strange one because
everything else worked perfect(e.g. I could login on every equipment).
I installed last version(5.0.5.xx) and everything is fine.
From: ccie_voice-boun...@onlinestudylist.com
Cristian:
Glad you got it working.
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com
On Fri, May 22, 2009 at 7:48 AM, Cristi Radescu
cristian.rade...@crescendo.ro wrote:
Resolved: It was a routing problem with my old VPN Client. Strange
Hello,
i have the voice gateway configured as MGCP.
when i do sh ccm-manager, it registered after a while i keep getting
registering with CM and endpoint is now showing unknown
i need support on this
Thank you for your answers.
Right, if we have transfer-system full-consult or local-consult
configured we can make a transfer with consult so, B can Talk to C before
transfer A to C.
But the only way to do that is when B press the transfer button to proceed with
the transfer.
At CM, as
Hi Sergio,
I just tested it and it works as you said. When I put Phone B On Hook, phone A
is connected with C.
I have CME configured with full-consult.
If you will configure as full-blind when you press transfer on phone B it
will connect phones A and C directly.
But, even in this case you must
Have you been resettting the mgcp gateway in ccm and not resetting it in the
CLI? Any time you reset the mgcp gateway in ccm, you'll need to reset it
manually by doing no mgcp and then mgcp.
This is the case because you can't run the ccm-manager config commands...
since you are using a
In the CallManager, go into the gateway PRI port and click reset.
Then telnet or console into the gateway and issue the global
configuration command no mgcp. Wait 5-10 seconds and then type
mgcp.
Follow the procedure whenever you need to reset the MGCP gateway in
the lab. You want to do both
Hi List,
i can not access the Proctorlabs Web-Site. Also i can not access the vRacks via
VPN. Is anyone else encountering this?
/Robert
Not related to the modules we're studying, but I have a question that our
aspiring CCIEs may be able to answer;
1) I have a situation whereby a very basic call queue needs to be able to
send an audible notification when specific conditions in the queue have been
met.
2) The conditions to be met
It seems that there was a problem between Providers in DE and US. It now
functioning again.
/Robert
Robert Schuknechtrschukne...@gmx.de schrieb am Freitag, 22. Mai 2009 um
18:53
in Nachricht a75b6987393c831d111bd86d4723ed64:
Hi List,
i can not access the Proctorlabs Web-Site. Also i can
Cristian,
It sounds good. Which version do you have at CME and IP Phone?
Thank you, Sergio.
From: cristian.rade...@crescendo.ro
To: spoli...@hotmail.com
CC: ccie_voice@onlinestudylist.com
Date: Fri, 22 May 2009 17:08:26 +0300
Subject: RE: [OSL | CCIE_Voice] V2- CME on hook tranfer
Why do you want to make a page to the phones? This sounds like you want to do
a sort of Wallboard type functionality.
Anyways, a customer created their own custom wallboard utility. It dips into
the SQL database every x seconds and looks for status, format a web page and
pushes it to a
Is this a version 2 or version 3 lab? If on the mainline IOS (version 2
lab), and if the no mgcp / mgcp that the other guys suggested
doesn't work, do a show isdn status. If you see TEI assigned, check
to see if you have bound MGCP to a particular interface. If so, remove
the bindings, then do
Yes, exactly, this is an audible form of Wallboard functionality. Something
would have to do database check at regular intervals. Now, the other
question is; do I necessarily need Premium to do this? Currently we have
enhanced.
On Fri, May 22, 2009 at 10:27 AM, Michael Ciarfello
Hi Sergio,
I have 12.4(5b)(c2800nm-ipvoice_ivs-mz.124-5b.bin) on my router.
I don't have access at lab right now and I can't tell you exactly what version
is on IP Phones.
Hth,
Cristian
From: Sergio Polizer [mailto:spoli...@hotmail.com]
Sent: 22 May, 2009 8:16
I'm trying to install Presence for my lab. I've MCS-7845-H3-IPC1 but its
kicking me out with HW is not supported error. Is there any work around to
use the same server to install the CUPS?
In HP 7845 Cisco recommended only the following.
MCS-7845-H2-IPC1
MCS-7845-H2-IPC2
Thanks in advance.
VMWARE
On Fri, May 22, 2009 at 4:27 PM, KatGuru gkr2...@yahoo.com wrote:
I'm trying to install Presence for my lab. I've MCS-7845-H3-IPC1 but its
kicking me out with HW is not supported error. Is there any work around to
use the same server to install the CUPS?
In HP 7845 Cisco
Umm - yep - you are exactly right!
Long days developing and teaching can cause you to see doubles - err,
um, none at all :-)
Glad you caught that. Thanks. So to answer your original question -
umm - Yes Same ANI XForm Pattern!
:-)
Cheers,
--
Mark Snow
CCIE #14073 (Voice, Security)
Yep, that's one of the things about the new Linux appliances.. The hardware
support is really strict. Try an IBM or HP branded server equalivent and
you'll go crazy. But it's a LOT better than customers installing stuff on the
windows boxes and wondering why the server doesn't work anymore
I got it to work on a HP DL380 G4 with 2 72GB drives, 2GB of RAM and a
3.4Ghz Xeon
Jonathan
On Fri, May 22, 2009 at 4:27 PM, KatGuru gkr2...@yahoo.com wrote:
I'm trying to install Presence for my lab. I've MCS-7845-H3-IPC1 but its
kicking me out with HW is not supported error. Is there any
Hi,
I am trying to install CUCM 7 in vmware, during installation it gives an error
message regarding Drive: none...and abort the installation. I am using 80GB in
vmware. Any help would be greatly appreciated.
Thanks
What type of Vmware product? It could be the scsi type that the CUCM
didn't like.
On Fri, May 22, 2009 at 10:22 PM, SYED HUSSAIN
sheeraz.huss...@rogers.com wrote:
Hi,
I am trying to install CUCM 7 in vmware, during installation it gives an
error message regarding Drive: none...and abort the
30 matches
Mail list logo